• Raiser + GN Sword III of the final battle specification is the product of a normal color!
  
• Effects are clear parts. GN Sword II also included of course.
  
• Sword mode rifle mode can be converted to GN Sword III.
  
• Effects blade part of GN Sword III also reproduced in clear plastic.
  
• Accessories: GN Sword III x 1, GN Sword II x 2, GN beam saber x 2, GN shield x 1
  

Not just a recolor of the 2008 1/100 GN-0000 + GNR-010 00 Raiser Special Set, this excellent release offers a third light-up LED for the Mobile Suit's head, a brand new weapon, and all parts come molded in the same light-toned color scheme as mecha designer Kanetake Ebikawa's concept illustration of 00 Raiser!

Upon completion, the star Mobile Suit from the second season of "Gundam 00" will feature not only polycap-jointed limbs, but also a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs, plus another LED in its head that lights up the camera eyes and lens! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and two GN Shield IIs. In addition to that, the GN Sword III seen used in the show's final battle is also provided. The powerful weapon can switch between its GN Sword and GN Rifle modes, plus a beam effect part is included for realizing its destructive Raiser Sword mode! Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser!

A sheet of foil stickers and a sheet of designer's marking stickers are provided.

Three LED button light are included without batteries.

Out on Christmas season on end of Year 2008. Upon completion, the star Mobile Suit from the second season of "Gundam 00" will feature not only polycap-jointed limbs, but also a flexible Twin Drive System (GN Drives on each shoulder) with light-up LEDs, plus another LED in its head that lights up the camera eyes and lens! Setsuna's personal Mobile Suit can be equipped with the included pair of GN Sword IIs that switch from Sword to Rifle Mode, a pair of GN Beam Sabers, and two GN Shield IIs. In addition to that, the GN Sword III seen used in the show's final battle is also provided. Combine 0 Raiser with 00 Gundam by folding down its main nozzle, separating its Side Binders and attaching them to the Mobile Suit's GN Drives, and then connecting the spacecraft to the back of the mecha to complete the powered-up 00 Raiser! A sheet of foil stickers and a sheet of designer's marking stickers are provided. The powerful weapon can switch between its GN Sword and GN Rifle modes, plus a beam effect part is included for realizing its destructive Raiser Sword mode!

Inspired by Zhuge Liang from the Chinese literary classic "Romance of the Three Kingdoms," Koumei Re-GZ is offered as a nicely detailed snap-fit plastic kit! He comes with a scroll and is armed with his Bakuousen fan weapon that can transform into a Bakuouki mechanical bird.

Inspired by Taishi Ci from the Chinese literary classic "Romance of the Three Kingdoms," Taishiji Dom is now a nicely detailed snap-fit plastic kit! He wields a spiked iron rod, and comes with a support mecha that can be attached to his body to provide additional armor and claw hands; they can also combine together to form a flight unit. Weight: 150g

Inspired by Guan Ping from the Chinese literary classic "Romance of the Three Kingdoms," Kanpei Gundam is now offered as a nicely detailed snap-fit plastic kit! His weapons include a pair of Kieisou arm attachments and a Kiringa guandao that can be combined with the Ouga Ryuugetsutou weapon from Kan'u Gundam (sold separately) to form a double-bladed Souki Ryoujintou!

Inspired by Cao Cao from the original Chinese epic, Sousou Gundam is nicely detailed and comes armed with his Enkotsujin sword. Foil stickers are included so painting is not required, but would add a realistic appearance to the final product. Instructions are in Japanese but extremely well illustrated so anyone can follow them. Weight:140g

Copyright Sotsu Agency / Sunrize Item Size/Weight : 20.4 x 15 x 5.5 cm / 170g

• All the fabulous detail that you'd expect in a kit of this quality and scale,including Bandai's beloved dry-transfer decals and less-beloved clear stickers. 
  
• A 1/20 scale unpainted figure of Cagalli, in flight suit, is included. Included a base stand, weapons such as 2 beam saber, beam gun, Shield, and pistol.
  

• More than just a color variation of the MG Strike Noir Gundam, this Master Grade kit of Lukas O'Donnell's Strike E comes with its I.W.S.P. (Integrated Weapons Striker Pack) unit and a plethora of weapons to boot! 
  
• From "Mobile Suit Gundam Seed Frame Astrays" manga series, Lukas's Strike E features highly detailed inner mechanisms and a super-articulated inner frame that allow you to set it in a variety of dynamic poses. 
  
• Weapons: 3 beam rifles, two beam rifle shorty, a combined shield with gatling gun, beam boomerang, two swords, and a Grand Slam sword. Stickers and dry transfers are included for markings. Stands included too!
  

-Except for the color of the parts, this kit is identical to Perfect Grade Gundam Mk-II kit. 

This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

The perfect addition to your Perfect Grade Strike Gundam! The PG Skygrasper also comes with the Aile Striker; you can build and display them both on the included display base, or integrate them into PG Strike Gundam. All the parts are molded in colour and snap together for easy assembly; polycaps are included for joints, and Gundam Stickers are included for markings. Note: This is the only additional set designed to fit the PG Strike Gundam. 

• Improved design for placement of the caterpillar onto surface, allowing better posture control for the turrets. 
  
• Linked movement for the caterpillar, allowing flexible movement. 
  
• Caterpillar has the feature of resistance to the surface when rotating. 
  
• Dozato Carrier in front and behind the chassis can be deployed. 
  
• Stands included to show the docking sequence of Core Fighter to Guntank. 
  
• Suspension mechanism for the capital unit can be reproduced. Head has lighting effect. 
  
• LED unit included. Figures & accessories included: stand for the Core Fighter, cockpit figure (Hayato), fighter cockpit figure x2 (Ryu, regular), standing figure x 4 (Bright, Mirai, Hayato, Ryu). Total 16 runners, dry transfer decal & clear sticker included. Weight: 2kg
  

• Released Date: 2001 Well armed with two beam sabers and 12 1.3MW funnel remote beam weapons. 
  
• From the head to the individual finger joints to the 10 funnel systems, each can be individually posed and removed. 
  
• The shoulder armor opens just like the prototype. 
  
• Binder with accureate details and thruster. 
  
• Details opening cockpit area. 
  
•  Weight: 1kg
  

Armors can be taken off to express NADLEE version. GN cannon on the shoulders can be slided to recreate battle mode. NADLEE's hair can be moved to express movement. GN bazooka in two modes (normal and battle mode). Double joint system in arm articulations. Waist supported with axis cover parts for balanced posing. Various wrists and foil stickers included.

Here -  is the HG series kit of the Gundam Virtue in Trans-Am Mode, as seen in the first season of Mobile Suit Gundam 00. The GN cannon barrel can extend, and the connector arm is posable, allowing for dramatic shooting poses from the show. The GN cannon and leg unit sides slide to open into GN field mode. GN bazooka barrel can slide to replicate burst mode. Foil stickers are printed in appropriate colors for Trans-Am mode as well.

• A new paint scheme and shark-mouth marking, and the removal of the bar at its front top, dress up this twin sibling of the MG Ball Ver. Ka (Katori Version). 
  
• Includes clear "Gundam Stickers" with various in-scale warnings and markings on them. 
  
• Once built and clad in its armor, the posable Ball can be displayed on the included stand and base (includes figures of two standing mechanics and a seated pilot).
  

• I'm going to skip obvious puns like "Bandai Strikes Gold!" and just get to the good stuff: 
  
• The Hyaku-Shiki gets the MG treatment! The results are incredible. 
  
• Bandai has engineered this piece so that the beautifully gold plated pieces have very fine sprue attachment points to make assembly easy. 
  
• Just use care in removing the numerous perfectly plated gold pieces from the tree. 
  
• As usual with a Bandai MG series everything moves via poly-cap joints. 
  
• Leg and arm armor can be removed. A beautiful kit and a real attention-getter on display.

• A paintable Hyaku-Shiki! This fantastic master-grade kit comes with everything you need to build a supremely poseable Hyaku-Shiki, carrying the Ballute System. 
  
• No gold plating means you can build the kit out of the box if you like (all the parts are coloured, naturally). 
  
• Two teeny tiny 1/100 figures of Char I mean Quattro are included (one standing, one seated for the cockpit). Weight:860g
  

• Metallic coating in addition to its fantastic detail, high quality, and super posability! 
  
• The Mobile Suit is equipped with its high energy beam rifles, Super Lacerta beam sabers, beam shield, Xiphias rail guns, and its most distinctive and powerful weapon of all, the Super Dragoon mobile weapon wings, which can extend and detach from the main wing frames. 
  
• In-scale, silver-color figures of pilot Kira Yamato (sitting and standing) and Lacus Clyne are included. 
  
• Stickers and dry-transfer decals are provided, along with a custom display base to assist with dynamic poses. Weight:1776g
  

• Characteristic GN Drive is accurately recreated! 
  
• Whole body specially designed to accommodate the GN-X’s unorthodox frame while keeping the MG range of motion and stability! 
  
• Cockpit hatch opens, and cockpit interior is detailed, and figures for both Peries and Sergei are included! 
  
• Following in the wake of the extremely successful Gundam Exia, the updated frame features the characteristic hex binder, and is built to allow maximum mobility! 
  
• Accessories: GN Beam Rifle, GN Beam Rifle Long Equipment, GN Beam Saber, GN Shield
  

Extreme Rare Item !!!The Huge Gunpla set! Over one meter (40 inches/ 100cm) long from the tip of the main gun barrel to the rear fins. It includes with the 1/144 scale GP-03S Gundam. Kit is packed with features, including opening weapons bays, posable claw arm manipulators, two large-size beam sabres, removable I-field generator, micro-missile pod, cluster missile pod, guided bombs and more, display stand.Gundam Unit that's worth collectionTechnical and Historical Notes:During its military reconstruction following the devastating One Year War, the Earth Federation contracted a private company, Anaheim Electronics, to develop a series of new Gundam-model mobile suits to serve as conceptual testbeds for new and improved mobile suit technology. The third of these new prototypes to be produced by Anaheim was the RX-78GP03 Gundam, code-named "Dendrobium." The Dendrobium was composed of two units: the RX-78GP03S Gundam mobile suit itself, code-named "Stamen"; and the large RX-78GP03 Gundam mobile weapon unit, code-named "Orchis." The Orchis was an unmanned unit, and required the Stamen - which itself had a pilot - to be docked with it for it to function. Since the GP03 Dendrobium was designed as a defense unit for space installations capable of taking on enemy mobile armor, the Orchis component was basically a large spacegoing vehicle, equipped with enough thrusters to make it a fast interception unit. Its primary heavy armament was a large mega beam cannon, mounted on its own movable arm for aiming, and it also had two large claws which incorporated large beam sabers capable of slicing up something as large as a battleship. The Orchis also mounted an external I-field barrier generator, giving the GP03 complete 360-degree protection from enemy beam weapons fire. For versatility, it also mounted two large weapons container pods, which could carry a variety of weapons from micromissile launcher pods to battleship-sized demolition chain mines. Spare weapons containers could be loaded out ahead of time, and the Orchis could have empty pods changed out for new ones in a matter of minutes. The GP03S Stamen was completed at Anaheim's Von Braun City lunar factory and delivered to their La Vie en Rose research dockship, where the Orchis component had also been completed. The only thing left to make the GP03 field-ready was piloting and combat data. However, with the shutdown of the Gundam Development Project, Earth Federation Forces security officer Nakahha Nakato dismissed all of the Anaheim research staff except for systems engineer Lucette Audevie. With the threat of the Delaz Fleet and the impending colony drop crisis, Lucette strongly argued for the GP03's completion, all to no avail. To face this desparate situation, Gundam pilot Kou Uraki and the crew of the assault carrier Albion literally hijacked the GP03 - with the assistance of Lucette and at the cost of her life - and quickly fielded the Dendrobium, proving to be a devastating foe to the Delaz fleet escorting their hijacked colony falling towards Earth.RX78 + GP03's Extreme battle:

• This new kit of the God Gundam features the new "Fighting Action" frame system. This all new design is made from ABS plastic and screws together, so it's free from sticky work - glue. 
  
• No polycaps! This Gundam kits is extremely strong and holds positions without the sagging that earlier poly-cap designs suffered from. 
  
• The back and chest pannels also can be open to duplicate the "Hyper-Mode" from the anime series. 
  
• Flexible in posting. All parts are pre-colored nicely and snap together with instruction included. 
  
• Dry transfers for markings. 
  
• Domon Kasshu was included a figure of the pilot. 
  
• Two sets of hands - one standard and one in clear yellow to replicate the look of the energy ball attack.
  

• The newest Mobile Suit Gundam: Iron-Blooded Orphans is the Grimgerde! 
• Its internal frame recreates the look of the Valkyrie Frame. 
• On the outside, its armor is up-detailed for 1/100! 
• Its head opens, and of course, it’s armed with a rifle and two blades!

Included for limited customisation are two left hands and two right hands, in day-glo orange plastic so you can pretend he's powering up with the mighty God Finger. Cute~~~ Weight: 500g