Here's a sharp HGUC snap-fit plastic kit of MS-06FZ Zaku II FZ (Kai) as it appeared in the "Mobile Suit Gundam 0080: War in the Pocket" OVA series. Molded in color, this kit features polycapped joints and movable skirt armor that allow it to be set in dynamic poses. An optional Zaku B-type head is also included, along with an MMP-80 90mm machine gun, three hand grenades (molded as one part), and a heat hawk. A sheet of foil stickers and a Zeon marking sticker are provided to add detail to the completed model.

A great kit of this rather busy-looking variation on the Zaku. Includes beam rifle, beam cannon, heel claws, backpack and shoulder armor. Snap assembly. Molded in final colors. Very reasonable price considering the number of parts.

Original Zaku in the superb 1/144 HGUC series (note that some overseas arms of Bandai repackaged the "8th MS Team" version of the Zaku, and formed it in red plastic, calling it Char's Zaku, but that was never released in Japan, and a completely different tooling from this item). 

Recreate the heated battle scenes seen in the "Mobile Suit Gundam MS IGLOO 2: Gravity Front" OVA or build your own custom One Year War battlefield diorama with this impressive HGUC set offering! Included are snap-fit parts that come molded in color and allow you to build a HGUC mass production type MS-06 Zaku, which can be equipped with weaponry consisting of a Zaku Machine Gun, Heat Hawk, a pair of three-tube missile pods, Zaku Bazooka with two firing effect parts, two Crackers, and two Sturm Fausts. Three pairs of optional hands are provided. Also packed in this set are two Type-615+ E.F.G.F. M61A5 main battle tanks with two explosion effect parts, two PVN.4/3 Wappas, plus four Zeon and four Earth Federation soldiers (figures come molded in gray). A foil sticker and a sheet of waterslide marking decals are included.

ZZ Gundam makes the move to HGUC! To preserve the outstanding detail and proportions, transforming is accomplished via interchangeable parts. The 'Double-Zeta' can be transformed between Core Fighter, Core Top, Core Base, and G Fortress modes. As part of its arsenal, the ZZ Gundam features a Double Beam Rifle, two Hyper Beam Sabers, and Missile Pods. When displaying it in G Fortress Mode, part of the frame is used as a base. This piece also holds parts which are not used when in certain modes. Foil stickers are also provided. - Also comes with a stand base that makes balanced display possible. - Accessories: Hyper Beam Saber, Core Fighter, Double Beam Rifle, Display Stand

By adding several new armor, weapons, and engine modules the engineers of Taskforce Alpha's Pegasus III were able to upgrade the basic MSA-0011 S Gundam into the super powerful Ex-S Gundam. The Ex-S Gundam has almost double the power of the original S Gundam, making it a fearsome unit indeed. The Ex-S Gundam still had three cockpits, but Ryu Roots was the only person who piloted the mobile suit, and due to Ryu's poor piloting skills it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.
With ALICE functioning as the co-pilot of the Ex-S Gundam "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could still take full control of the Ex-S Gundam, or any of its various components or weapons, at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryu were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and "she" was more than capable of compensating for Ryu's lack of skill.

For defensive purposes the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block which could nullify ranged beam attacks made against the mobile suit. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more after burners, additional propellant tanks, and thrusters.

Two new large thruster units were mounted on the Ex-S Gundam's back, giving the unit incredible thrust power and speed. Two large caliber beam cannons were mounted on both of the thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two large hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.

The Ex-S Gundam also had remote weaponry in the form of an incom, which was a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. But the Ex-S Gundam also featured two reflector INCOMs, stored in brackets in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs could not fire their own beams but instead were able to reflect incoming beam fire from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.

Like its predecessor, the Ex-S Gundam was also capable of undergoing a transformation into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam re-combined into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and the Ex-S Gundam would travel in this mode whenever it needed to travel over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in actual combat situations the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser would reach the battlefield and transform into the Ex-S Gundam.

The kit may be tiny but the ideals behind it are infinite! This 1/144 high-grade kit of the Justice Gundam is beautifully shot in colored plastic, with fantastic detail as is usual for Bandai. All parts snap together. Instructions are simple, clear illustrations, to make building a breeze. The finished kit is poseable thanks to several polycaps in the joints (but be careful balancing with that backpack on!). Stickers are included for detail. Paint and glue are not necessary, but paint might enhance the appearance of the finished model. History of Justice Gundam In mid CE 71, ZAFT created a series of advanced mobile suits based on technology reverse-engineered from the captured Earth Alliance G Project suits. Like their EA predecessors, the ZAFT Gundams are armed with advanced beam weaponry and protected by Phase Shift armor. One of these suits is the Justice, which can be considered the sister unit of the Freedom. Most of the Justice' and Freedom's systems were tested on the YFX-600R GuAIZ Experimental Firearms Type. Late in CE 71, Athrun Zala, former pilot of the Aegis, is assigned the Justice with the mission to either recapture or destroy its stolen sister unit, the Freedom. Instead, however, Athrun joins forces with his old friend Kira Yamato, in defending neutral Orb from an Earth Alliance attack. Later he met up with the support vessel Eternal which carried both METEOR units. Athrun and Kira used the METEORs' firepower to thwart an Earth Alliance nuclear missile attack on the PLANTs on the final day of the war, and Athrun also destroys the GAT-X131 Calamity with his METEOR's beam sword. Afterward, Athrun flies the Justice inside the gamma ray laser GENESIS and self-destructs it, preventing his father's doomsday weapon from firing on the Earth. Over two years later, a more close-combat-oriented advanced version of the Justice is built by Terminal, called the ZGMF-X19A Infinite Justice, which is again piloted by Athrun Source:Wikipedia

Starter Pack # 2. For those looking to get into the Gunpla Hobby, here's the perfect fit. This set will include the HG RX-78-2 Ver. G30th and come with a 'Step Up Manual' which will show you little tips and tricks to give your model a better look. It will also come with a Gundam panel line marker!

• The star Mobile Suit from the second season of "Gundam 00" is now a sharp snap-fit model kit! 00 Gundam comes in easy-to-assemble plastic parts that are molded in color, along with a sheet of foil stickers, so painting is not necessary (but would add a more realistic appearance).
• Upon completion, its polycapped joints will give the Mobile Suit a wide range of motion for a world of posing possibilities! 
  
• The Twin Drive System (GN Drives on each shoulder) are flexible, and the included pair of GN Sword II can switch between Sword Mode and Rifle Mode. A fine kit of a well-designed mech!
  
• Add on XN-Raiser to become XN 00 gundam

Item Size/Weight : 25.5 x 19 x 5.5 cm / 218g

• With agility and arsenal galore, Gundam Seed's Buster Gundam was designed for action--and this High Grade kit from Bandai brings out this 'bot's best! 
  
• Typical Bandai HG quality with beautiful detail, snap assembly, and full poseability with poly-caps. Comes with stickers for the details that are not molded in color. Molded in Bandai's patented multi-gate technology that allows multiple colors on one tree. Parts are pre-colored, but painting will enhance appearance. Slick! 
  
•  Item Size/Weight : 29 x 19 x 6 cm / 265g
  

Weight : 265g

RGM-79(G) GM Sniper

HG Astray Blue Frame

- Dry Suit Gundam UC Center edition of HGUC finally!
- UC, of course, ZZ was at arms also included!
UC Gundam comes armed with a bazooka and the heat was at saber. ZZ appeared in more Tomahawk beam, the beam is attached Lancer. The beam section is a clear reproduction.
- Beam Gatling reproduced!
Gatling reproduction is characteristic of the sensor inside the drive sleeve. The slide mechanism is also reproduced by the replacement cover.
- Reproduce Toraiburedo!
The back is equipped with three armed Toraiburedo center dedicated dry. Stored state, each state included three deployments.

- Accessories: bazooka, heat saber, beam tomahawk, beam Lancer, fist (right)
Have the manual grip (left), Toraiburedo (Stuffed expanded state) x— 3 each

• 4th Platoon immortal] Jim Cannon II on the HGUC sortie! 
  
• Completely reproduce a serious, dignified form. 
  
• Camera head is clear and reproducible. 
  
• Beam Cannon is moving 90 degrees. 
  
• Reproduce the sword saber storage. 
  
• Various hand parts are included. 
  

Another one of the Innovators' superior Mobile Suits gets the HG plastic kit treatment, this time featuring Bring Stabity's melee-type Garazzo! This sharp snap-fit kit comes molded in color and features polycapped joints for striking action poses. It comes equipped with its signature pair of GN Beam Claws, and the shield part on its left shoulder armor can slide out to display it with GN Field activated. Garazzo's backpack houses the cockpit and its GN Drive, and can be detached from the Mobile Suit as an escape pod. A sheet of foil stickers and a display stand are provided. Accessories: 2 and 2 and 2 and special stand × flat part of the hand × 1 grasp person × beam saber Technology and Combat Characteristics Garazzo is designed to be a melee-type MS, possessing superior mobility, strength, and speed; capabilities that exceed those of A-Laws' GN-X MS units and highly formidable against Celestial Being's Gundams; Garazzo possesses enough physical power to subdue a Gundam. Garazzo has a similar appearance to Gadessa, retaining much of the frame and weapons such as the GN Cutters and GN Vulcans while having spikes to the head, shoulders, knuckles, and a large shield built onto its left shoulder. Its shoulder-shield can slide open to generate a GN Field, capable of deflecting and shielding against Celestial Being's beam weaponry. Its armament includes beam claws, stored inside the fingers of its hands, which can be combined into two beam sabers; these beam sabers have enough power to slice through 00 Gundam's GN Sword IIs. For long distance missions, Garazzo has a optional GN Booster that can connect to its legs and increase its speed. Garazzo also has an improved version of the GN Drive Tau that can rival the performance of a Third Generation Gundam's original GN Drive. There is a Gundam face hidden behind its face. Near the end of the war against Celestial Being, Garazzo was even equipped with its own Trans-Am System, of which its design was copied from Celestial Being via espionage. Source:wikipedia Reviews by Versus Z

Not just any custom-colored Mobile Suit of the Human Reform League's Tieren model, this hot pink Tieren Taozi is customized for the use of super-soldier Soma Peries! A highly capable machine that manages to battle on par with Celestial Being's Mobile Suits, the Tieren Taozi has a weapons loadout that includes a 200mm x 25 caliber smoothbore gun (space type), carbon blade, and a 30mm machine gun. Fully articulated upon completion with the use of polycap joints, this kit has other movable parts including its mono-eye and the flexible shields on each shoulder. A sheet of foil stickers is included for detail. Not a drop of glue or paint required, although painting it would add a more realistic appearance.

• MS appeared in the person to be judged Mobile Suit Gundam Gaiden] Sega Saturn
  
• Commercialized in HGUC series [Blue Destiny Unit 2].
  
• Groin axis movable to reproduce the rifle poised by Standing knee.
  
• In addition to the normal moving around, the shaft shoulder is also reproduced on the mobile, can reproduce the scene more realistic shooting.
  
• Sort deployed in parts with the same storage unit on the outside of the shin saber reproduce the internal mechanism.
  
• Marking included.
  

MSM-04 Acguy

- Unicorn Gundam Unicorn mode and Destroy mode are both released at the same time! Unicorn Gundam Unicorn mode is No.101 of HGUC - By eliminating the transformation gimmick between unicorn mode and destroy mode, a higher quality and proportion has been obtained. - By replacing the parts that moves in the anime, the image of transformation has been emphasized without actually transforming. - Uses the PS material that doesn't contain ABS, great for paint users. - Use of new type polycap allows increased posing range. - Includes: Shield (Closed) x1, Beam Saber (with beam) x2, Hyper Bazooka (Closed) x1

• Undefeated Eastern schools, HGFC fought! Teacher and Student Showdown Masutagandamu VS Shining!
  
• Includes a huge part Shainingufinga effects. God Gundam can be installed into.
  
• Fingasodo also included.
  
• Supermode can be reproduced with the deployment of replacement parts of the head!
  
• Koaranda removable.
  
• Accessories: hand grip for the left saber hand grip, left Shainingufinga, Bimusodo core length, Short Sword core beam, sword, finger シャイニングフィンガーエフェクトパーツ
  

- Undefeated Eastern schools, HGFC fought! Teacher and Student Showdown Masutagandamu VS Shining! - Favorite horse [restart Fuuun] together make your emergency. - Reproduce the mantle retracted during deployment. Work which can be replicated in the play peek hand from the cloak. - The base of the cross is a master / sculpture unbeaten 144 east. By adjusting the cut position Can be held in Masutagandamu. - Includes: Cape (Osamu Osamu expanded range), cross-hand grip + master effects, amazing fist heaven Ishiba, left Hirate, Dakunesufinga left, right and left wrist postures

Two kits in one, this HG G Armor kit comes with parts to build the G Fighter and the RX-78-2 Gundam! Not a speck of detail is lost, even in this fairly small scale; The G Fighter can transform into the G Blue, G Blue E-z, G Sky, and G Sky E-z, when completed. The RX-78-2 is transformable, too (well, its lower half comes off!) to allow you to build the Gundam Sky. Neat PVC caterpillar tracks are included for the G Blue and G Blue E-z (the tracks can also be retracted into the body of the main machine), and an unbuilt display base allows you to show off the various modes to their very best effect! Of course all the parts are molded in coloured plastic, and snap together, so no paint or glue are required. Polycaps are included for all the movable joints; foil stickers are included for detail. Don't miss out on this terrific set!

Sharp HG kit of the main machine from "Gundam SEED Destiny", the Force Impulse Gundam. A neat design that transfers well to a HG kit, with parts molded in colour and all featuring snap assembly (so no glue or paint are required); and to make it even more appealing, the Force Impulse Gundam is transformable when finished, breaking down into the Force Silhouette, Chest Flyer, Leg Flyer, and Core Splendour! Instructions for building the model and for transformation are included -- all in Japanese but clearly illustrated for ease in use.

Bandai's new HG version of the new flying mecha from Gundam Seed does a nice job on this very attractive design, without making you spend a fortune! Check the pose in the lower right photo below; yes, this machine's legs are really that flexible, even in this scale! And those finned jet units off the back are very cool, too. Have fun!

Accessories: Shigurubureido, needle gun × 2 (reproduced only molded knee).