Price Clear







Gundam Model Kits

Showing 1 - 30 of 448 products

img
SAVERM122.00

MG 1/100 Sword Impulse Gundam

  • Armed with many compressed gimmicks and purified proportion, here is the arrival of Sword Impulse Gundam! 
  • You can remove the Beam Boomerang from Sword Silhouette, and it can combine to be used as a large boomerang. 
  • The separation gimmick to Sword Silhouette had been fully reproduced! - Includes: Excalibur Laser anti-battleship blade x2, Sword Silhouette x1, Flash Edge Beam Boomerang x2, Beam Shield x1, Beam Rifle x1, Boomerang effect x2, Excalibur effect parts x2, Nose cone x1, Sword Silhouette stand base x1

RM171.50
RM171.50 Add to cart
img
SAVERM122.00

MG 1/100 Delta Plus

  • The completely transformable Delta Plus Mobile suit appears as an MG! 
  • Using careful modeling techniques, this kit can transformation mechanism to Wave Rider form is fully realized!
  • Wave Rider form equipped with a locking mechanism to prevent accidental collapse.
  • Shield contains storage gimmick for Beam Sabers.
  • Suit designed by mechanical designer Hajime Katoki.
  • Scale pilot figures included.

RM171.50
RM171.50 Add to cart
img
SAVERM129.50

MG 1/100 RGZ-95 ReZEL Gundam

- Based on the design of the Zeta Gundam, this mass produced MS is the next step in the Federation's MS army ! 

- Transformation mechanism accurately recreates this MS's shift into Wave Rider form while preserving the Suit's unique proportions!
* Wave Rider form grants heightened mobility and speed!
- Plus one gimmick and armed mechanism included.
- Full weapons system! Mount the Beam Rifle saber bayonet, access the arm-mounted Beam Saber storage. Beam Saber magazines are detachable, and extra magazines can be stored in the shield. 
- Includes all the details that we've come to expect from a modern MG!
* Rear Windshield reproduced in transparent elements. 
* Cockpit hatch opens, and scale pilot figure included.

- Accessories: Beam Rifle, Beam Saber x 2, Shield
Item Size/Weight : 39.2 x 31 x 8.3 cm / 814g

RM182.00
RM182.00 Add to cart
img
SAVERM84.70

MG 1/100 RX-79(G) Gundam Ground Type

RX-79(G) Gundam Ground Type.  

- Gundam from The 08th MS Platoon series. 

  History of Gundam Ground Type RX-79(G): The RX-79[G] Gundam Ground Type was used most notably by the Kojima Battalion operating in Southeast Asia, which fielded 12 RX-79[G] units, with the other eight participating in various operations on Earth. However, because the RX-79[G] were constructed from spare RX-78 parts, repair of damaged units became a tricky matter due to the unavailability of replacement parts. The result was the creation of custom RX-79[G] units such as the RX-79(G)Ez8 Gundam Ez8 piloted by Kojima Battalion 08th MS Team commander Shiro Amada, or Karen Joshua's Gundam with a GM Ground Type head. Federation Research and Development used three RX-79[G] units in their EXAM development program (see entry on Blue Destiny below).  

RM119.00
RM119.00 Add to cart
img
SAVERM122.00

MG 1/100 MS-14S Gelgoog Char Custom Ver.2.0

MS-14S Gelgoog Char Custom Ver.2.0


Late in the One Year War, the Y designation was removed and the Gelgoog Commander Type was given a limited production run. With a more powerful generator and thruster output, the Commander Type even surpassed the performance of the feared RX-78-2 Gundam, as proven by Char Aznable in Texas Colony and in Solomon space.

RM171.50
RM171.50 Add to cart
img
SAVERM122.00

MG 1/100 00 QAN[T]


  • The main MS from Mobile Suit Gundam 00 the Movie- Awakening of the Trailblazer has already been chosen for a Master Grade release! 
  • Combination gimmick for the sword bits allows for a more accurate reproduction!
  • Sword bits can be attached to the GN Sword V to create either the Buster Sword or Buster Rifle modes.
  • The Bit A and Bit B combines to form a new weapon. (MG Original Gimmick)
  • The pose with the Buster Sword armed looks great! Also comes with the Action Base
  • (Black) to display with!
  • Uses the GN Shield bits firing form as new mechanism.
  • Each lens parts are clear, reproduced vividly. The letters that shows up, and the lines have
  • been reproduced with laser processing and foil sticker.
  • The GN-Drive at the chest has been reproduced with panel-line mold. The panel-line that
  • creates a sense of machinery has been produced specifically for the development of MG.
  • Accessories: GN Sword V, GN Shield, GN Sword Bit A/B/C, 1/100 Pilot Figure
  • (standing/sitting), Action Base 2

RM171.50
RM171.50 Add to cart
img
SAVERM134.50

MG 1/100 RGZ-95C ReZEL (Commander Type)

- The difference between aircraft equipped with General : wing binders, with mega beam launcher,Change the color of the color forming part of the aircraft commander. - Supplier of linkage with the deformation mechanism to improve the proportions! - Sabre, of arms and grenade built to reproduce the mechanism of armed! - Opening and closing the hatch. Reproduction and internal Mekamorudo, MG dent made to provide details of the brand we all expect. - Accessories: mega beam launcher, beam saber × 2, Shield

RM189.00
RM189.00 Add to cart
img
SAVERM97.10

MG 1/100 RX-78GP03 Gundam Stamen

  • The GP-03S gets the MG treatment and as usual the results are superb. Includes a folding bazooka, beam rifle, beam saber and folding shield. The core fighter is detachable. 
  • Armor is detachable to expose the skeleton and hydraulics. Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. 
  • The rocket packs are moveable and the hatch opens on top to allow access to the beam sword. The shield folds up to be stored on the arm. The left arm opens and the claw extends outward. 
  • Two types of hands are included -- fists, and posable (moving fingers). All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  • Of course, the use of cement and paints will improve the appearance of a finished model.

RM136.50
RM136.50 Add to cart
img
SAVERM129.50

MG 1/100 Gundam Epyon EW

  • Gundam Epyon is newly designed in the EW version. 
  • It can be completely transformed from the MS mode into the flying mode. 
  • Thanks to "the pullout system", you can reproduce its heat rod's whip. 
  • Various gimmicks give expression to "Soryu". Its neck, mouth and hand claws are movable.
  • Includes marking stickers designed by Hajime Katoki.

RM182.00
RM182.00 Add to cart
img
SAVERM122.00

MG 1/100 Gundam Deathscythe-Hell EW Ver.

  • Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  • Uses the XXX-G Frame developed during the animation!
  • Marking work is designed by Hajime Katoki.
  • Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  • New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  • Able to reproduce the flapping from the animation naturally. 
  • The closed state of the Active Cloak can also be reproduced with a natural form. 
  • Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 

RM171.50
RM171.50 Add to cart
img
SAVERM104.60

MG 1/100 GN-001 Gundam Exia

  • The first MG from Mobile Suit Gundam: 00, this long-awaited kit delivers on every level! 
  • Thanks to advances in kit design, the inner frame moves along with the outer armor to recreate the Exia's unique range of motion! 
  • GN Condensers on the arms/chest/legs are double-layered, clear plastic to reproduce the look of real lenses, giving it a more accurate appearance.
  • Each GN Code piece throughout the body of the Exia is recreated in clear plastic to mimic the look of the Suit in the anime! 
  • Includes custom marking seals and Gundam Decals.
  • Includes GN Code decal sheet.
  • GN drive completely reproduced. As with in the anime, the GN Drive can be removed
  • stand included to hold the Drive while it's not with the Exia.
  • Accessories: GN Sword x1, GN Long Blade x1, GN Short Blade x1, GN Beam Dagger x2,
  • GN Beam Saber x2, GN Shield x1, 1/100 Setsuna F. Seiei figure x1

RM147.00
RM147.00 Add to cart
img
SAVERM130.00

MG 1/100 Destiny Gundam

  • Recreating the unique features of this dynamic Mobile Suit, Mobile Suit Gundam SEED Destiny -titular Suit is reincarnated as a Master Grade kit! 
  • Moveable gimmick tuned to the movement of the collar area.
  • Gimmick included to expand the hip joint, allowing for a wider range of motion.
  • Accurate proportions highlight the characteristic silhouette of the Destiny Gundam. 
  • Includes 1/100 scale figures of Sinn and Stella.
  • Stand features a wing motif.
  • Accessories: High-Energy Long-Range Beam Cannon x1, Arondight Beam Sword x1, Beam Rifle x1, Shield x1, Beam Boomerang x2, Effect Part (Blade) x3, Effect Part (Boomerang) x2, Effect Part (Shield) x1, Beam Cannon Manipulators x2 (Left and Right), 1/100 Pilot Figure x2

RM182.00
RM182.00 Add to cart
img
SAVERM104.60

MG 1/100 Wing Gundam Zero Custom

Wikipedia information
  • The XXXG-00W0 Wing Gundam Zero (aka Wing Zero) is a mobile suit that appears in Mobile Suit Gundam Wing and its sequel OVA/movie Endless Waltz. Though having many pilots during its lifetime, the unit was most famously piloted by the series main protagonist Heero Yuy. 
  • Wing Gundam Zero was designed by the five engineers fifteen years prior to the events of the Eve Wars, the Wing Zero is the ancestor of the five Operation Meteor Gundams (Wing, Deathscythe, Heavyarms, Sandrock, and Shenlong). Designed with "Perfect Victory" in mind, it boasts exceptional abilities and is one of the two suits which utilize the ZERO System (the other being the Gundam Epyon), but because of this dangerous mental interface, it was kept hidden away until Quatre Raberba Winner desperately built it following his father's death. Like the Wing Gundam, it can transform into a high-speed flight mode dubbed "Neo-Bird Mode." Further, its twin buster rifle has more than twice the output of the Wing Gundam's buster rifle, giving it enough power to destroy an entire space colony or resource satellite in a single shot. It features hidden thrusters in the shoulder armor, where the armor splits open to reveal the nozzles. The feet also house powerful thrusters in order to give the Neo-Bird Mode extreme speed.

RM147.00
RM147.00 Add to cart
img
SAVERM62.40

MG 1/100 Shining Gundam

Transform into Super Mode 1/20 Domon in Virtual Suit is included. Shining Finger and other fighting hand parts are included.

RM87.50
img
SAVERM97.10

MG 1/100 Wing Gundam EW Ver.

  • Release quickly following the release Endless Waltz: The Glory of Losers- the MG Wing Gundam! 
  • Tons of new features! 
  • Molded in updated colors as shown in EW! 
  • New package art creates a unified look for the MG Endless Waltz series! 
  • MG EW series produce a sense of a new package!
  • Marking decals designed by Hajime Katoki.
  • Parts expand for performance-based dynamic posing! 
  • Accessories: Twin Buster Rifle, Shield, Beam Saber, E-Pac x2

RM136.50
RM136.50 Add to cart
img
SAVERM134.50

MG 1/100 Gundam Astray Red Frame Kai

  • From the graphic novel Mobile Suit: Gundam SEED VS Astray: the MG Gundam Astray Red Frame Kai!
  • Equipped with two main weapons: the metallic-bladed Gerbera Straight and Tiger Pierce Katanas.
  • Sheaths can be attached at the hip- one on either side, or held by the Suit's manipulators.
  • The Tactical Arms IIL has been recreated in its customized form, and includes custom Action Base 2. 
  • Tactical Arms IIL can shift into Flight mode or Arrow mode, and beam effect has been reproduced using clear parts.
  • Suit can equip Tactical Arms IIL (Sword Mode) on the back.
  • Includes: Gerbera Straight, Tiger Pierce, Tactical Arms IIL, 1/100 Scale Lowe Guele Figure (standing/seated)

RM189.00
RM189.00 Add to cart
img
SAVERM58.90

MG 1/100 Rick-Dias Red Version

  • Built-in Phalanx cannons stored in the head give this Suit a strong defense weapon.
  • Features huge rear skirt and knee armor, as well as upgraded thrusters.
  • Can convert from Quattro Custom to standard Rick Dias! 

RM140.00
RM140.00 Add to cart
img
SAVERM268.90

MG 1/100 G Armor Real Type Color

  • "Mobile Suit Gundam" G armor of Real Type Color (Gundam+G armor) that got into the news occasioned of the boom at the broadcasting this time with the movie poster etc. 
  • is reproduced. Another marking etc. attached are newly scheduled. - Can be combined with the G-Fighter and Gundam to create "G-Armor," "G-Sky," "G-Sky Easy," "G-Bull," "G-Bull Easy," and "Gundam High Mobility" modes! 
  • Main body and others accessory - Beam rifle: 1 - Beam saber: 2 - Shield: 2 - Hyper bazooka: 1 - Collaboration only for action base: 1

RM378.00
RM378.00 Add to cart
img
SAVERM146.90

MG 1/100 00 Gundam Seven Sword/G

  • From Mobile Suit Gundam 00V: the variant of the Gundam 00- the 00 Gundam Seven Sword!
  • Includes an arsenal of weaponry. 
  • Both the Suit and weapons are packed with gimmicks!
  • Includes new kneecap parts unique to the Seven Sword!
  • Includes all Seven Swords and the GN Sword II Blaster! 
  • GN effect parts are reproduced using clear parts, and fixed joint are installed for easy weapon manipulation. GN Sword II Blaster features an expandable hilt, and can be mounted onto the binder.
  • Both Shield and Sword mode mode of GN Buster Sword II can be reproduced!
  • LED unit (sold separately) can be installed for a more accurate look!
  • Also includes GN Sword II Long and Short (both featuring gimmicks), and GN Katars can be connected to shift to shield form!

RM206.50
RM206.50 Add to cart
img
SAVERM97.10

MG 1/100 MS-06S Char's Zaku II Ver.2.0

  • Here's Char's Zaku II, getting a "Ver. 2.0" update more than a decade after its first MG kit release.
  • This kit features a completely revamped inner frame construction that allows for even greater range of articulation and realistic movement; it's even able to be posed kneeling on one leg as seen in the show!
  • Aside from the improved articulation, one of the major features of this kit is the incredible new molding process that has two different sections of the pipes molded together for easy slide assembly.
  • Weapons include a Zaku machine gun, Zaku bazooka, and a heat hawk. Two types of blade antennas are included along with a lift vehicle to bring the included 1/100-scale standing Char Aznable (molded in red) to the cockpit.

RM136.50
RM136.50 Add to cart
img
SAVERM276.70

MG 1/100 PMX-003 THE-O

  • It -  is the 15th anniversary of the Master Grade line! The fans demanded it, and thanks to new kit technologies, it -  is finally possible! Standing at over 9 inches tall and weighing in at almost a pound and a half, the massive S-class kit: The O! 
  • At just under 1.5lbs, the massive inner frame and joint support structure emphasizes weight distribution while retaining the level of detail that you will come to expect in a Master Grade kit.
  • Hidden arms accurately recreated for this kit with moving fingers and folding gimmick.
  • Highlighting the power and scale of this mammoth Mobile Suit, the legs of this kit have a full, heavy feeling to ground the kit for display! 
  • The full body of the kit is highly detailed for a style worthy of the 15th anniversary MG kit! 
  • Accessory: Beam Rifle, Beam Sword x4

RM490.00
RM490.00 Add to cart
img
SAVERM97.10

MG 1/100 Gundam Age-1 Normal

  • The MG gene is passed on to Gundam AGE's first generation- the Age-1 Normal!
  • Currently being broadcast, Mobile Suit Gundam: AGE's first generation lead Suit is the first to be recreated as a Master Grade kit. Based on the design notes of Kanetake Ebikawa, this suit is packed full of detail. Foil seals cover the chest and head emitters, representing lights, and various gimmicks are built in.
  • Head: Neck junction and rear helmet are detailed
  • Shoulders: Rear shoulder armor (flaps, thrusters) is detailed 
  • Waist: Connectors, as well as waist armor is detailed
  • Legs: inner leg armor. Near the point behind the movable armor is subjected to detail throughout.
  • Knee: Knee can be recreated using seals or elements. 
  • Feet: Rear foot is detailed, and sole design incorporates verniers. 
  • Accessories: DODS Rifle, Shield, Beam Saber x2, Beam Dagger x2,
  • Pilot Figures (Standing, Sitting)
  • Item Size/Weight : 31.1 x 20.1 x 11.3 cm / 561g

RM136.50
RM136.50 Add to cart
img
SAVERM109.50

MG 1/100 Eclipse Gundam

Product Detail

Eclipse Gundam, which is characterized by its sharp form, is the leading MS of this work.

Equipped with variants of MS form and MA form, it is three-dimensionalized as MG.

Able to transform into Mobile Suit Form or Mobile Armor Form (MA Form)

Can fit with other accessories such as Aile Strike Backpack, launcher weapon, sword weapon etc [Not included]

Other information - pending from official update

RM190.00
RM190.00 Add to cart
img
SAVERM32.00

Daban 8819 MG 1/100 Gyunei Guss's Jagd Doga Model Kits

Daban 1/100 8819 MSN-03 Jagd Doga Model Kit
 
Material: ABS
Scale: 1/100
 
Include:
- Model kit to build main figure
- 6 Changeable hands
- 2 Beam sabers
- Beam Assault Rifle
- Shield
- Other accessories
- Decal

RM118.00
RM118.00 Add to cart
img
SAVERM124.50

MG 1/100 DOM Ver. 2020

From Mobile Suit Gundam, the popular MG 1/100 Dom has been upgraded with new molds and parts updates!
Improved exterior parts such as the waist and arms with a new mold. In particular, the shape of the arm has been modified so that the connection between the shoulder and forearm looks natural, and the joint structure of the elbow has also been redesigned.
A forward swing mechanism is mounted on the connection between the shoulder and the torso. The impressive pose of holding the giant buzz reduces the interference of each part and is decided smoothly.
A swing movable structure is newly adopted for the hip joint. In addition, the range of motion of the legs has been greatly expanded by adding movable axes to the thigh connection and updating the waist side armor.
The internal frame of the ankle has been changed to reproduce Dom\'s characteristic crouched pose.
A wealth of weapons such as Giant Buzz, Raketen Buzz, and Sturm Faust are included.

[Accessories]
  • Heat Saber x 1
  • Giant Buzz x 1
  • Raketen Buzz x 1
  • Sturm Faust x 2
  • 90mm Machine Gun x 1
  • Water slide decal x 1

RM175.00
RM175.00 Add to cart
img
SAVERM60.00

Daban 6656 MG 1/100 Unicorn Gundam Perfectibility

Daban 6656 MG 1/100 Unicorn Gundam Perfectibility


Scale : 1/100
Series : Unicorn Gundam
Brand : Daban
Grade : Master Grade

Please note that this is Not Bandai product

RM160.00
RM160.00 Add to cart
img
SAVERM23.00

Daban 8824 MG 1/100 MSZ-006 P2/3C Zeta Gundam Red Zeta Gundam

Daban 8824 MG 1/100 MSZ-006 P2/3C Zeta Gundam Red Zeta Gundam

Brand : Daban
Scale : MG 1/100

Please note that this is not Bandai product

RM115.00
RM115.00 Add to cart
img
SAVERM40.00

DABAN 8826 MG 1/100 Astray Gold Frame Amatsu Hana

Brand : Daban 
Code : 8826
Scale : Master Grade 1/100

Item Contents : 
  • Body Unit
  • "Maga no Ikutachi" Energy Absorption Blade
  • "Trikeros Kai" Offensive Shield System
  • "Totsuka no Tsurugi" Saber
  • "Trikeros Kai" Offensive Shield System
  • Sword
  • Dedicated Standbase
  • Water-slide decal

RM160.00
RM160.00 Add to cart
img
SAVERM30.00

P-Bandai: MG 1/100 Lightning Strike Gundam Ver. RM

Premium Bandai has announced the release of the Lightning Strike Gundam Ver. RM to their Master Grade lineup! This kit shares the same molds with the Ver. RM MG Aile Strike Gundam with some newly molded parts for its Lightning Striker Pack. The pack was originally released to celebrate the launching of the Gundam China Project (GCP) in 2021 exclusive in red color schematics.

A sheet of water slide decal designed specifically for the Lightning Striker is also included in the kit! The kit is also completed with the railgun \"70-31 type electromagnetic farming gun\" that is also exclusive for the Lightning Strike Gundam!

The Lightning Striker expansion pack is also available via Premium Bandai for those who already own the regular released MG 1/100 Aile Strike Gundam Ver. RM .

RM350.00
RM350.00 Add to cart
Get ready to upgrade your collection with the exceptional Master Grade Gundam models. These high-quality Gunpla models offer the ultimate building experience, showcasing intricate details and accurate representations of the iconic Mobile Suits from the Gundam universe. In this blog post, we will take you through our top picks for the List of Master Grade Gundam. Whether you are a seasoned builder or just starting out, our Collection of Master Grade Gundam models has something for everyone.

Discover the best Master Grade Gundam available at www.gundam.my and get a glimpse of what sets them apart from the rest. From the intricate inner mechanics to the stunning outer design, these Overview of Master Grade Gundam figures will leave you in awe. Moreover, gundam.my guide you through the best Guide to the Best Master Grade Gundam to help you find the perfect model for your collection.

In addition, Master Grade (MG) is a line of Gunpla kits based on Mobile Suit Gundam anime series. It was first produced by Bandai in 1995 as part of the Gundam 15th Anniversary project.

Master Grade gundam are 1/100 scale kits designed and made to higher standards than High Grade (HG) kits but fall under Perfect Grade (PG) kits.

In 2002, Bandai started releasing a Master Grade line under the label of Ver. Ka (Version Katoki), in honor with veteran designer Hajime Katori.

Showing 1 - 30 of 448 products