• Home
  • Gundam Model Kits

PRODUCTS

Price Clear







Brand

Availability

Gundam Model Kits

Showing 91 - 120 of 453 products

Quick View
img
SAVERM139.40

MG 1/100 Unicorn Gundam (OVA Ver.)


  • Picking up three years after Char’s Counterattack in UC93, Mobile Suit Gundam Unicorn continues the saga of the Universal Century!
  • In full collaboration with the hobby division’s Hajime Katoki, the Unicorn Gundam becomes fully realized as a three-dimensional Master Grade! 
  • With a strong emphasis on accurate form, the Unicorn Gundam can shift from Unicorn Mode into NTD (Destroy) Mode! 
  • NTD Modes features an expanding armor, and the Psychoframe is recreated using transparent red elements to bring out the unique look of the Destroy Mode Unicorn! 
  • Height increases in Destroy Mode.
  • Recolored and featuring new details updated from the Unicorn Gundam Ver.Ka.
  • Accessories: Beam Magnum, Extra Magazine x2, Beam Saber x2, Shield, Hyper Bazooka
  • Picking up three years after Char’s Counterattack in UC93, Mobile Suit Gundam Unicorn continues the saga of the Universal Century!
  • In full collaboration with the hobby division’s Hajime Katoki, the Unicorn Gundam becomes fully realized as a three-dimensional Master Grade! 
  • With a strong emphasis on accurate form, the Unicorn Gundam can shift from Unicorn Mode into NTD (Destroy) Mode! 
  • NTD Modes features an expanding armor, and the Psychoframe is recreated using transparent red elements to bring out the unique look of the Destroy Mode Unicorn! 
  • Height increases in Destroy Mode.
  • Accessories: Beam Magnum, Extra Magazine x2, Beam Saber x2, Shield, Hyper Bazooka
  • Weight : 925g

RM196.00
RM196.00 Add to cart
Quick View
img
SAVERM97.10

MG 1/100 God Gundam

  • This new kit of the God Gundam features the new "Fighting Action" frame system. This all new design is made from ABS plastic and screws together, so it's free from sticky work - glue. 
  • No polycaps! This Gundam kits is extremely strong and holds positions without the sagging that earlier poly-cap designs suffered from. 
  • The back and chest pannels also can be open to duplicate the "Hyper-Mode" from the anime series. 
  • Flexible in posting. All parts are pre-colored nicely and snap together with instruction included. 
  • Dry transfers for markings. 
  • Domon Kasshu was included a figure of the pilot. 
  • Two sets of hands - one standard and one in clear yellow to replicate the look of the energy ball attack.

RM136.50
RM136.50 Add to cart
Quick View
img
SAVERM159.40

MG 1/100 MSN-02 Zeong

  • Pull-out hip and shoulder joints.
  • All joints are movable fingers 10.
  • Mono Movable nozzle head and ears.
  • Refer to the left and right arm stand.
  • Detachable head.

RM224.00
RM224.00 Add to cart
Quick View
img
SAVERM109.60

MG 1/100 RX-78GP02A Gundam Physalis

There are 16 runners of parts here. Those shoulder "binders" are particularly interesting, especially the way the outer nozzle pivots downward. 


The "atomic bazooka" can be mounted in the hand in firing position, or it breaks down into two pieces, the barrel mounting in the inside of the shield (see photo), with the remainder mounting on the GP02's back. 

Comes with the usual stickers, inner-mechanism detail, multiple sets of hands, beam saber, rifle. Simple instruction included in a box. 
Weight: 806g. 

RM154.00
RM154.00 Add to cart
Quick View
img
SAVERM82.00

Daban 8828 MG 1/100 Destiny Gundam Metal Build Alike Version

Brand : Daban
Code : 8828
Model : Destiny Metal Build Alike
Scale : 1/100
Grade : Master Grade

Please note that this is NOT Bandai products

RM198.00
RM198.00 Add to cart
Quick View
img
PO PriceRM168.00

Shenma Model 1/100 GK Style Rising Freedom Gundam Assembly Model Kit

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : AUG 2026
Estimate arrival : SEP 2026

- P-O Price RM168.00
- Deposit RM20.00, Balance RM148.00
- We will inform to make balance RM148.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Product Overview
Brand: SHENMA MODEL (GOLD HORSE MODEL)

Type: It is described as a "GK style plastic model kit" and a "multi-colored, snap-together plastic model." Unlike a traditional resin kit, this model does not require glue or paint for assembly.

Appearance: The finished product exhibits a high level of detail, with a sharper aesthetic compared to standard kits. It stands approximately 19 cm tall.

Features and Accessories
Articulation & Transformation: The kit features a detailed build and is fully transformable into a mobile armor flight mode. The backpack detaches to form a separate fighter support vehicle.

Weapons: The kit includes a modified beam rifle, beam sabers, and a shield that can generate a large beam effect part.

Inclusions: The package comes with a set of interchangeable hands, a white action base (stand) for displaying the model in dynamic poses, and water-slide decals for detailing.

Pilot Figure: The reviewer notes the absence of a pilot figure in the cockpit but expresses hope that it will be included in the final release.

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Add to cart
Quick View
img
PO PriceRM228.00

Explosive Model MG 1/100 God Gundam MB Version with Metal Inner Frame

Explosive Model MG 1/100 God Gundam MB Version with Metal Inner Frame


Brand : Explosive Model
Scale : 1/100
Grade : Master Grade

Content Overview:

* Packaging: The model comes in a plain brown cardboard box labeled simply with "kami-01".
* Manual: A multi-color instruction manual with detailed assembly diagrams in Chinese. It includes a section showing the completed inner frame and armor.
* Decals: Standard water-slide decals and metallic foil stickers are provided.
* Runners (Plastic Sprues): The kit contains numerous runners molded in various colors:
- Gold metallic plated runners for the V-fin, joints, and thrusters.
- Red, blue, white, and yellow armor pieces.
- Gray runners for the inner frame.
- Translucent green and pink effect parts for the chest reactor and beam sabers.
- Clear plastic runners.
* Inner Frame: The kit features a pre-assembled, highly articulated dark metallic gray and silver alloy inner frame, allowing for complex poses.

Assembly and Build Review Notes:
* Head: The V-fin requires careful assembly, with small red and white parts layered onto the gold frame. The head has excellent articulation.
* Body: The chest features a translucent green reactor with a gold frame.
* Backpacks: The kit includes two swappable backpack units. One is the standard God Gundam backpack. The other is a larger, custom backpack unit featuring massive wing binders.
* Wing Binders (Custom Backpack): These binders have complex folding and articulation. They can mount the beam rifle/sword handles, which transform between a folded rifle mode and an extended sword/beam rifle blade. The custom binders feature red, white, and gold color separation with clear yellow-to-red gradient effect parts attached for a high-energy look.
* Arms: The shoulder armor features white, red, and gold parts with small "NJ" decals. The arm joints are noted to be slightly loose. The forearms feature blue armor plates that can open to reveal gold claw-like parts for the "God Finger" attack.
* Hands: A variety of manipulator hands are provided, including standard holding hands, open splayed hands, fists, and articulated hands. Some hands come molded in translucent neon green and yellow.
* Waist: The front and side skirt armors are highly articulated, with the side skirts featuring blue plates that can flip out.
* Legs: The leg armor features white and red parts with gold vents. The knee armor is articulated to open. The ankle armor is also articulated.
* Base: The kit includes a custom display stand with a grey base and an articulated arm designed to hold the model in dynamic poses, including the "Energy Ring" effect. The stand uses alloy parts for strength.

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Add to cart
Quick View
img
PO PriceRM132.00

Ryan Model ZG003 MG 1/100 Thunder Cosmos Production Zaku II with Cannon Sniper Rifle with LED Light Set

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : AUG 2026
Estimate arrival : SEPT 2026

- P-O Price RM132.00
- Deposit RM20.00, Balance RM112.00
- We will inform to make balance RM112.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

\r\n
###############################################################

Ryan Model ZG003 MG 1/100 Thunder Cosmos Production Zaku II with Cannon Sniper Rifle with LED Light Set (Gundam Thunderbolt Ver.)

Brand : ?? Model
Scale : 1/100
Grade : MG

Package Include :
- Action Base
- Water Decal
- LED Cannon Light Set (3 magnetic orange lights)

Please note that this is Non-Bandai product

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Add to cart
Quick View
img
PO PriceRM118.00

Daban 8839 Providence Gundam Metal Build alike Plastic Model Kit

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : AUG 2026
Estimate arrival : SEP 2026

- P-O Price RM118.00
- Deposit RM20.00, Balance RM98.00
- We will inform to make balance RM98.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Daban 8839 Providence Gundam Metal Build Alike Plastic Model Kit

Brand : Daban 
Code : 8839
Model : Providence Gundam
Type : Metal Build alike Plastic Model Kit

Please note that this is Non-Bandai product

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Add to cart
Quick View
img
PO PriceRM179.00

[Comet Technology] MG 1/100 The Red Comet Sinanju Stein (Red Triple Speed)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : DEC 2025
Estimate arrival : JAN 2026

- P-O Price RM179.00
- Deposit RM60.00, Balance RM119.00
- We will inform to make balance RM119.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
MG 1/100 The Sinanju Stein (Red Triple Speed)

This product is based on the "Professional Art" GK assembled outer armor, combined with a full set of skeletons and weapons and equipment.
The model's golden emblems are all electroplated independent parts, the thruster nozzles are all electroplated parts, and the waist power tube is standard metal electroplated parts.

Brand : Comet Technology
Size: Height about 220mm
Scale: 1/100
Type: Assembled model
Material: Plastic

Others: The golden emblems on the whole body are all electroplated gold independent parts, the thruster nozzles are all electroplated parts, the waist power tube is standard metal electroplated parts, including the new white wolf color water sticker.

DEPOSIT: RM60.00
DEPOSIT: RM60.00 Request Stock
Quick View
img
PO PriceRM75.00

[Phantom Model] MG 1/100 GNX-603T GN-X

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : FEB 2025
Estimate arrival : MAR 2025

- P-O Price RM75.00
- Deposit RM20.00, Balance RM55.00
- We will inform to make balance RM55.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Phantom Model MG 1/100 GNX-603T GN-X

Material: ABS
Scale:1/100
Color : Black White
 
Including:
- Model kit runners to build MG 1/100 GNX-603T GN-X
- Decal

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Add to cart
Quick View
img
PO PriceRM138.00

Black Horse Model MG 1/100 Turn X with Moonlight Butterfly Effects (Non-Bandai)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : MAY 2026
Estimate arrival : JUN 2026

- P-O Price RM138.00
- Deposit RM20.00, Balance RM118.00
- We will inform to make balance RM118.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Black Horse Model MG 1/100 Turn X with Moonlight Butterfly Effects (Non-Bandai)

Brand : Black Horse
Scale : 1/100
Grade : Master
Include : Moonlight Butterfly Effects

Please note that this is Non-Bandai product

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Request Stock
Quick View
img
PO PriceRM189.00

Celestial Being Plan 1/100 Sniper Lockon GK Style (Fortune Meow Design) Gundam Dynames (Non-Bandai)

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : OCT 2026
Estimate arrival : NOV 2026

- P-O Price RM189.00
- Deposit RM20.00, Balance RM169.00
- We will inform to make balance RM169.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
Product Name: Celestial Being Plan 1/100 Sniper Lockon GK Style (Fortune Meow Design) Gundam Dynames (Non-Bandai)

GK Transformable Fighter: Features GK detail and color separation, and can transform into a high-speed flying fighter mode
Dual replaceable antennas, a deployable large missile bay, and a chest-mounted magnetically illuminated light assembly

Scale: 1/100 MG series GK detailed assembly model

Please note that this is Non-Bandai product.

DEPOSIT: RM20.00
DEPOSIT: RM20.00 Request Stock
Quick View
img
PO PriceRM260.00

MG 1/100 Gundam Liberty Astray Red Frame

This is a P-O Product

Please read all the detail and condition before make order.
Release Date : DEC 2026
Estimate arrival : JAN 2027

- P-O Price RM260.00
- Deposit RM50.00, Balance RM210.00
- We will inform to make balance RM210.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer.
- Deposit payment are non-refundable.

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################
This is a posable, high-grade or better injection-plastic kit of an item from the Gundam universe.

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
Quick View
img
SAVERM70.00

P-Bandai: MG 1/100 Altron Gundam EW Ver. (Nataku)

Note : Box is slightly dented but the runners are still in good condition.

From "MOBILE SUIT GUNDAM WING?Endless Waltz", the MG 1/100 Altron Gundam has finally been made available into a kit!
???
???Mobile Suit XXXG-01S2
???Wufei named this machine "Nataku"
???
From “MOBILE SUIT GUNDAM WING Endless Waltz", the MS Altron Gundam, enhanced version of the Shenron Gundam,
releases in the Master Grade Series.
It is named “two-head dragon(er-tou-long)?ALTRON” because of the characteristic weapon “Dragon Hang” equipped on both arms,
and now reproduced with a new design which is based on Master Grade standards.
????
* The 2 characteristic weapons is repoduced with new design!
??Includes the Dragon Hang and Twin Beam Trident with a new design based on Master Grade standards.
??
?(Dragon Hang)
??The stretch structure which shows the storage and attack position of the arm is recreated.
??The claw tip is movable on two-axis, and can be stretched, opened and closed.
??An arm block for extension is included, and it is possible to obtain a powerful pose display according to the scene.
??Includes 2 auxiliary stands which allows a stable display of the Dragon Hang for the attack pose.
?
?(Twin Beam Trident)
??The handle comes with various detailed new parts.
??Output ports are at both ends, which allows to mount the clear molded beam blades onto both sides.
??After removed the Beam Blades, the Beam Trident can be attached and carried on the backpack.
??
* Comes with BRAND NEW Character Figures??
????Includes a newly designed same-scale figure of Chang Wufei wearing the uniform of Marimeia troops (standing / sitting)
?
* Comes with a new design of water slide decals!
?
Weapons: Dragon Hang x 2 / Twin Beam Trident

RM380.00
RM380.00 Request Stock
Quick View
img
SAVERM80.00

[Super Nova - MoXin] XXXG-OOWO MG 1/100 Wing Gundam EW Ver.

[Super Nova - MoXin] XXXG-OOWO  MG 1/100 Wing Gundam EW Ver.


- The wing feather effect is included
- Drei Zwerg Weapon Unit is included
- Dedicated Action Base is incduded

RM180.00
RM180.00 Request Stock
Quick View
img
SAVERM82.00

[Hobby Star] MG 1/100 Gundam Astraea with water decal

[Hobby Star] MG 1/100 Gundam Astraea

- Made in China 
- Made by Hobby Star
- High Quality 
- MG 1/100 
- Height of Gunpla about 18 cm 
- This product come with Action Base 
- This product come with Dalin Water Decal  
- This product come without LED set 
- need to assembly yourself

RM178.00
RM178.00 Request Stock
Quick View
img
SAVERM80.00

P-Bandai : MG 1/100 Blast Impulse Gundam

Release date : March 2020

Estimate delivery : April 2020

The long awaited Impulse Gundam variant is finally coming to the Master Grade GunPla series! 

The Blast Impulse Gundam comes with entirely new mold for its "Blast Silhouette" offering variety of gimmicks that fits in today's GunPla standards!

[ACCESSORIES]
  • Blast silhouette
  • Defiant beam javelin
  • Beam rifle
  • Shield

RM300.00
RM300.00 Request Stock
Quick View
img
SAVERM70.00

P-Bandai: MG 1/100 Shenlong Gundam EW (Liaoya Unit)

P-Bandai: MG 1/100 Shenlong Gundam EW (Liaoya Unit)

The Master Grade Shenlong Gundam will be packed with its Glory of Losers weapon, Liaoya.

[ACCESSORIES]

  • Liaoya
  • Shenlong Shield
  • Dragon Fang
  • Beam Trident
  • Action Base
The kit will also include a newly printed water slide decal for detailing.

RM290.00
RM290.00 Request Stock
Quick View
img
SAVERM20.00

P-Bandai: MG 1/100 Jegan Type D

P-Bandai MG 1/100 Jegan Type D

Release Date : April 2019
Estimate Delivery : May 2019

[ACCESSORIES]

  • Beam Rifle
  • Beam Saber
  • Shield
  • Hand Grenade

RM260.00
RM260.00 Request Stock
Quick View
img
SAVERM306.70

MG 1/100 Ex-S Gundam / S Gundam

Previously released back in 2003, Bandai's upgraded Master Grade kit of the Ex-S Gundam/S Gundam from "Gundam Sentinel" features some parts inspired by the MG Deep Striker! You can assembly it as the Ex-S or the S, and you can display it in its separated forms (G Core, G Attacker and G Bomber) too. The head, shoulders, chest and backpack are all inspired by the Deep Striker, and the shape-changing parts of the abdomen are also reshaped. This kit is molded in color so painting isn't necessary. 


Accessories:

- Beam smart gun
- Beam saber/beam cannon (x2)
- Incom 3x3
- Foil sticker sheet
- Marking sticker sheet
- Lead wire (x3)
- Screw (x27)

RM460.00
RM460.00 Request Stock
Quick View
img
SAVERM40.00

P-Bandai: MG 1/100 Dwadge [ZZ Ver.]

P-Bandai: MG 1/100 Dwadge [ZZ Ver.]

[ACCESSORIES]
  • Giant Bazooka
  • Heat Tomahawk
  • Heat Saber
The Mobile Suit Gundam ZZ version of the Dwadge was finally revealed and will join the Master Grade series in April 2019 as initial release by Premium Bandai.

Molds and joints of the MG 1/100 Dom has been updated to accommodate the design of Dwadge. With extended articulation and new molds for its joint parts, this will surely look good beside your collection!

Head
  • Dom's head design has been remolded to produce Dwadge's head vulcans.
Body
  • Power pipes on its shoulder connecting from its chest to the backpack were added to the molds!
Backpack
  • The entirely new mold of the backpack surely is packed with details and equipped with joints to store some of Dwadge's weapons.
Rear Skirt Armor
  • Dwadge will not be complete without its rear skirt vents which has been remolded entirely from the MG Dom.
Legs
  • Legs were also reshaped to accommodate the drop tanks on it.
Equipment
  • Added details to the Giant Bazooka's barrel.
  • A double edged heat tomahawk is also a new sight for this kit!
  • A remolded heat saber's hilt for a better stability.

RM310.00
RM310.00 Request Stock
Quick View
img
SAVERM154.40

MG 1/100 Gundam NT-1 Ver.2.0

- Gundam NT - 1 appeared in Ver. 2.0 from [Mobile Suit Gundam 0080 war in the pocket].

- Proportions and detail that followed the image in the play. Due to the multiple structure, even the inner walls of the inner frame and armor are reproduced.
- For the sealing of the shoulder joints, recreating the texture of `wrinkle` by adopting vinyl material.
- As MG original gimmick, when installing Chobam armor, it is possible to develop Gatling when carrying a shield.
- Reproduce the thruster development when chobam armor is installed.
- [Breaking blade antenna for reproducing during the play] and [BB Fighter Gundam NT - 1] 's original gimmick as [Bonus Parts] [Headgear] comes with it.

[accessories]
*  Chobam * Armor x 1 set
Blade antenna (broken state) x 1
*  Beam * saber x 2
Beam rifle x 1
*  Shield x 1
*  Hyper *  bazooka x 1

[Product content]
*  Molded article x 22
*  Vinyl material x 1 set

*  Seal x 1
*  Marking stick x 1
*  Instruction manual x 1

RM217.00
RM217.00 Request Stock
Quick View
img
SAVERM61.00

[Super Nova -MoXin] 1/100 MG XXXG-01D2 Deathscythe Gundam

MG 1/100 Deathscythe Gundam from [Super Nova - MoXin]

- MG 1/100 Deathscythe Gundam from Wing Gundam EW Series 

- From MoXin , previously known as Super Nova
- Pre-painted black and white colour 
- Self assembly required

Others Gundam from the same Series

1. [Super Nova] 1/100 MG XXXG-01S2 Nataku Gundam (Green)
2. [Super Nova] 1/100 MG XXXG-01S Nataku Gundam (Blue)
3. [Super Nova] 1/100 MG XXXG-01SR2 Sandrock Custom
4. [Super Nova] 1/100 MG XXXG--01H2 Heavyarms Custom Gundam
5. [Super Nova - MoXin] XXXG-OOWO MG 1/100 Wing Gundam EW Ver.

Kindly note that this kit is a NON-BANDAI product.

RM139.00
RM139.00 Request Stock
Quick View
img
SAVERM100.00

Special Coating : MG 1/100 Dynames Gundam (Third party paint job)

Special Coating : MG 1/100 Dynames Gundam


Ready stock

- Original Bandai product
- Special Coating Version
- Third party paint job

RM450.00
RM450.00 Request Stock
Quick View
img
SAVERM100.00

P-Bandai: MG 1/100 Gundam Heavyarms EW [Igel Equipment]

Premium Bandai announces the release of the Glory of Losers equipment version of Gundam Heavyarms!

The kit is provided with of course, entirely new mold for the Igel armament. This kit is being released to follow up the Shenlong Gundam [Liaoya Unit] that was initially released in May 2019.

[ACCESSORIES]
Beam Gatling
Army Knife
Beam Saber
Shield
Igel Armament Set

RM380.00
RM380.00 Request Stock
Quick View
img
SAVERM298.00

Gundam Fix Figuration Metal Composite MS-06C Zaku II

Release Date : Apr 2020
Estimate Delivery : May 2020

-Mobile suits that everyone knows, [Mass production type Zaku II] appears in GFFMC

-Commercialized [MS-06C Zaku II C type] from [Mobile Suit Gundam THE ORIGIN] to GUNDAM FIX FIGURATION METAL COMPOSITE.
-Coloring and marking are newly three-dimensionalized by Mr. Hajime Katoki supervising the aircraft that can be said to be the origin of MS alongside [Char Zaku II] released from the brand.

-Proportion reproduction by Hajime Katoki. Characteristic [green] is reproduced with coloring except for a part.
-Produces a sense of weight and texture using die-casting.
-Various poses in the play can be taken with abundant movable parts. Each part has a slide gimmick to achieve both range of motion and design.
-Reproduce the Zaku II C type shape with new molding on the chest parts.
-Head parts can be replaced to reproduce a captain with an antenna or a general machine without an antenna.
-In addition to abundant armament, [Bazooka B for MS] is included with new modeling. The single-shot type B1 and the magazine type B2 can be reproduced. Furthermore, the magazine can be suspended on the right shoulder shield.
-You can select the number of each part of the aircraft with the attached decal seal.

- set content
  • Body
  • 4 types of wrist left and right for replacement
  • Zaku Machine Gun
  • Zaku machine gun magazines
  • Bazooka A for MS
  • Bazooka B for MS
  • Bazooka A-type spare magazine x 2
  • Bazooka B-type spare magazine x 2
  • Bazooka A replacement parts
  • Bazooka Type B replacement parts
  • Bazooka latch parts left and right
  • Heat Hawk (long)
  • Heat Hawk (Short)
  • Replacement antenna parts
  • Dedicated pedestal
  • Decal seal

RM900.00
RM900.00 Request Stock
Quick View
img
SAVERM258.20

Gundam Fix Figuration Metal Composite thq RX78-02 Gundam (40th Anniversary Ver.)

Reissue Date : Apr 2020
Estimate Delivery : May 2020

-[Gundam] with original coloring specification commemorating the 40th anniversary

-Commemorating the 40th anniversary of Mobile Suit Gundam, commercialized [RX-78-02 Gundam] from the high-brand GUNDAM FIX FIGURATION METAL COMPOSITE produced by Hajime Katoki.
-A movable pedestal can be set and displayed in a floating state.
-This is a luxury commemorative product with a new marking and drawing by Hajime Katoki.

-New coloring and marking specifications for products now.
-A set of recombination parts and weapons for various situations.
-A luxurious package with sleeves drawn by Hajime Katoki.

- set content
  • Body
  • 2 types of beam rifles
-  shield
  • Bazooka x 2
  • Core Pod
  • Shoulder cannon
-Replacement wrist left and right 3 types each
  • Beam saber x 2
  • Various body replacement parts
  • Dedicated pedestal

RM850.00
RM850.00 Request Stock
Quick View
img
SAVERM40.00

P-Bandai : MG 1/100 Yzak Joule's Slash Zaku Phantom

It only took a short time for Bandai Spirits to extend the parts of MG Lunamaria's Gunner Zaku Warrior to make the Yzak Joule's Slash Zaku Phantom! This kit comes with variety of newly molded parts, from its backpack to its weapon set.

Its body shares the same mold with the previously released Lunamaria's Gunner Zaku Warrior with added parts. Its MA-MR Falx G7 Beam Axe has given a mechanism gimmick for it to transform into 2 different modes. It also has a deactivated gimmick that can be mounted on its back skirt armor! Each beam effects of the Axe are molded in clear pink plastic with pointy features.

The entirely new molded backpack offers some great detailing, it is a defined version of its MMI-M826 "Hydra" Gatling Beam Cannon that has never seen before in GunPla form! The kit aslo comes with a special water slide decal specifically for Yzak's Slash Zaku Phantom!

[ACCESSORIES]
  • Hydra Gatling Beam Gun
  • Falx G7 Beam Axe
  • Beam Assault Gun
  • Shield x 2
  • Beam Tomahawk
  • High Performance Explosive

RM350.00
RM350.00 Request Stock
Quick View
img
SAVERM60.00

P-Bandai : MG 1/100 Gundam Deathscythe EW [Rousette]

The Gundam Deathscythe EW Rousette Unit is finally coming to the Master Grade series! The kit shares the same molds with Gundam Deathscythe EW regular retail model kit that was released in 2010. This kit, of course comes with its completely newly molded Glory of Losers equipment called \"Rousette\" which adds a backpack unit to the Deathscythe to give it more aerial mobility.
The Rousette unit can also be folded into different modes; the normal mode which is folded towards its back when not in use, and flight mode where it\'s wingspan is extended to the sides to give some flight ability to its main unit. The kit is completed with all the Gundam Deathscythe EW equipment plus a sheet of water slide decals for detailing.

[ACCESSORIES]

* Rousette unit
* Beam Scythe
* Buster Shield

RM320.00
RM320.00 Request Stock
Get ready to upgrade your collection with the exceptional Master Grade Gundam models. These high-quality Gunpla models offer the ultimate building experience, showcasing intricate details and accurate representations of the iconic Mobile Suits from the Gundam universe. In this blog post, we will take you through our top picks for the List of Master Grade Gundam. Whether you are a seasoned builder or just starting out, our Collection of Master Grade Gundam models has something for everyone.

Discover the best Master Grade Gundam available at www.gundam.my and get a glimpse of what sets them apart from the rest. From the intricate inner mechanics to the stunning outer design, these Overview of Master Grade Gundam figures will leave you in awe. Moreover, gundam.my guide you through the best Guide to the Best Master Grade Gundam to help you find the perfect model for your collection.

In addition, Master Grade (MG) is a line of Gunpla kits based on Mobile Suit Gundam anime series. It was first produced by Bandai in 1995 as part of the Gundam 15th Anniversary project.

Master Grade gundam are 1/100 scale kits designed and made to higher standards than High Grade (HG) kits but fall under Perfect Grade (PG) kits.

In 2002, Bandai started releasing a Master Grade line under the label of Ver. Ka (Version Katoki), in honor with veteran designer Hajime Katori.

Showing 91 - 120 of 453 products