• Astray has been MG-ed for the very first time! Appearing in [VS Astray], the Astray Blue Frame Second Revise has been released in MG!
• The outer layer slides as the arms parts and the legs parts move accordingly. The shoulder parts and stomach parts gained its large mobility due to the pulling mechanism used.
• Able to improve the variety of poses using the Action Base (sold separately)
• Tactical Arms II (sold separately) can be placed on the base included to take its fighting stance.
• Complete Transformation of the back pack form into the Large Sword/ Gatling Arm.
• The transformation of the Tactical Arms to the Flight Form and Blade Form has been completely reproduced.
• The Gatling Gun and the two blades can be separated. The grip of the sword expands, and can be attached to the elbow side. (Beam also reproduced.)
• Comes with the following: Tactical Arms II (with exclusive action base), Amour Schneider x2
• Copyright Sotsu Agency / Sunrize Weight : 849g

• Bandai has finally answered the cries of Gundam fans worldwide for an MG kit of F91! 
  
• Format with anime-accurate detailing and very flexible and fully-articulated body frame, allowing for a wide variety of poses. 
  
• Included top part of Lafressia acting as a base whereby you can connect a stand to it and the Gundam F91 to the stand to display it flying away from Lafressia or heading straight at it with all weapons drawn!
  

The only Zeon MG from 08th MS Team, the Gouf Custom ditches the Gouf's close-combat weaponry for more ranged weapons. However, it retains all the elements of the Gouf including the curved spikes and a modified heat rod. The entire body has an internal frame with amazing flexibility.

• To commemorate the release of the "Gundam Unicorn" animated movie Bandai is releasing a newer, better, most glorious MG Unicorn called the Unicorn Gundam with Cage! 
  
•  This isn't just a new paint scheme; Bandai have totally redone this kit. New body color. Fully transformable. Head redesigned, including vulcans, to match the animated version. 
  
• Mobility of the hips is now 360 degrees & Knee joints have 150% more articulation! An additional antennae for destroy mode. 
  
• Customize cage included that can store extra parts while beam saber can be stored at the back of the base. Cage can be attached to the Action Base 1, all arms are movable. 1/100 figures: Audrey, Banagher, Cardeas, and Marida included! 
  
• Included weapons will be the Beam Magnum (with magazine), Hyper Bazooka, Shield, Beam Saber and select antennae.
  

• Total of 520pcs parts to create a robot . Can switch and transofrm between the massive G-Fortress flyer, the core base, core top and core fighter individual units, plus of course the actual ZZ Gundam itself. 
  
• Inner detail is not as good as some other MG releases, but given the nature of the ZZ, that's not surprising. 
  
• Fully posable hands are just part of the completely posable structure that lets you duplicate virtually any scene you can think of. 
  
• Weapon includeds two beam sabers, and a huge double cannon.
  

• From the popular game series Dynasty Warriors Gundam, the Hajime Katoki-designed Musha Gundam is realized as a Master Grade kit! 
• Utilizing the frame created for the Rx-78-2 Ver. OYW and clever parts separation, along with gimmicks for moving armor sections all add up one impressive Suit! 
  
• Various weapons included, all of which can be mounted on the Suit for quick storage- the sword at the hip, and the other weapons mounted on the backpack. 
  
• [Artillery Tanegashima] (rifle), [Tachi sun circle] (sword), comes equipped with a [spear diffuse round],
  
• [Halberd lightning round] is attached. To the left hip armor the sword, spear, artillery, (each equipped with halberd armed to
  
• It can be equipped with a backpack. )
  
• Accessories: Tanegashima Gun x1, Nichirinmaru Katana x1, Denkoumaru Naginata x1, Sankoumaru Jumonji Yari x1
  

• Total 307 parts, plus polycaps for joints, foil stickers for coloured parts, clear stickers for warnings, and the usual dry transfers for insignia and other markings, are included in the box. 
  
• Lots of weapons come along with it, double-bladed beam sabre, beam rifle, and shield, etc. Included in that parts count is a display stand, to allow you to pose your Freedom Gundam in flight. 
  
• A beautiful kit of a beautiful machine! 
  
• The markings allow you to designate your Freedom Gundam as a Zaft machine, or as Kira's personal machine.
  

• Bandai's well-received MG Exia from Gundam OO, is here in its Trans Am colors for this edition! 
  
• The popular machine comes sharply molded in color and incredibly flexible upon completion. 
  
• It can hold various dynamic action poses as well as signature stances seen in the show, and detail is spot-on with intricate mechanisms realized on its highly-articulated inner frame as we've come to expect from an MG release. 
• Clear green lenses are provided for its chest, and sides of its head, elbows, and knees, while all cord sections on the body utilizes hologram parts and clear parts so you can view its mechanisms underneath. 
• Two same-scale figures (molded in white) of Setsuna in standing and sitting poses are packed in the set along with foil stickers, dry transfer stickers, and MG Gundam Exia original marking stickers for detail. Batteries are required to light its' chest. Repair part is not included. 
  
• Weight:696g.

• All the fabulous detail that you'd expect in a kit of this quality and scale,including Bandai's beloved dry-transfer decals and less-beloved clear stickers. 
  
• A 1/20 scale unpainted figure of Cagalli, in flight suit, is included. Included a base stand, weapons such as 2 beam saber, beam gun, Shield, and pistol.
  

• More than just a color variation of the MG Strike Noir Gundam, this Master Grade kit of Lukas O'Donnell's Strike E comes with its I.W.S.P. (Integrated Weapons Striker Pack) unit and a plethora of weapons to boot! 
  
• From "Mobile Suit Gundam Seed Frame Astrays" manga series, Lukas's Strike E features highly detailed inner mechanisms and a super-articulated inner frame that allow you to set it in a variety of dynamic poses. 
  
• Weapons: 3 beam rifles, two beam rifle shorty, a combined shield with gatling gun, beam boomerang, two swords, and a Grand Slam sword. Stickers and dry transfers are included for markings. Stands included too!
  

• It is the brand new frame compatible for the non-transforming 4 out of the 5 Gundams 
  
• Derived from Wing Gundam Zero (Wing Gundam, Gundam Deathscythe, Gundam Heavyarms, Gundam Sandlock, & Shenron Gundam). 
  
• The snap mechanism of the wrist has been employed, to increase the poseability with weapons in hand, the forward and backwards movement range has been obtained. 
  
• Buster Shield: The beam effect part can be attached for the Claw Expanded mode. - Beam Scythe: The beam parts has been made with clear material, and can be detached. and equipped to the backpack. 
  
• Katoki Hajime has designed the markings. 
  
• Accessories: Beam Scythe, Buster Shield, Beam Parts for the Buster Shield Weight: 543g
  

• Improved design for placement of the caterpillar onto surface, allowing better posture control for the turrets. 
  
• Linked movement for the caterpillar, allowing flexible movement. 
  
• Caterpillar has the feature of resistance to the surface when rotating. 
  
• Dozato Carrier in front and behind the chassis can be deployed. 
  
• Stands included to show the docking sequence of Core Fighter to Guntank. 
  
• Suspension mechanism for the capital unit can be reproduced. Head has lighting effect. 
  
• LED unit included. Figures & accessories included: stand for the Core Fighter, cockpit figure (Hayato), fighter cockpit figure x2 (Ryu, regular), standing figure x 4 (Bright, Mirai, Hayato, Ryu). Total 16 runners, dry transfer decal & clear sticker included. Weight: 2kg
  

Rare Item Limited Edition like PG Pearl Mirror Ver! Building starts with Bandai's world-famous "inner frame" system, designed to allow the final product to move and pose as it would in the original series; then the armour, including the wings are attached to the frame. Weapons included are the built-in machine cannons (in the shoulders), two Beam Sabres, and the Twin Buster Rifles. A custom display stand (unassembled and unpainted) is included so you can pose the finished mecha in any number of mid-flight poses, while keeping it safe. A super-tiny scale figure (unpainted) of Hiiro Yui is included as well. Foil stickers, clear stickers, and Bandai's very sharp dry-transfer decals, are included for adding detail to the model once built.

Molded in the colors used in the classic "Mobile Suit Gundam" anime series, this version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor, and comes armed with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

• Bandai's Master Grade (MG) "RX-78-3" is meant to attract the mature modeler who remembers growing up with Gundam, but wouldn't think of building the primitive kits that were released when Gundam first was broadcast in 1980 (the original kit is still available, by the way. 700 yen). 
  
•  Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. Panels on the legs flip open to reveal internal mechanisms. The head has a panel, too. 
  
• Even the "Core Fighter" cockpit ship can be removed from its belly. Fine mesh parts cover the inside of the chest air intakes for added realism. Three types of hands are included -- open palm, fists, and posable (moving fingers) for gripping any of the several weapons that comes with the kit. All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  
• The RX-78-3 kit is identical to the RX-78-2 except that it is molded in blue and gray plastic, rather than the more "festive" colors of the original.
  

Over a decade since the first MG Zaku II kit release and several MG Zaku II variations later, this Zeon MS finally gets the "Ver. 2.0" treatment with a completely revamped inner frame construction that allows for even greater range of articulation and realistic movements--you can even pose it kneeling on one leg as seen in the show! Aside from the improved articulation, one of the major features of this kit is the incredible new molding process that has two different sections of the pipes molded together for easy slide assembly. Weapons include a Zaku machine gun, Zaku bazooka, heat hawk, and a pair of three-tube missile pods. Two types of blade antennas are thoughtfully included if you plan on building a Zaku II commander mass production type MS, plus two 1/100-scale pilot figures are also provided to man the MS. An incredible kit that's not to be missed!

• Bandai has finally answered the cries of Gundam fans worldwide for an MG kit of F91! This incredibly detailed and beautiful kit of Gundam F91 from the Mobile Suit Gundam F91 anime movie is stunningly reproduced in 1/100 scale Master Grade kit format with anime-accurate detailing and very flexible and fully-articulated body frame, allowing for a wide variety of poses. Also included in this kit is the top part of Lafressia acting as a base whereby you can connect a stand to it and the Gundam F91 to the stand to display it flying away from Lafressia or heading straight at it with all weapons drawn!
  

• The first 5 [G] Hebiamuzu appearance! 
  
• Flexible movement on it's posture, with BIG ARM weapon - Accessories: Shield, beam gatling, army k-nife, concealed arms (saber charged)
  

• Display to evolve! Package that comes with special parts! 
  
• Parts of the amount is detachable. The internal detail, including steps to reproduce. 
  
• Reproduction of the back of the head with the pipe power even visible from the gaps in the armor detail. 
  
• By integrating the LED unit (sold separately), the camera eye is capable of emitting light. - Cockpit hatch is openable. Cockpit can be seated figure. 
  
• Form, of a unique power to take over the pipe and shoulders of MS, while MS-dione series of federal troops Reproduction and spike armor. With movable shield, the saber can be mounted on the backside. 
  
• RMS-108 was developed campaign period ... Marasai Guripusu, the company Anaheim Electronics The successor of the Haizakku. In the first MS was adopted Gandariumu γ in armor material, MS second generation Machine is a masterpiece of the first period. 
  
• Accessories: beam rifle, beam saber x— 4, shield, wrist for having weapons (rifle, For saber), fist (left or right), palm of the new method (left or right), only joint action-based, Figure, figure cockpit, joint parts, secret parts
  

Bandai MG Gundam AGE-1 Titus – Master Grade Plastic Model Kit

Unleash raw power with the MG Gundam AGE-1 Titus, a Master Grade kit that brings the heavy-hitting, close-combat mobile suit from Mobile Suit Gundam AGE to life with stunning detail and dynamic articulation. Designed for builders who love bold silhouettes and impact-driven design, the Titus delivers a commanding presence on any display shelf.

Key Features

• Authentic Master Grade Detailing:
  Inner frame engineering allows for realistic mechanical structure, smooth posing, and impressive stability, even with its massive armor parts.

• Powerful, Muscular Proportions:
  True to its on-screen design, the Titus features robust limbs, broad chest armor, and oversized gauntlets that emphasize its melee-specialist personality.

• High Articulation for Dynamic Poses:
  Despite its bulk, the kit offers excellent mobility—pose it delivering heavy punches, high kicks, or mid-battle stances with ease.

• Signature Effect Parts:
  Comes with clear effect pieces for energy-infused attacks, letting you recreate iconic moves such as the Beam Lariat and Punch Impact.

• Color Separation & Sharp Mold Quality:
  Minimal painting required thanks to Bandai’s precise part color-coding, crisp panel lines, and clean plastic finish.

• Customizable Build Experience:
  Includes marking stickers, decals, and extra optional parts so builders can fine-tune details to their preference.

What’s in the Box

• MG 1/100 Gundam AGE-1 Titus runners

• Inner frame components

• Clear effect part sets

• Sticker & marking decal sheet

• Instruction manual (fully illustrated)

- Aile Strike Gundam MG with bazooka included scale 1/100, limited series stock, only 300 yen more to get this modal. - Top up with bazooka compare to original MG22242 Normal Aile Strike Gundam scale 1/100 (3800 yen). - Preview may be seen at this website address: http://mygundammodelkits.blogspot.com/2009/08/mg-gat-x105-aile-strike.html - The other remained the same, I have taken some photos from above website, thanks first.

• The evolved AGE-1 Spallow appears as an MG! 
  
• Designed with a complex internal frame.
  
• Includes several manipulator variants to enable various posing options! 
  
• Clear parts reproduced with clear-colored elements.
  
• Thorough details cover the Suit- even the internal cockpit hatch is detailed!
  
• Includes 1/100 figure of Flit Asuno.
  

• Blitz Gundam `The Raven` special warfare specification machines 2nd restart MG SEED. 
  
• 2nd restart mosquito MG celebrated its 10th anniversary from [Gundam SEED], the boarding of Nicole Blitz Gundam. By adopting a newly developed X-Frame, Pause and bold action May provide excellent installation. 
  
• In addition, the Grape and Neil Torikerosu an integrated weapons of offense and defense to reproduce the rich gimmick.  
  
• Torikerosu of the right arm. With beam saber, beam rifle, the Lancer Dart. 
  
• An action-based support as an option. The newly developed X frame, posing a certain force Can be reproduced. 
  
• As the original MG gimmick, to be the image for a `generator` Mirage Colloid stealth Deployment with the shoulder. 
  
• Grape Neil was equipped with the left hand side. In addition to the movable claw part, reproduced in a wire during injection,mounting portion weapon after the injection, MG original. 
  
• Gundam of five aircraft had been developed in Heliopolis ... (set version TV) GAT-X207 Blitz Gundam of a machine. Fuselage frame system was adopted X-200. Has a complete stealth performance,has been specialized for shock tactics. 
  
• Accessories: Shield (Torikerosu), Lancer Dart, beam saber × 2, Piercer lock (Grape Neil)
  

• Announced along with the release of the Mobile Suit Gundam SEED Destiny HD Remaster's Ootori Striker, this marks the fastest a Suit has been translated into an MG in Gundam history! 
• Following in the footsteps of the Aile Strike Gundam, the Strike Rogue is remastered (Ver.RM), giving the kit a more streamlined look and wide range of motion. Introduced in the HD Remaster of M.S.G.: SEED Destiny, the Ootori Striker Pack was designed by master mechanical designer Kunio Okawara. An Integrated Weapon Striker Pack, the Ootori is full of gimmicks
• Following the Aile Strike Gundam, MG Strike of Rouge becomes a Ver.RM.
• Ootori Striker Pack wings expand into a characteristic -  X -   shape, and tail can be folded. 
• Missile Launcher is mounted over the left shoulder.
• Dedicated Stand to help reenact arial action poses is included.
• IWSP EW454F Ootori Pack is separable from the Strike Rogue, and includes a transformation gimmick to shift into flight mode. 
• The MBF-02 Strike Rouge has been equipped with the IWSP (Integrated Weapon Strike Pack) Ootori Striker for maximum offensive output! Designed with an aerodynamic profile, advanced propulsion system and a full arsenal- Railgun, Beam Launcher, Missile Pod and Anti-Ship Sword. 
• Accessories: 57mm High-Energy Beam Rifle, Anti-Beam Shield, Armor Schneider x2, Beam Saber x2, Ootori Striker Pack, Dedicated Stand