Price Clear







Gundam Model Kits

Showing 271 - 300 of 453 products

img
SAVERM66.50

MG 1/100 RX-78NT1 Gundam Alex

  • The primary suit of Gundam 080: War in the Pocket, the NT-1, or 'Alex', this kit includes a beam rifle, dual beam sabers, the arm gatling, a shield, and can be modified with the Chobham armor system, giving the suit significant heft and protection. As with all Master Grades, this kit is molded in colors accurate to the version you know, and features details such as a 1/100 seated scale figure of the pilot and decals to customize your kit.
  • Item Size/Weight : 31 x 20 x 10 cm / 612g

RM113.40
img
SAVERM64.30

MG RX-178 Gundam MK-II (A.E.U.G)

RX-178 Gundam Mk-II (MG) A.E.U.G. Color

RM103.60
img
SAVERM64.30

MG 1/100 RX-178 Gundam Mk-II Titans

RX-178 Gundam Mk-II Titans

RM103.60
img
SAVERM68.30

MG 1/100 MS-06R-1A Zaku II (Black Tri-Star)

Here's another variation of Bandai's best-selling Master Grade Zaku kit. This version is based on the version originally seen in the "M.S.V." (Mobile Suit Variation) series. Besides the coloring, there are quite a few detail differences in the lower leg parts, weapons and markings of this Zaku. Weapons include the Giant Bazooka Prototype, standard Bazooka, "Heat Hawk" axe, and the sub-machine gun. This kit also comes with a figure of the pilot "Mush" (great name). Like all the kits in the MG series, the level of detail is superb, and virtually everything moves. The pipes running from the thighs to the calves, as well as around the sides of the head, are flexible springs covered with plastic tubes. The head has a panel that opens, and a small tab on the back of the head lets you position the Zaku's scanner eye. Three types of hands are included: open palm, fists, and posable (moving fingers). All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. Of course, the use of cement and paint will improve the appearance of a finished model.

RM111.60
img
SAVERM61.30

MG 1/100 RX-79(G) Gundam Ground Type (w/clear parts)

RX-79(G) Gundam Ground Type (MG) (w Clear Kit)

RM118.60
img
SAVERM59.90

MG 1/100 MSZ-006C1 Zeta Plus C1

  • MSZ-006C1 Zeta Plus C1
  • Equipped with trademark Beam Smart Gun.
  • Able to transform into Wave Rider mode, this kit uses ABS and screws to ensure proper joint connections.
  • Backpack equipped with propellent tank.
  • Rear wings completely adjustable for a variety of poses
  • Accessories: Beam Smart Gun, Hip Beam Cannon x2
  • Item Size/Weight : 33 x 24.2 x 12.5 cm / 800g

RM120.00
img
SAVERM68.30

MG 1/100 Gundam F91 (Harrison Madims Custom)

  • Blasting out of acclaimed manga Crossbone Gundam, rival pilot Harrison Martin’s customized Gundam F91 joins the Master Grade lineup! 
  • Features incredibly solid joints, thanks to a frame designed without poly caps.
  • Miniature Suit design supports a wide range of motion.
  • Water slide decals included to recreate the colors and detailed markings of the Suit.
  • VSBR features extending gimmick, elongating as the barrel is brought to bear.

RM111.60
img
SAVERM61.30

MG 1/100 Z'gok (w/clear parts)

A target model kit of the MG clear parts campaign to celebrate Gunpla 30th anniversary! Comes with 1 clear body parts runner. You can enjoy the inner structure through the clear body parts.

RM118.60
img
SAVERM56.90

MG 1/100 RX-77-2 Guncannon

A highly detailed 1/100 model of the Gun cannon from the original Mobile Suit Gundam. Features internal skeleton in legs that outer armor can detach from, showcasing the mechanical features of the design. Includes alternate missile pod attachment to replace the cannons as well as working core fighter that can transform. Includes faction markings in the form of dry transfers and stickers.

RM123.00
img
SAVERM122.00

MG 1/100 Gundam Deathscythe-Hell EW Ver.

  • Following EW ver. Death Scythe rated No.01 for item of most interest at the Tokyo Hobby Show MG booth, the Death Scythe Hell takes off! 
  • Uses the XXX-G Frame developed during the animation!
  • Marking work is designed by Hajime Katoki.
  • Increased freedom of movement when set on Action Base, by the placement of joint at the wing connection part.
  • New gimmick and mechanism equipped to the Active Cloak. By pulling from the base part of the wing, the internal machinery will appear. 
  • Able to reproduce the flapping from the animation naturally. 
  • The closed state of the Active Cloak can also be reproduced with a natural form. 
  • Accessories: Beam Scissors, Active Cloak Technology & Combat Characteristics The Gundam Deathscythe was the "masterpiece" of Professor G. 

RM171.50
img
SAVERM91.20

MG 1/100 MS-09 Dom

MS-09 Dom (MG)

RM148.70
img
SAVERM89.90

MG MS-06R-1A Zaku II Ver.2.0 (Shin Matsunaga Custom)

  • Mechanism of Zion threat. 
  • The development story connected from mass production Zac to Gelgg is reproduced with the MG kit.
  • Zac MS-06R of "Singh Matsnaga" specification of high mobile type Zac is made a kit by using the basic structure of Zac Ver.2.0 of the inner frame enhancement reproduction. The detail shape such as the leg, the shoulder, the shoulder armors, and forearms changes from MS-06R. 
  • The Zac machine-gun, the Zac bazooka, the cartridge magazine in addition to the heat fork, and parts for the experimental bazooka modification are attached.

RM180.00
img
SAVERM99.90

MG 1/100 MS-06S Zaku II (Johnny Ridden Custom) Ver.2.0

  • Designed on the basic inner structure of the Zaku II Ver. 2.0, legendary Zeon ace pilot Johnny Ridden's custom Zaku II is added to the Zeon Master Grade lineup! 
  • Features redesigned thruster housing and shoulder armor inspired by the Zaku II 06R.
  • -  Monoeye -   camera movement gimmick allows for eye position to be changed.
  • Separable spike elements set this kit apart from your standard Zaku. 
  • Thanks to the updated power pipe assembly system, the once tedious process has been streamlined by using pre-positioned runners. 
  • Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, Giant Bazooka x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM170.00
img
SAVERM161.40

MG 1/100 GN-0000 Gundam 00 Raiser oo Raiser

  • MG Raiser, go!
  • Internal frame structure based partly off original Gundam 00 and partly off the Raiser.
  • Utilize the Gunpla LEDs to showcase GN particle emissions in the head, GN Drives, and particle storage tanks. 
  • This product has five LED-enabled locations, and includes a single LED unit. Four additional Gunpla LED units required for full effect..
  • Cockpit block features opening hatch. 
  • Raiser binder is equipped with opening gimmick.
  • Thanks to new molds, weapons such as Raiser Sword can be recreated.
  • Accessories: GN Sword II x2, GN Shield, GN Sword III, GN Beam Saber,
  • 1/100 pilot figure (Standing, Sitting)

RM227.50
img
SAVERM146.90

MG 1/100 00 Gundam Seven Sword/G

  • From Mobile Suit Gundam 00V: the variant of the Gundam 00- the 00 Gundam Seven Sword!
  • Includes an arsenal of weaponry. 
  • Both the Suit and weapons are packed with gimmicks!
  • Includes new kneecap parts unique to the Seven Sword!
  • Includes all Seven Swords and the GN Sword II Blaster! 
  • GN effect parts are reproduced using clear parts, and fixed joint are installed for easy weapon manipulation. GN Sword II Blaster features an expandable hilt, and can be mounted onto the binder.
  • Both Shield and Sword mode mode of GN Buster Sword II can be reproduced!
  • LED unit (sold separately) can be installed for a more accurate look!
  • Also includes GN Sword II Long and Short (both featuring gimmicks), and GN Katars can be connected to shift to shield form!

RM206.50
img
SAVERM99.90

MG 1/100 Master Gundam (Hyper Mode)

  • Hyper Mode Master Gundam (MG)

RM200.00
img
SAVERM96.10

MG 1/100 RX-78-2 Gundam (w/clear parts)

Item Size/Weight : 31 x 20 x 14 cm / 717g

RM155.80
img
SAVERM114.50

MG 1/100 Gundam Age-2 Normal

The 2nd Gundam featured in Mobile Suit Gundam Age, the Age-2 Normal, features a completely transformable design with no need for part swapping and possesses incredible surface detail. Also, this kit features great articulation and a unique build design which allows the AGE-2 to transform into it's Strider form without any parts swapping! Marking stickers and extra hand parts are also provided.MG only gimmicks on this release include; retractable landing gear integrated into the armor, an opening cockpit in both battle and robot form and a set of double sided beam sabers. 

Runner x17, foil sticker x1, marking sticker x1, gundam decal x1, instruction manual x1 included.

RM161.00
img
SAVERM91.20

MG 1/100 Strike Rouge Gundam (Clear Color Ver.)

Here's another cool "Clear Color" release from Bandai! Strike Rouge follows the same design as its previous Master Grade release with the exception of its new, crisp, clear color scheme. Its parts appear almost crystal-like, and, though they are colored, they are transparent. This version of Infinite Justice is just made to shine under the proper lighting! Like all of the Bandai Master Grade model kits, this Strike Rouge Clear Color Ver. is completely snap-together with parts that are molded in color so no paint or glue is needed to complete it. The directions for the model do feature Japanese text, but they also have English lettered and numbered pictures that are very easy-to-follow. This Strike Rouge Clear Color Ver. Master Grade Model Kit is brand new, and all its parts are factory sealed by Bandai Japan.


More Info from Wikipedia
The Strike Rouge is a mobile suit using spare parts from the GAT-X105 Strike that was in Mobile Suit Gundam SEED and its sequel Mobile Suit Gundam SEED Destiny. Its primary pilot is the Princess of Orb Cagalli Yula Athha. The word Rouge is the French word for the color red.

After the first Strike was destroyed outside the territory of the Orb Union, a different Strike model was built, using spare parts of the originial suit. This Strike variant, called the Strike Rouge, was built on the Kusanagi during the last days of the first Bloody Valentine War and piloted by Cagalli Yula Athha, who used the suit for a short time during the Second Battle of Jachin Due on 26 September, CE 71. Among her actions was the rescue of Athrun Zala, who detonated his suit inside ZAFT's superweapon GENESIS to prevent it from firing on Earth.
The Strike Rouge remained operational until mid CE 74, and was used as Cagalli's personal mobile suit after she and the crew of the Archangel left Orb. She launched in her suit several times to convince the Orb forces not to fight against the ZAFT ship Minerva, although with little success. When the Archangel returned to Orb, after modifying it to his specifications (by configuring the suit's Variable Phase Shift armor to reflect the original Strike's colors) Kira Yamato launched into space with the Strike Rouge (equipped with a booster) and used it briefly to protect the Eternal. The Strike Rouge however was no match against ZAFT's newer and more powerful mobile suits and was heavily damaged in this battle. With both of its pilots equipped with newer and more powerful mobile suits, the Strike Rouge did not see battle again and it remains questionable if it was ever repaired or simply decommissioned.

Weapons wise, the Strike Rouge features the exact same weaponry as the original GAT-X105 Strike. This includes the two head-mounted CIWS guns, two combat knifes and a beam rifle.
Like the Strike, the Strike Rouge was always equipped with a Striker Pack. The most commonly used was the Aile Striker, which added additional two beam sabers to the armament. Besides the Aile Striker, the suit also was known to be equipped with the Integrated Weapons Striker Pack, or IWSP. This pack combined the best aspects of the Aile, Launcher and Sword packs from the original Strike. It included a large number of additional weaponry to the suit's armament, including railguns, cannons, anti-ship swords and a combined shield, mounting a gatling gun and a beam boomerang.

Though never stated in the series, it is obvious that the Aile Striker Pack for the Strike Rouge was upgraded by the Orb Union between the end of the First Bloody Valentine War and the Second Bloody Valentine War. The original Aile Striker Pack did not have full flight capability in the atmosphere, however in Gundam SEED Destiny the Aile Strike Rouge is shown on several occasions flying in Earth's atmosphere along side the ZGMF-X10A Freedom.

RM148.70
img
SAVERM114.50

MG 1/100 Gundam Age-2 Dark Hound

  • Fully transformable AGE Master Grade: The Dark Hound!
  • Complete transformation to flight form!
  • In addition to each weapon, a variety of manipulator parts are included.
  • Using an Action Base (sold separately) enables easy and accurate aerial posing.
  • Piloted by Bishidian Pirate Captain Ash, the Dark Hound is a repaired and renovated Gundam AGE-2 Normal.
  • Accessories: DODS Lancer, Anchor Shot x2, Beam Saber x2, Pilot Figure (Sitting, 

RM161.00
img
SAVERM239.90

MG 1/100 Sinanju Ver.Ka (Titanium Finish)

- Includes: 

Beam Rifle, Beam Saber x2
Grenade Launcher, Shield, Beam Axe x2
Cockpit figure, Standing figure, Attachment for Action Base.

RM480.00
img
SAVERM113.90

MG 1/100 RX-93 Nu Gundam

The RX-93 ν Gundam Double Fin Funnel Type (Nu Gundam Double Fin Funnel Type) is a Mobile Suit piloted by the main character, Amuro Ray. It first appeared in Char's Counterattack Mobile Suit Variations.


Wikipedia information
In response to the rise of Char Aznable's second Neo Zeon movement in the early UC 0090s, the Earth Federation Forces create a special task force called Londo Bell to investigate and stop the new rebellion. One of Londo Bell's mobile suit pilots is famed One Year War ace Amuro Ray, whose Newtype abilities are essential to stopping Char's forces. Londo Bell commissions Anaheim Electronics to build a new Gundam-type mobile suit for Amuro's use, incorporating the latest in psychic communication technology. Anaheim's result is the RX-93 v Gundam (v being the Greek symbol "nu"). The v Gundam's basic design is created by Amuro himself, but construction and final modifications are supervised by Anaheim engineer October. October incorporates the latest piece of psychic communication technology - supposedly leaked to Anaheim by Char's Neo Zeon - called the "psycoframe." Composed of microscopic-sized psycommu receptor chips, October incorporates the new psycoframe technology into the v Gundam's cockpit frame, not only reducing its total weight but giving the pilot an edge in being able to more easily read an enemy's thoughts and movements.

However, Char's forces begin to move quickly, and the final rollout date for the v Gundam is moved up. Amuro takes possession of the v Gundam and returns to the Londo Bell task force to prepare his new mobile suit for the coming fight with Char. 

Unfortunately, the psycoframe advantage also has its drawbacks. October warns Amuro that the psycoframe can create "powerful unknown phenomenae," and this proves true when Amuro attempts to use the v Gundam to single-handedly stop half of the asteroid base Axis from falling on Earth. When other mobile suit pilots join in the effort to push the giant rock from its decaying orbit, the concentration of so many minds on a single task causes the v Gundam's psycoframe cockpit to overload, resulting in the mobile suit's destruction... and Earth's salvation as Axis is pushed away by the overwhelming psychic force. Psycoframe development continues after the war, and in UC 0096 the Vist Foundation rolls out the RX-0 Unicorn Gundam, a mobile suit that incorporates the psycoframe throughout its entire body.

Weapons
  • Fin funnel - Along with the psycoframe, the v Gundam is also equipped with six "fin funnels," a new evolution in Newtype-controlled remote weaponry. Although they are technically "bits" and not "funnels" (since the fin funnels have their own onboard reactors for power), they are far more advanced than normal bits or funnels in that, in addition to serving as remote beam weapons, they can also be used in geometric formations to create a "beam barrier", offering a target 360 degrees of protection against most weapons fire. By combining these advanced remote weapons with a Newtype pilot's psycoframe-enhanced abilities, the v Gundam proves to be an unstoppable foe for the common Neo Zeon pilot.

RM186.00
img
SAVERM180.00

MG 1/100 RX-0 Unicorn Gundam 02 Banshee Titanium Finish Ver.

  • Black Unicorn Gundam Banshee, reincarnated as a Master Grade kit! 
  • Includes transformation mechanism into Unicorn mode! 
  • Appearing in the final scene of Mobile Suit Gundam: Unicorn episode 4, the Unicorn Banshee is fully reproduced here, including the full transformation system. 
  • Transformation from destroy mode to Unicorn mode is completely replicated. Moreover, the Psychoframe has been recreated in a UV sensitive material that illuminates under black light. 
  • Armed Armor VN features deployment gimmick.
  • Beam tonfa gimmick included. 
  • Armed Armor BS includes barrell details and deployment gimmick
  • RX-0 Unicorn Gundam 02: Banshee- revealed at the end of episode four, this mysterious Suit is capable of shifting into Destroy mode, and is massively powerful- but is it friend or foe?
  • Accessories : Armed Armor BS, Armed Armor VN, Beam Saber x4 (Beam Effect x2), Action Base Joint, Pilot Figure (Sitting, Standing), V Fin (Transformable), V Fin (Destroy Mode, Unicorn Mode)

RM480.00
img
SAVERM138.90

MG 1/100 RGZ-95C ReZEL Type-C (Defenser a+b Unit/General Revil)

  • MG 1/100 ReZEL TYPE-C (DEFENSER a+b UNIT/GENERAL REVIL CUSTOM) 
  • ReZel for General Revil from ""Mobile Suit Gundam UC episode 6"". 
  • The missile-equipped a-unit and the launcher-equipped b-unit are exchangeable. 
  • Its distinctive orange and grey colors are expressed in injection colors. 
  • runnerx26, foil sticker x1, dry decal x1, tetron sticker x1, instruction manual x1

RM250.00
img
SAVERM74.90

MG 1/100 RGM-96X Jesta

  • Master Grade kit of the Londo Bell Corps' high-performance MS: the Jesta! 
  • Deployed by the elite Londo Bell Corps, The Jesta is replicated here with gimmicks such as its moving shield arm. In addition, this kit incorporate proportions and features once thought to be unique to top-level kits, now made standard for the Master Grade series.
  • Movable shield arm can hold the shield against the backpack or in a usable position! 
  • Grenades mounted at the waist, and specialized Beam Rifle and Beam Saber are included 
  • Emotion manipulators adopted from the higher-level v Gundam Ver.Ka, along with the weapon-locking system!
  • With a limited operating time in Destroy Mode, the Unicorn Gundam relies on the elite RGM-96X Jesta to take out it's non-Newtype enemies! 
  • Accessories: Beam Rifle, Shield, Beam Saber, Pilot Figure (Standing, Sitting), Joint for Action Base 1

RM165.00
img
SAVERM119.20

MG 1/100 Gundam Age-2 Double Bullet

  • Appearing in Gundam AGE, the Age-2 Double Bullet has evolved the Age-2 designs even further! 
  • The Double Bullet, an evolution of the Gundam AGE-2 appears as an the MG! Designed with a complete inner frame and all the unique characteristics of Master Grade AGE kits.
  • Transformation mechanism is also reproduced, along with all the details you expect from a modern Master Grade kit. 
  • Twin DODS Cannons included with blade and beam parts in order to reproduce iconic scenes from Gundam AGE!
  • Includes calf missile deployment gimmick.
  • A truly gimmick-based MG, the cannon's position can be changed to be fired while being held or not, and can be separate from the shoulder mounts to be used like standard DODS Rifles. 
  • Transformation gimmick included to shift into flight mode! 
  • Also includes scale Asemu figures.
  • Accessories: Twin DODS Cannon x2, Calf Missile x2, Beam Saber x2,
  • Pilot Figure (Sitting, Standing)

RM132.70
img
SAVERM269.10

MG 1/100 MSN-02 Perfect Zeong

  • The Master Grade kit of the regular Zeong (sans legs) was big enough...in this scale, the Perfect Zeong is just about the size of a typical Perfect Grade kit, standing a massive 36 cm tall. Take note of the weight and dimensions and estimate accordingly. Over 350 parts plus polycaps for joints, stickers for detail, screws for stability and wire for the cables that allow the Zeong's hands to shoot out and snap back. Make room on your display shelf!
  • Total of 480pcs parts to be assembly, also with stickers, screws for stability and wire for the cables that allow the Zeong's hands to shoot out and snap back. Total height is 38cm. pls see size comparison from Dalong.net and it is one of the largest Gundam model kit!

RM330.80
img
SAVERM97.10

MG 1/100 MS-06J Zaku II Ver 2.0

  • A realistic kit for the famed earthbound Zaku II, the Ver. 2.0 is the advanced heir to the older Master Grade line, and introduces a new standard for MG Zaku II! 
  • With a new frame for a new line, this redesigned kit boasts a new 06 Zaku II frame that will be seen in new Zaku kits.
  • Inner frame designed to accommodate a wide variety of Zaku designs.
  • Power pipe systems redesigned for easy building, and frame features improved twist joints, giving the kit much more action than the previous Zaku II MG.
  • ‘Monoeye’ camera movement gimmick allows for eye position to be changed.
  • Inner frame features a shell for the massive shoulder armor.
  • Outer shoulder armor is recreated with detachable spikes.
  • Redesigned ankle link boasts improved performance. 
  • New mobile dual action mechanism improves leg joint performance .
  • Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM136.50
Get ready to upgrade your collection with the exceptional Master Grade Gundam models. These high-quality Gunpla models offer the ultimate building experience, showcasing intricate details and accurate representations of the iconic Mobile Suits from the Gundam universe. In this blog post, we will take you through our top picks for the List of Master Grade Gundam. Whether you are a seasoned builder or just starting out, our Collection of Master Grade Gundam models has something for everyone.

Discover the best Master Grade Gundam available at www.gundam.my and get a glimpse of what sets them apart from the rest. From the intricate inner mechanics to the stunning outer design, these Overview of Master Grade Gundam figures will leave you in awe. Moreover, gundam.my guide you through the best Guide to the Best Master Grade Gundam to help you find the perfect model for your collection.

In addition, Master Grade (MG) is a line of Gunpla kits based on Mobile Suit Gundam anime series. It was first produced by Bandai in 1995 as part of the Gundam 15th Anniversary project.

Master Grade gundam are 1/100 scale kits designed and made to higher standards than High Grade (HG) kits but fall under Perfect Grade (PG) kits.

In 2002, Bandai started releasing a Master Grade line under the label of Ver. Ka (Version Katoki), in honor with veteran designer Hajime Katori.

Showing 271 - 300 of 453 products