• Astray has been MG-ed for the very first time! Appearing in [VS Astray], the Astray Blue Frame Second Revise has been released in MG!
• The outer layer slides as the arms parts and the legs parts move accordingly. The shoulder parts and stomach parts gained its large mobility due to the pulling mechanism used.
• Able to improve the variety of poses using the Action Base (sold separately)
• Tactical Arms II (sold separately) can be placed on the base included to take its fighting stance.
• Complete Transformation of the back pack form into the Large Sword/ Gatling Arm.
• The transformation of the Tactical Arms to the Flight Form and Blade Form has been completely reproduced.
• The Gatling Gun and the two blades can be separated. The grip of the sword expands, and can be attached to the elbow side. (Beam also reproduced.)
• Comes with the following: Tactical Arms II (with exclusive action base), Amour Schneider x2
• Copyright Sotsu Agency / Sunrize Weight : 849g

• Bandai has finally answered the cries of Gundam fans worldwide for an MG kit of F91! 
  
• Format with anime-accurate detailing and very flexible and fully-articulated body frame, allowing for a wide variety of poses. 
  
• Included top part of Lafressia acting as a base whereby you can connect a stand to it and the Gundam F91 to the stand to display it flying away from Lafressia or heading straight at it with all weapons drawn!
  

The only Zeon MG from 08th MS Team, the Gouf Custom ditches the Gouf's close-combat weaponry for more ranged weapons. However, it retains all the elements of the Gouf including the curved spikes and a modified heat rod. The entire body has an internal frame with amazing flexibility.

• Following the Suit's original designs, the shoulder cape and large range of motion allow this kit to fit into accurate poses and feature dynamic action! 
  
• Huge weapons split into individual elements!
• Accessories: Buster Gun x1, Scissor Anchor Cable x2, Scissor Anchor Chain x2, Beam Saber x2, Heat Dagger x2, Beam Shield x1, Brand Marker x2, Beam Zanber x1, Hi-Murasama Blaster x1, Peacock Smasher x1
  

• From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  
•  Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  
•  Equipped with a movable core fighter! 
  
•  Includes Stand to display the Core Fighter.
  
•  Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer
  

• From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  
• Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  
• Equipped with a movable core fighter! 
  
• Includes Stand to display the Core Fighter.
  
• Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer
  

Beautiful Master Grade version of the God Gundam, in 'Hyper Mode'. The base is Bandai's super flexible, super poseable 'Action Frame', put together with some snap-fit pieces, some screws, bolts, polycaps for joints, and some wire (Master Grade kits are much more complex than regular plastic kits) over which the armor is layered. The finished product can take on infinite 'realistic' poses as seen in the anime. Parts are gold-plated for that Hyper Mode gleam! Some stickers for detail are included, as well as a plastic 'jewel' for the Hyper Mode unit. Also included is a translucent orange plastic figure of Domon Kyasshu!

• Zeta Gundam was broadcast on Japanese TV during '84/85, following up the original series with a whole new set of characters and machines. 
  
• Not surprisingly, the robot of the same name was the main piece of hardware in the show. 
  
• This new show also introduced the "transformation" concept to Gundam, and the Zeta does an impressive one, switching from robot mode to "Wave Rider" mode in the wink of an eye. 
  
• Perhaps more impressive is the fact the this Master Grade kit can also make this transformation without a single piece having to be removed or replaced on it (not counting the shield/nose piece, but that's true to the show). 
  
• This version of the 1/100 MG Zeta Gundam is the test version as it appeared at Anaheim Electronics during the initial phases of the project. 
  
• Eight full-size runners with hundreds of multi-colored parts make this kit a serious assembly project, but it goes together very smoothly. 
  
• Besides the transformation capability, the kit includes all kinds of other goodies. As usual, everything moves. Even those antenna on its forehead fold up. 
  
• Three sets of hands are included -- fists, open palm, and posable. Also includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  All of Bandai's MG (as well as HG) kits are completely snap-together, and parts are molded in color, so no painting is necessary. 
  
• Of course, the use of cement and paints will improve the appearance of a finished model. Many of the surface markings are printed right onto the plastic parts to begin with, but the kit includes replacement transfers for those people who wish to paint their work. 
  
• Transformation capability. 
  
• Everything moves, even those antenna on its forehead fold up. Three sets of hands are included -- fists, open palm, and posable. 
  
• Weapons includes the usual "beam saber" sword, dual Vulcan cannon, beam rifle and shield. 
  
•  Weight: 612g
  

• Total parts count: 703pcs (highest in all MG models) More impressive than all the armor on this mobile suit is the weapons. In addition to the Double Beam Cannon, you get that massive Hyper Mega Cannon. Be forewarned! 
  
• Getting him to pose with that monster on his shoulder is a bit of a challenge, but it can be done. 
  
•  Hours of assembly fun. 
  
• Comes with markings for three different machines (04, 05 and 06). 
  
• Weight: 1402g
  

To commemorate the 20th anniversary of Gundam, Bandai has released the Master Grade Zeta Gundam kit in an all metal-plated version. Quite an interesting effect. Includes figure of Camille Bidan.

• From the popular game series Dynasty Warriors Gundam, the Hajime Katoki-designed Musha Gundam is realized as a Master Grade kit! 
• Utilizing the frame created for the Rx-78-2 Ver. OYW and clever parts separation, along with gimmicks for moving armor sections all add up one impressive Suit! 
  
• Various weapons included, all of which can be mounted on the Suit for quick storage- the sword at the hip, and the other weapons mounted on the backpack. 
  
• [Artillery Tanegashima] (rifle), [Tachi sun circle] (sword), comes equipped with a [spear diffuse round],
  
• [Halberd lightning round] is attached. To the left hip armor the sword, spear, artillery, (each equipped with halberd armed to
  
• It can be equipped with a backpack. )
  
• Accessories: Tanegashima Gun x1, Nichirinmaru Katana x1, Denkoumaru Naginata x1, Sankoumaru Jumonji Yari x1
  

• Total 307 parts, plus polycaps for joints, foil stickers for coloured parts, clear stickers for warnings, and the usual dry transfers for insignia and other markings, are included in the box. 
  
• Lots of weapons come along with it, double-bladed beam sabre, beam rifle, and shield, etc. Included in that parts count is a display stand, to allow you to pose your Freedom Gundam in flight. 
  
• A beautiful kit of a beautiful machine! 
  
• The markings allow you to designate your Freedom Gundam as a Zaft machine, or as Kira's personal machine.
  

• Bandai's well-received MG Exia from Gundam OO, is here in its Trans Am colors for this edition! 
  
• The popular machine comes sharply molded in color and incredibly flexible upon completion. 
  
• It can hold various dynamic action poses as well as signature stances seen in the show, and detail is spot-on with intricate mechanisms realized on its highly-articulated inner frame as we've come to expect from an MG release. 
• Clear green lenses are provided for its chest, and sides of its head, elbows, and knees, while all cord sections on the body utilizes hologram parts and clear parts so you can view its mechanisms underneath. 
• Two same-scale figures (molded in white) of Setsuna in standing and sitting poses are packed in the set along with foil stickers, dry transfer stickers, and MG Gundam Exia original marking stickers for detail. Batteries are required to light its' chest. Repair part is not included. 
  
• Weight:696g.

• All the fabulous detail that you'd expect in a kit of this quality and scale,including Bandai's beloved dry-transfer decals and less-beloved clear stickers. 
  
• A 1/20 scale unpainted figure of Cagalli, in flight suit, is included. Included a base stand, weapons such as 2 beam saber, beam gun, Shield, and pistol.
  

• More than just a color variation of the MG Strike Noir Gundam, this Master Grade kit of Lukas O'Donnell's Strike E comes with its I.W.S.P. (Integrated Weapons Striker Pack) unit and a plethora of weapons to boot! 
  
• From "Mobile Suit Gundam Seed Frame Astrays" manga series, Lukas's Strike E features highly detailed inner mechanisms and a super-articulated inner frame that allow you to set it in a variety of dynamic poses. 
  
• Weapons: 3 beam rifles, two beam rifle shorty, a combined shield with gatling gun, beam boomerang, two swords, and a Grand Slam sword. Stickers and dry transfers are included for markings. Stands included too!
  

• The stylish form rebuilt by Katoki had been reproduced. 
  
• Equipped with the wing area adjustment gimmick, with wide posing range. 
  
• Able to transform into the Bird mode. With the wings at center, the front/back balance had been pursued for a greater flight mode. 
  
• The action gimmick for the weapons has been reproduced too. The barrel can be taken down, and the saber will pop out. 
  
• Equipped with a locking mechanism during transformation. The rifle can be locked to increase stability. By cranking the side armor, the base of the arm shaft is locked, also locking the mobility of the waist during MS mode. This stabilizes the Bird mode. 
• - Leg transformation mechanism equipped. Linked with the knee joint, the ankle will move to it's storage position. (The ankle will be stored in the shin, reducing the total length) 
• - The cockpit has been reproduced, with the figurine included. The figurine of Heero has been reproduced at 1/100 scale with immense detail. The cockpit hatch can be liberated to open, to reveal Heero in his shirt. - Weapon/Accessories: Shield, Beam Saber, Buster Rifle, Heero Figurine Weight :591g
  

• Improved design for placement of the caterpillar onto surface, allowing better posture control for the turrets. 
  
• Linked movement for the caterpillar, allowing flexible movement. 
  
• Caterpillar has the feature of resistance to the surface when rotating. 
  
• Dozato Carrier in front and behind the chassis can be deployed. 
  
• Stands included to show the docking sequence of Core Fighter to Guntank. 
  
• Suspension mechanism for the capital unit can be reproduced. Head has lighting effect. 
  
• LED unit included. Figures & accessories included: stand for the Core Fighter, cockpit figure (Hayato), fighter cockpit figure x2 (Ryu, regular), standing figure x 4 (Bright, Mirai, Hayato, Ryu). Total 16 runners, dry transfer decal & clear sticker included. Weight: 2kg
  

Gundam MKII model unit. Coupled with parts for the G-Defender which lets you create an MG Super Gundam. Standing height almost 30cm! Almost all of the fins and hatches on the G-Defender move to allow various configurations, reveal missile bays, etc. Technical and historical notes Early during the Gryps Conflict, the Anti-Earth Union Group's newly-captured RX-178 Gundam Mark II mobile suit was soon outclassed by new variable-form mobile suits/mobile armor being developed by their Titans enemies. Although fairly impressive for its innovative new "movable frame" construction, the Gundam Mark II soon found itself left behind in terms of mobility, armor and firepower. To compensate for these shortcomings, the Anaheim Electronics Company developed a new weapon to enhance the Mark II's performance. Called the FXA-05D G-Defenser, this new space fighter-like unit was capable of docking with the Gundam Mark II. During cruise/flight mode, this form was called the G-Flyer. However, the Mark II could assume full control of the G-Defenser's weapons as a mobile suit, becoming what was commonly called the RX-178+FXA-05D Super Gundam. The Super Gundam sported an approximately 20% increase in speed/acceleration over the stand-alone Mark II, as well as provided the benefit of additional (and more effective) gundarium armor and the powerful long rifle and missile pods. These improvements allowed the Super Gundam to operate on a more equal footing with the high-performance variable mobile suits being fielded by the Titans at the time. Technical source:http://www.mahq.net Simple Instruction included in a box. Weight: 806g

• From the hilarious and utterly bizarre alternate-universe Gundam series G Gundam, comes the Neo Germany entry in the fray, Gundam Spiegel. 
  
• 2nd model from the G Gundam series! 
  
• Also included are unpainted 1/20 figures of Schwarz Bruder and Rain Mikamura. Simple instruction included in a box. 
• Weight:1000g
  

• Pull-out hip and shoulder joints.
  
• All joints are movable fingers 10.
  
• Mono Movable nozzle head and ears.
  
• Refer to the left and right arm stand.
  
• Detachable head.
  

Made up of 11 runners of injection plastic and one runner of polycaps, with two small sets of decals for detail, this is easily one of the most complex of the Gundam versions. Lots of poseability thanks to polycaps at the joints. It does not feature the inner-frame system. Weapons included Beam Gun, 2 Laser Swords, Shield and Giant Beam Sniper. Simple instruction included in a box. Weight: 1000g

• Nice, brightly-green mass-production mobile suit from Zeta Gundam series. 
  
• Builds up nicely with an articulated inner frame over which you lay the armour bits. 
  
• Weapons are included as well; a beam rifle, two beam sabres, and a shield. 
  
• Dry transfer decals and clear Gundam stickers are included for markings. 
  
• Simple instruction included in a box. 
  
• Weight: 529g
  

There are 16 runners of parts here. Those shoulder "binders" are particularly interesting, especially the way the outer nozzle pivots downward. The "atomic bazooka" can be mounted in the hand in firing position, or it breaks down into two pieces, the barrel mounting in the inside of the shield (see photo), with the remainder mounting on the GP02's back. Comes with the usual stickers, inner-mechanism detail, multiple sets of hands, beam saber, rifle. Simple instruction included in a box. 

• Color molded body is reproduced in Real Type Color! Seal comes with special markings!
  

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!