• This new kit of the God Gundam features the new "Fighting Action" frame system. This all new design is made from ABS plastic and screws together, so it's free from sticky work - glue. 
  
• No polycaps! This Gundam kits is extremely strong and holds positions without the sagging that earlier poly-cap designs suffered from. 
  
• The back and chest pannels also can be open to duplicate the "Hyper-Mode" from the anime series. 
  
• Flexible in posting. All parts are pre-colored nicely and snap together with instruction included. 
  
• Dry transfers for markings. 
  
• Domon Kasshu was included a figure of the pilot. 
  
• Two sets of hands - one standard and one in clear yellow to replicate the look of the energy ball attack.
  

• Up to reproduce the features of the G Gundam series action poses with the new action frame.
  
• By entering the body of the chest unit to reproduce the arms folded pose.
  
• Master Cross (weapons), with figures of Master Asia.
  

• Pull-out hip and shoulder joints.
  
• All joints are movable fingers 10.
  
• Mono Movable nozzle head and ears.
  
• Refer to the left and right arm stand.
  
• Detachable head.
  

• Mobile Suit Gundam SEED's Freedom Gundam sets a new high mark in MG's evolution with its 2.0 version! 
• Both frame and armor are completely rescupted with revised proportions! 
• It's also packed with extra details from the SEED Ver. RM series. With extending elbows, sliding thigh armor, and a flexible waist, it’s perfectly suited to strike heroic poses! 
• Its wing and beam cannons flex for full burst mode, as well. 
• A full arsenal includes linkable beam sabers, and other accessories include a stand and a variety of manipulator parts.

• MG RGM-79(G) GM Ground Type
  

• Release quickly following the release Endless Waltz: The Glory of Losers- the MG Wing Gundam! 
  
• Tons of new features! 
  
• Molded in updated colors as shown in EW! 
  
• New package art creates a unified look for the MG Endless Waltz series! 
  
• MG EW series produce a sense of a new package!
  
• Marking decals designed by Hajime Katoki.
  
• Parts expand for performance-based dynamic posing! 
  
• Accessories: Twin Buster Rifle, Shield, Beam Saber, E-Pac x2
  

• Built-in Phalanx cannons stored in the head give this Suit a strong defense weapon.
  
• Features huge rear skirt and knee armor, as well as upgraded thrusters.
  
• Can convert from Quattro Custom to standard Rick Dias! 
  

• Weapon Accessories: rifle, saber, shield, beam shield, Grapple Stinger. 
  
• Effects included: Saber, Blade Beam (leg, wing), beam boomerang, beam Shielding.
  
• Figures included: Athrun Zala of 1 / 100 size (for cockpit, standing postures).
  
• Action base is not included

• Accessories: Rifle only, dedicated shield, beam saber x? 2, Beam A-xe x? 2,bazooka, figure (standing pose), Cockpit figure, Joint for Action Base 1
  
• The MSN-06S Sinanju (aka Sinanju, MSN-06S) is a mobile suit featured in Mobile Suit Gundam Unicorn. It is the modified version of Anaheim Electronics's MSN-06S Sinanju Stein. It is piloted by Full Frontal.
• Originally the MSN-06S Sinanju Stein developed by Anaheim Electronics as part of the Earth Federation's "UC Project", its movable frame is partly made from psycoframe materials. All of the Gundam-like features (except for the vulcan) in the Sinanju Stein have been replaced with a Zeonic-like design and weaponry, making it reminiscent of the Sazabi.
• The boosters were also replaced with large flexible thrusters mounted in a wing-like arrangement on its back. Sporting multiple vernier thrusters throughout its frame, the unit is capable of achieving precise movements and high speeds.
• With its overwhelming combat ability, crimson body, and mono-eye sensors, the Sinanju reminds all who see it of the legendary "Red Comet".
  

• Kicking off the future of the modern Master Grade: the classic RX-78-2 Gundam 3.0!
  
• August 2013 marks the next step in the ever-shifting evolutions of Bandai's Gunpla model system! Designers have worked nonstop to update the idea of the realistic Mobile Suit kits- from the RX-78-2 Gundam, Ver. 1.5, Ver.Ka, Ver. One Year War 0079 to the Ver. 2.0, the RX-78-2 Gundam has led the charge in the evolution of the Master Grade kit. The Ver. 2.0 created the modern standards for the Master Grade model, continuing with December 2012's v Gundam Ver.Ka. This first 3.0 includes advances in sliding armor, color and movement-based parts division- technology that puts forth a new sort of potential for Gunpla. Through the years of trial and error, the RX-78-2 Gundam has served as a benchmark of the technological evolutions driving forward the realism and detail of the Master Grade- working to recreate the designs you know and love as scale models, and working to reimagine these designs in ways that will expand your view of the Suits. 
  
• With the release of the RX-78-2 Gundam, Master Grade 3.0 has begun.
  
• Using a fusion of exterior interlocking armor that integrates with the poseable inner frame, this kit achieves an even better range of movement than the Ver. 2.0 and it's removable armor systems. In addition, movable accent pieces, such as shoulder armor, enable an even greater level of mobility than before.
  
• Backpack cover and shoulder armor is movable, giving improved flexibility in the arm joints.
  
• Rear leg armor enables better range of motion in the ankle joints. 
  
• Includes paintable material for the internal structure for easy detailing.
  
• Accessories: Beam Saber x2, Beam Rifle, Shield, Hyper Bazooka
  

• From "New Mobile Report Gundam W Endless Waltz The Glory of Losers", Wing Gundam Proto Zero appears as MG. 
• The parts are completely newly molded and functions for the full transformation are accommodated. The movable frames made of new materials are paintable. 
• Full transformation of MS -  ?? Neo-Bird can be re-created with various gimmicks such as the 180 degrees rotation of its head part and the lower body part. 
• The conspicuous wings have various gimmicks such as the deployment function. The side armor fins on its waist are movable. 
• The hatches of the machine cannons on its shoulders are openable. The quadruple barreled Vulcan is precisely re-created. 
• The shoulder armor is dual structure and openable. The storage gimmicks for the beam saber on its shoulder and Verniers inside of the shoulder armor are precisely re-created. 
• The overwhelming "Twin Buster Rifle" can be separated into the right and left. 
• The original marking produced by Hajime Katoki is included. 
• A display stand is included. The special joints for the kit make it possible to display it in MS mode and Neo-Bird mode in midair. 
• Runner x18, Foil sticker x1, Dry decal x1, Tetron sticker x1, Instruction manual x1

[Daban] 1/100 Gundam Astray Red Frame (MG)

MG 1/100 RMS-099 Rick Dias

• This Master Grade MS-18E Kampfer is fully posable at all joints. 
  
• It features extensive internal detail, such as individually-posable finger joints. 
  
• If the normal Master Grade magic wasn’t enough, it also comes with numerous weapons, including the beam saber, 2 Giant Baz bazookas, Sturm Faust with an extra round, a shotgun with detachable shoulder stock, and the chain mine. 
  
• Most of these mount right on the mech’s back or hips for firing and/or storage. 
  
• Of course, the kit is also molded in color, and features easy snap assembly.
  

• From the anime Mobile Suit Gundam, ace pilot M’Quve’s signature Suit joins the Master Grade lineup! 
  
• Double hip joints allow wide, sweeping range of motion in the hips. 
  
• LED light up gimmick in the sword uses a CR1220 coin battery (sold separately) for dynamic display options! .
  
• Shield features a complex internal structure and can store Hide Bombs (Hide Bombs included for deployed or stored state.)
  
• Includes MQuve figure in 1/100 scale and 1/20 scale.
  
• Accessories: Beam Sword x1, Shield x1
  

• MSM-03 Gogg (MG)

[Daban] 1/100 Jesta (MG) Clear Version

Daban 1/100 RX-0 Unicorn Gundam + MS Cage

Manufacturer: DABAN

[Daban] MG 1/100 Avalanche Exia Metal Build Alike Version

A new refined version of the MG Gun dam F91 as part of the GunPla Evolution project, from the animated movie “Gun dam F91”!  Careful research has been conducted to recreate not only the physical appearance but also its various action gimmicks including an LED housing in the chest backpack assembly (BAN217846 White LED sold separately) for representing the heat dissipation that generates the Metal Peel-off Effect (MPE) in the anime.  The F91’s face open gimmick is now correctly implemented and can split open to the sides or displayed with a solid piece. Shoulder fins and leg thrusters have a new deployment mechanism allowing for various angle adjustments. Display it together with BAN225768 RE-100 Vigna Ghina!

MG 1/100 Gundam Avalanche Exia