- 5 years since the release of the last Perfect Grade comes the long-awaited PG 00 Raiser!
- The very first Perfect Grade release from the anime Mobile Suit Gundam 00!
- Equipped with a clutch mechanism to steady the Suit"e;s joints, allowing it to hold dynamic poses with ease!
- Anime-accurate GN Drive included, featuring lights and spinning action. Of course, the head lights up as well.
- More equipment than has you"e;ll ever need!
- High level of detail creates a truly realistic fighting machine.

- Accessories: GN Sword II x1, GN Sword III x1, GN Beam Saber x1, GN Shield x1, GN Missile A/S x1, GN Condenser x1, Particle Disrupting Missile x1, Hand Missile Unit x1

• From the OVA Mobile Suit Gundam Wing: Endless Waltz comes the newest Perfect Grade kit: the Wing Zero Custom!
  
• With a wingspan of over 27 inches and a height of 11 inches, this kit’s impressive silhouette eclipses many other Suits both in height and width! 
  
• Die-cast joint parts give the Suit a sturdy construction and low center of gravity and enable the builder to tighten them easily if needed.
  
• Rear center wings can be expanded with a spring mechanism for cleaning, and the large side wing’s feathers extend to give an impressive wingspan.
  
• Shoulder-mounted Vulcan Cannon hatches can be opened, and the cockpit hatch slides forward to open and reveal pilot Heero Yuy
  
• Center chest and “eye” cameras light up using included LEDs (batteries required)
  
• Rifle accurately moulded, fingers individually jointed and camera eyes moulded in transparent colored elements. 
  
• 
  
• Accessories: Accessories: Twin Buster Rifle, Beam Saber x2
  

• An extremely detailed and highly engineered model kit of the Gundam Mk 2 from "Mobile Sut Zeta Gundam!" 
  
• Furnished with an internal skeleton featuring pistons, sensor arrays, as well as LED powered e07/1/2014 (CR1220 battery sold separately), the Mk 2 embodies the mechanical complexity and attention to detail embodied in the Perfect Grade line. 
  
• Standards for the Perfect Grade line include fingers that have individual articulation, while actuators move in sync with arm and leg joints. 
  
• Mk 2 features many opening hatches and swiveling components as if it were a real machine undergoing maintenance. 
  
• Beam rifle, beam saber, bazooka, head Vulcan, shield are included. Runner x 30, Foil sticker x1, Marking seal x1, Decal x1, Led unit, Instruction manual.
  

The Bandai PG 1/60 Gundam Astray Red Frame is exquisitely detailed with great attention paid to reproducing its intricate mechanisms.

This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

- The ultimate "Strike Freedom Gundam" has been refined by Kakito Hajime!! - The greatest sense of size among the PG. With it -  s greatest feature, the Super Dragoon in its fully expanded state, it becomes the largest size class in the history of Perfect Grade. - Custom Display Stand for displaying Strike Freedom Gundam is included. The use of custom stand with the ability to adjust angles enables you to display the model in a dynamic action pose. - The 3 Points for reproducing the Ultimate "Strike Freedom Gundam"!! The frame structure exposed during the High-Matt Mode/Full-Burst Mode has been processed with Extra Finish, emitting golden shine, drawing out the attractiveness even more. - [Super Dragoon Extending Mode Gimmick] By sliding the Super Dragoon, each part linked to it will be expanded to the firing mode. - [Mobile Interior Frame Structure Fully Newly Produced] The golden parts are drawn out by sliding the joints. The exterior with a sliding gimmick installed, in conjunction with the interior framing that has evolved from the PG Strike Gundam, along with the golden parts with Extra Finish processing, effectively shows the gold parts. - [New Mechanism used in the Joints] The parts that supports the weight such as hip and legs etc. has been armed with new mechanism. By the extra support of the joint, you will be able to enjoy making the poses that comes to mind. - Accessories: Beam Shield, Beam Rifle x2, Beam Saber x2, Xiphias 3 Rail Cannon x2, Super Dragoon x8, Custom Display Base *Requires 2x LR41 batteries for LED sold separately. Strike Freedom Gundam

Strike Freedom Gundam - Full Blast Mode


Strike Freedom Gundam - Perfect Grade


Stand for Strike Freedom Gundam 1/60

• Movable mechanics were reproduced within Action Mechanics Models 'and' complete transformation] to
  
• Zeta Gundam, the best of both models. Gimmick Built-parts issue.
• Expand the abdomen and the head cover in conjunction with mobile chest.
• Work together to deploy a dedicated beam rifle scope barrel / grip /.
• Built-saber is emitting gimmick (1) clear edge beams and parts (2) is attached.
• Deformable skeleton (full frame mover) in combination with external armor
• Pursued the reality of the Mobile Suits.
• Combined with a snap-fit \u200b\u200bassembly and service.

• The transformation from Unicorn Mode to Destroy Mode including the opening of the face guard can be perfectly recreated. 
• The entire red Psycho Frame is made with a unique light-focusing resin. 
• A magnet is inserted in the Blade Antenna, which can be opened and closed during the transformation, in order to keep the antenna beautifully in Unicorn Mode. The interior of the antenna, which is exposed in Destroy Mode, is gold. 
• The range of movement of the elbows and knees is broadened to the utmost limit, without damaging its appearance. 
• Includes a lot of weapons such as a Beam Magnum, a Hyper Bazooka and Beam Gatling Guns. 
• The Beam Gatling Guns can be combined with the Shield and worn on its leg. 
• A display stand is included to allow a wide range of weaponry to be displayed together with the Mobile Suit. Set the MS on the pillar of the stand and enjoy its dynamic poses which are special and unique to 1/60 scale. 
• Figures of Banagher Links, standing and sitting, are included. 
• Original marking stickers for the kit are included. 
• Psycho Frame emits UV lights by incorporating the LED Unit for PG 1/60 RX-0 Unicorn Gundam, sold separately. 
• Runner 47, Slide mark x1, Foil sticker x1, Instruction manual x1 

• Latest news : Shipment has arrived.
• This is completed set of PG Unicorn Gundam + LED Set at super saver price!
  
• PG Unicorn Set:
  
• Fully transformable (Face guard "expansion" included)
  
• "Third form" realized
  
• Red psychoframe in special glow plastic
  
• "Transformation" uses magnet in antenna; Interior of the antenna is gold color
  
• Articulation of the elbow and knee joints able to perform a wide range of movements
  
• Psycho frame UV emission by incorporating a dedicated LED unit (sold separately)
  
• Accessories: Shield, beam magnum, beam Magnum for spare magazine, beam Gatling gun x— 2, saber x— 4 (beam parts x— 2), hyper-Basuka, dedicated display base, 
  
• LED Unit:
  
• A set of LED units to be UV emitting [PG 1/60 RX-0 Unicorn Gundam]
  
• For use with Psychoframe with 29 LED units, and one for the eyes, making the total 30 LED units
  
• Height Approx: 361mm
  
• This is pre-painted plastic model kits and require snap-fit assembly only.
  

[Daban] 1/60 GAT-X105 Strike Gundam (PG)

[Daban] 1/60 Gundam Unicorn (PG)

P-Bandai: PG 1/60 Unicorn Gundam 03 Phenex [Gold Plated] [REISSUE]

P-Bandai PG 1/60 Gundam Astray Blue Frame (2nd Issue)

*** PRODUCT SPECIFICATION***

• 1. Head Height : 260MM
• 2. Height : 285MM
• 3. Depth : 151MM
• 4. Mega Cannon Length : 324MM
• 5. Mega Shield : 240 x 130MM
• 6. Plastic parts : Approx~ 1650 pcs
• 7. Maintenance valve : 55
• 9. Valve metal hinges : 19
• 10. LED = 28
• 11. Power Control Unit
• 12. Specified Platform and Stand Bundled
• 13. Premium Exclusive : Heavy Laser Rifle bundled

Gao Gao PG 1/60 OO Raiser Gundam

Daban 1/60 Exia Avalanche/Repair

Limited edition including -  

• PG Exia model kit
• PG Exia use LED
• PG Avalanche parts
• PG Repair parts

This is a Pre-Order Item, please don't combine this item with others product in 1 order.
Release Date: Jan 2021