Mr. BASE WHITE is useful for making a black, red or other dark-colored surface white. This newly developed product uses special pigments to completely hide the base color and aids application of detailed finishing and top coats. Because it also works as a surfacer, it can be used to hide small imperfections. - Personal advice Clean the surface with sandpaper before applying surfacer, + after applying surfacer, kindly wait for a moment until the surface dries. - How long to wait for the this white base1000 to dry? Normally at minimum of time :), please wait an hour for it to dry to cover the surface. - Do I need thinner for this white base 1000 to dry? Since are using the bottles, you should thin them with a 50:50 or a 60:40 ratio to prevent "cobwebbing". "Cowebbing" - means the primer dries as soon as it is sprayed out of an airbrush, leading to an effect that looks like spider webs. You may also see some video on applying surfacer + white base 1000 by hobbyist http://www.youtube.com/watch?v=1qmk2TYeh1Y

• Mr Hobby Brand
• Mr. Surfacer is an important step for the painting process. You can use it to fill in all those little imperfections, and also acts as a primer to give a neutral background for a consistent color throughout your piece. 1000 contains fine granules, providing a moderate blend between the ultra fine particles of 1200 and more globular filler properties of 500.
  
• Mr. SURFACER 1000 contains finer granules than Mr. SURFACER 500. They are both used in much the same way. Due to the finer granules after sanding with waterproof sand-paper, a perfectly corrected surface is possible. Available in bottle and spray.
  
• great material for filling in gaps of two points.
• dries quickly, please apply this before painting 

• Mr. Hobby Brand
• Mr. Surfacer is an important step for the painting process. You can use it to fill in all those little imperfections, and also acts as a primer to give a neutral background for a consistent color throughout your piece. 1000 contains fine granules, providing a moderate blend between the ultra fine particles of 1200 and more globular filler properties of 500.
  
• great material for filling in gaps of two points.
• dries quickly, please apply this before painting.
• Useful for filling in bumps, dents, scratches, for removing bubbles, texturing and finishing bases. It is suitable for large-scale repairs and can be used as soluble putty.
  

• Mr Hobby Brand
• Mr. Surfacer is an important step for the painting process. You can use it to fill in all those little imperfections, and also acts as a primer to give a neutral background for a consistent color throughout your piece. 1000 contains fine granules, providing a moderate blend between the ultra fine particles of 1200 and more globular filler properties of 500.
  
• great material for filling in gaps of two points.
• dries quickly, please apply this before painting 

• The currently available Liquid Surface Primer is highly useful for filling seam lines and smoothing over scratches in small or difficult to reach areas since it can be applied with a modelling brush. However, since some modellers have found it difficult to paint over it with a lighter color, we now release this white-colored version of the liquid primer to solve this problem. 
• You can also thin out the primer with Tamiya Lacquer Thinner for convenient application with airbrushes. Each bottle contains 40ml.
  

• In order to smooth over small scratches etc., many modelers have created their own liquified putty by dissolving putty with lacquer thinner. Tamiya now makes this process a whole lot easier by releasing our very own liquified putty, Liquid Surface Primer. Just brush on over scratches, rough areas etc. and you will get that perfect smooth finish.
  
• Applies easily to small areas using a modeling brush
• Can be used on plastic, metal and wooden models
• Can be further diluted using Tamiya Lacquer Thinner, allowing it to be used in airbrushes.
• 1 bottle contains 40ml

• Mr Hobby Brand

Mr Hobby - MR.FINISHING SURFACER 1500 (Black) 40ml

Mr. FINISHING SURFACER provides a smooth finish on the surface of parts and does not easily fill in molded areas. The white FINISHING SURFACER released this time is most suitable for final finishing before painting a character model or car model or for final finishing of the base form of figure painting that calls for bright colors.

Mr.Surfacer 1200 contains finer granules than Mr.Surfacer 1000. They are both used in much the same way but, due to the finer granules after sanding with waterproof sand-paper , a perfectly corrected surface is possible.

Mr Finishing Surfacer 1500 - black primer micro filler in a convenient spray can. Perfect for a quick application without the need to clean your airbrush afterwards.Covers minor scratches and surface imperfections. Dries quickly for an ultra smooth finish which once dry can be sanded and polished further if needed. Can be applied in multiple layers as needed for that perfect finish.

This surfacer has reproduced the rust-proofing color used as the base color on tanks. Base coat painting on tanks can be done in one go, so that you can start painting the exterior within a shorter time.We have made this the same number as the widely used Surfacer 1000.

• Mr Hobby Mr. White Surfacer 1000 
• Since it is white, Mr.WHITE SURFACER is used to modify plastic model parts that are black or dark in color. If this is used on the entire model, only a thin over-coat of paint in the desired color is necessary.
  

• Undercoats for metal models and parts to make Mr.COLOR and other AQUEOUS HOBBY COLORS usable for surfaces.
• Paints adhere well and peeling is prevented. Available in bottle and spray.

Surfacer in mahogany color (dark brown).This surfacer can be applied to smooth the surface and it can also be applied as a dark brown base paint shading color, this gives depth to the end result after the basic color is applied on top.

Tamiya Basic Type Putty is used for filling in seams when assembling plastic model kits or RC models that use ABS or styrene plastic bodies. 

The putty is gray in color and may be applied with a flat surface tool. 

Note: 

Tamiya’s basic type putty is not intended to fill large gaps. It is meant to fill in seams and imperfections in plastic model surfaces. The basic putty may also be used for resin model, metal model and vinyl model applications. 

• High Density Type.
• Tamiya's epoxy putty in a smooth surface formula. This version is smoother and easier then the previous version. 
• Hint: Wet your tools or fingers with a bit of water while working with it to minimize sanding after.
  

• contains 50ML
• MODO Surfacer (Grey) 50ML
  
• Base color to apply on plastic model kits before apply other color

• contains 50ML
• MODO Surfacer (Black) 50ML
  
• Base color to apply on plastic model kits before apply other color

• Contains 50ML
• MODO Surfacer (White) 50ML
  
• Base color to apply on plastic model kits before apply other color

Mr Hobby - MR.FINISHING SURFACER 1500 (White) 40ml

• It can provide the smooth surface as well as GX114 SUPER SMOOTH CLEAR, and paint large area. Mr.SUPER SMOOTH CLEAR FLAT is developed on a concept of "make the surface smoother!". Because of including fluorine, it can provide the smoother surface campared with existing items (C182, B514) . Also it has ability that decreasing occuring of whitening phenomenon. So we can say this is the the high grade flat coat spray. When you spray this item to unpainted plastic models, it will look like all-painted. In addition, if the painted surface was smooth, the friction of each painted surfaces will be decreased, therefore... * It decrease the scratch occuring. * Joint parts moves smoothly.
  
• These are epoch-making ability for plastic model paints. Please use this as the special finishing coat for your precious works!
  
• Fluorine is oil or water resistant substance, but you can paint other paint like Mr.Color, Aueous Hobby Color or Mr.Weathering Color over this spray.