PRODUCTS

Price Clear







Brand

Availability

WATER DECALS

Showing 91 - 120 of 164 products

Quick View
Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam
SAVERM8.90

Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam

- Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
Water Decal for HG 1/144 Gundam Heavyarms EW
SAVERM8.90

Water Decal for HG 1/144 Gundam Heavyarms EW

- Water Decal for HG 1/144 Gundam Heavyarms EW
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
Water Decal for MG 1/100 00 QAN[T] Gundam
SAVERM8.90

Water Decal for MG 1/100 00 QAN[T] Gundam

- Water Decal for MG 1/100 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
Water Decal HG Beargguy III
SAVERM8.90

Water Decal HG Beargguy III

- Water Decal for HG BEARGGUY III water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
Water Decal HG 1/144 00 QAN[T] Gundam
SAVERM8.90

Water Decal HG 1/144 00 QAN[T] Gundam

- Water Decal for HG 1/144 00 QAN[T] Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
Water Decal for MG 1/100 GAT-X103 BUSTER Gundam
SAVERM8.90

Water Decal for MG 1/100 GAT-X103 BUSTER Gundam

- Water Decal for MG 1/100 GAT-X103 BUSTER Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
Water Decal PG 1/60 FX-550 SKY GRASPER
SAVERM17.18

Water Decal PG 1/60 FX-550 SKY GRASPER

- Water Decal for PG FX-550 SKY GRASPER water decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 21 cm x 24 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM18.80
RM18.80 Add to cart
Quick View
Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam
SAVERM13.98

Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam

- Water Decal for PG 1/60 MBF-02 Strike Rouge Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11.5 cm x 13.5 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunpla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM10.00
RM10.00 Add to cart
Quick View
HG 1/144 STRIKE FREEDOM Metal Effect Water Decal
SAVERM15.08

HG 1/144 STRIKE FREEDOM Metal Effect Water Decal

- Water Decal for HG 1/144 Strike Freedom Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 10 cm x 9 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM14.90
RM14.90 Add to cart
Quick View
Water Decal MG 1/144 Gundam Seed Blitz Gundam
SAVERM8.90

Water Decal MG 1/144 Gundam Seed Blitz Gundam

- Water Decal for Water Decal MG 1/144 Gundam Seed Blitz Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
Water Decal RG/ HG 1/144 00 QAN[T] Gundam
SAVERM8.90

Water Decal RG/ HG 1/144 00 QAN[T] Gundam

- Water Decal for RG/ HG 00 QAN[T] OO?Qan[T] 
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
Water Decal for MG 1/100 RX-178 MK-II MK2 AEUG Gundam
SAVERM19.90

Water Decal for MG 1/100 RX-178 MK-II MK2 AEUG Gundam

- Water Decal for MG 1/100 RX-178 MK-II MK2 AEUG Gundam Water Decal
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 15 cm x 20 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM10.00
RM10.00 Add to cart
Quick View
[VT] Water Decal for Gundam Machine Nest Domain Base - S Size
SAVERM10.00

[VT] Water Decal for Gundam Machine Nest Domain Base - S Size

[VT] Water Decal for Gundam Machine Nest Domain Base


This is a Water Decal for Gundam Machine Nest Domain Base Series
Small Size

RM8.00
RM8.00 Add to cart
Quick View
[VT] Water Decal for Gundam Machine Nest Domain Base - L Size
SAVERM14.00

[VT] Water Decal for Gundam Machine Nest Domain Base - L Size

[VT] Water Decal for Gundam Machine Nest Domain Base


This is a Water Decal for Gundam Machine Nest Domain Base Series
Large Size

RM10.00
RM10.00 Add to cart
Quick View
[Da Lin] Water Decal Universal Military Emblem Series, Zeon Federation Army Gouf Zaku
SAVERM8.00

[Da Lin] Water Decal Universal Military Emblem Series, Zeon Federation Army Gouf Zaku

[Da Lin] Water Decal Universal Military Emblem Series, Zeon Federation Army Gouf Zaku

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for Full Mechanics Raider Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 GTO YMS-08B Dom Test Type
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 GTO YMS-08B Dom Test Type

[Da Lin] Water Decal HG 1/144 GTO YMS-08B Dom Test Type

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 GTO YMS-08B Dom Test Type
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 Zaku II + Big Gun Set Thunderbolt Vers.
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Zaku II + Big Gun Set Thunderbolt Vers.

[Da Lin] Water Decal HG 1/144 Zaku II + Big Gun Set Thunderbolt Vers.

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Zaku II + Big Gun Set Thunderbolt Vers.
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 D Gun First Gundam
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 D Gun First Gundam

[Da Lin] Water Decal HG 1/144 HG 1/144 D Gun First Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 HG 1/144 D Gun First Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 GM Sniper II
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 GM Sniper II

[Da Lin] Water Decal HG 1/144 GM Sniper II

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 GM Sniper II
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 Build Fighter Wing Gundam Zero Honoo
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Build Fighter Wing Gundam Zero Honoo

[Da Lin] Water Decal HG 1/144 Build Fighter Wing Gundam Zero Honoo

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Build Fighter Wing Gundam Zero Honoo
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 Ez8 Gundam
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Ez8 Gundam

[Da Lin] Water Decal HG 1/144 Ez8 Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Ez8 Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 Efreet Schneid
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Efreet Schneid

[Da Lin] Water Decal HG 1/144 Efreet Schneid

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Efreet Schneid
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 Gusion Rebake
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Gusion Rebake

[Da Lin] Water Decal HG 1/144 Gusion Rebake

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Gusion Rebake
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 R-Jarja (AMX-104)
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 R-Jarja (AMX-104)

[Da Lin] Water Decal HG 1/144 R-Jarja (AMX-104)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 R-Jarja (AMX-104)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 Gundam Vual
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Gundam Vual

[Da Lin] Water Decal HG 1/144 Gundam Vual

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Gundam Vual
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 Asshimar
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Asshimar

[Da Lin] Water Decal HG 1/144 Asshimar

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Asshimar
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 Frame Shiden Custom (Ryusei-Go)
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Frame Shiden Custom (Ryusei-Go)

[Da Lin] Water Decal HG 1/144 Frame Shiden Custom (Ryusei-Go)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Frame Shiden Custom (Ryusei-Go)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 Frame Shiden Custom (White / Yellow)
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Frame Shiden Custom (White / Yellow)

[Da Lin] Water Decal HG 1/144 Frame Shiden Custom (White / Yellow)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Frame Shiden Custom (White / Yellow)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 Narrative Gundam C-Packs
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Narrative Gundam C-Packs

[Da Lin] Water Decal HG 1/144 Narrative Gundam C-Packs

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 Narrative Gundam C-Packs
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart
Quick View
[Da Lin] Water Decal for HG 1/144 RGM-96X Jesta
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 RGM-96X Jesta

[Da Lin] Water Decal HG 1/144 RGM-96X Jesta

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for HG 1/144 RGM-96X Jesta
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart

Showing 91 - 120 of 164 products

Contact Us