Price Clear







Showing MOBILE SUIT GUNDAM product(s)

Showing 301 - 330 of 357 products

img
SAVERM77.40

RE/100 MS-08TX [EXAM] Efreet Custom

  • The Efreet Custom, long popular in games and side stories, is finally a kit! 
  • Its charm is emphasized by the RE/100 series’ refined construction, detailed exteriors, and easy but flexible assembly. 
  • Translucent parts are used for its backpack-stowable heat saber. 
  • Its hexa-linked missile pod is mounted on a polycap-shaft joint for removability and adjustability!

RM132.30
img
SAVERM31.90

[191] HG REVIVE 1/144 RX-78-2 Gundam

  • Adopting the latest format, both easy assembly and high mobility are realized. 
  • Similar parts amount, but the number of movable joints increased 150%, compared to "HGUC RX-78-2 Gundam" launched in 2001. 
  • The range of mobility is greatly improved as well as the number of movable joints is increased. 
  • Powerful poses seen in the anime can be recreated. 
  • Parts are located on the runners under consideration to maximize "easy-assembly". 
  • Kusabi (wedge) Gate" is adopted to the runners to minimize gate marks. 
  • The double-jointed elbows and knees enable the MS to kneel down on one knee, and unsheathe the Beam Saber. 
  • Both vertical and horizontal movement in the waist. 
  • A Beam Rifle, two Beam Sabers, and a Hyper Bazooka (mounts on the waist) are included. 
  • Weapon-wielding hands and open hands (both left and right) are included to recreate various poses. 
  • Runner x5, Foil sticker x1, Instruction manual x1

RM40.00
img
SAVERM49.90

HGUC 1/144 GUNDAM OPERATION V SET

  • Special Edition manual and special marking seal that can dress up the three aircraft of the V strategy.
  • A Set of 3 Gundam Gun Cannon Guntank of HGUC which includes RX-78, RX-77, RX-75

RM106.00
img
SAVERM69.86

RE/100 Gundam GP04 Gerbera


  • The distinctive Strum Boosters on the back are reproduced. 
  • Three boosters are detachable. Upper two boosters can be connected to the Saber Rack. 
  • The Landing Skid of the lower booster can be retracted or lowered with replacement parts. When lowered, the Landing Skid can be used to physically support the Gundam in a standing position. 
  • An abundance of weapons such as a Long Range Rifle, Beam Rifle and Shield are included. 
  • Runner x10, Foil sticker x1, Tetron sticker x1, Instruction manual x1

RM140.00
img
SAVERM29.90

[197] HG REVIVE 1/144 Gyan

  • Accessories: dedicated beam saber, dedicated shield

RM42.00
img
SAVERM41.10

P-Bandai Exclusive: HGUC 1/144 Guncannon (21st Century Real Type)

  • HGUC Guncanon - 21st Century Real Type - P BANDAI LIMITED
  • It might be delayed if shipment hold by shipping authority.

RM108.70
img
SAVERM20.60

P-BANDAI Exclusive: HGUC 1/144 RX-78-2 GUNDAM (21st Century Real Type)

This is P-Bandai Japan limited release item!

Kawaguchi redesign the HGUC RX-78-2 Gundam on 21st century (1980s) real type design!


Set include beam rifle, sheild, missile launcher, beam saber
This is pre-painted plastic model kits and require snap-fit assembly only.

RM99.20
img
SAVERM34.20

P-Bandai Exclusive: RE/100 Efreet Schneid

  • P-Bandai Exclusive: RE/100 Efreet Schneid

RM217.40
img
SAVERM140.00

[Daban] MEGA SIZE 1/48 RX-78-2 Gundam

[Daban] 1/48 RX-78-2 Gundam (MEGA SIZE)
Series: Gundam
Grade: MEGA SIZE
Manufacturer: Daban
Scale:1/48

Please note that this is not Bandai product

RM160.00
img
SAVERM398.00

[Limited Production] PG 1/60 RX-78/C.A Casval Gundam

[Limit Production] PG 1/60 RX-78/C.A. Neo Zeon Casval's Gundam EXF Ver.


RM800.00
img
SAVERM271.60

[Limited Production] PG 1/60 RX-78-2 Gundam (Kunio Okawara Ver.)

P-Bandai Exclusive: PG 1/60 RX-78-2 Gundam Kunio Okawara Color Ver.

RM567.00
img
SAVERM399.00

[Limited Production] PG 1/60 RX-78-2 Gundam (Chrome Plated Ver.)

Limited Production : 1/60 (PG) RX-78-2 GUNDAM CHROME PLATE VER


To all GUNDAM FANS! 

This is Bandai's Perfect Grade 1/60 PG RX-78-2 GUNDAM (CHROME PLATED VERSION!) gunpla model kit. 

The truly amazing limited production for certain countries in Asia. One of the best designed inner frame detail even until today. Everything you ever hope for detail and possibility for this model are achieved! Several little actuators, hydraulic pistons are inclusive in the inner frame as well. 

Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For all true Gundam hobbyist, there's simply no question about whether you should order this. 

This is a LIMITED PRODUCTION kit! Don't miss this!

RM799.00
img
SAVERM44.90

P-Bandai Exclusive: HGUC 1/144 Crossbone Gundam X3

P-Bandai Exclusive: HGUC 1/144 Crossbone X3

RM155.00
img
SAVERM123.80

MG 1/100 RX-78-2 Gundam The Origin (Special Edition)

MG 1/100 RX-78-2 Gundam The Origin [Special Edition]


[ACCESSORIES]

  • LED unit [pink / yellow] 
  • Early type beam rifle x 1
  • Late type beam rifle x 1
  • Hyper bazooka x 1 
  • Beam saber x 2
  • Shoulder cannon x 1
  • Effect parts

RM211.60
img
SAVERM215.90

E.F.G.F. M91A5 Main Battle Tank

Bandai's U.C. Hard Graph series combines elements of the Gundam universe with 1/35-scale military modeling, creating a new genre that appeals to fans of both types of modeling. The latest entry in the series is this massive M61A5 Semovente MBT, featuring two huge main guns! The sharply detailed kit includes flexible belt-style tracks that are connected with metal pins, decals for two versions, and three figures. Also includes photo-etched metal detail parts, wire cables, and clear parts. Parts are molded in multiple colors.

RM323.20
img
SAVERM41.80

[233] HGUC 1/144 Messer

Release Date : Jun 2020
Estimate Delivery : July 2020

-Messer (provisional) from [Mobile Suit Gundam Flash Hathaway] has a movable gimmick inside the fuselage and appears in the HG series!


-By providing movable parts in various places, the structure that maximizes the action pose of the messer is achieved.
-The side armor is equipped with a slide gimmick that allows for more leg movement.
-Includes beam rifle, beam saber and shield.

[accessories]

* Beam rifle x 1
* Shield x 1
* Beam saber x 2
* Foil seal x 1

RM108.00
img
SAVERM60.00

P-Bandai: MG 1/100 MS-06FS Zaku II (Garma Zabi Custom) [Reissue]

  • Premium Bandai based announces the release of the Garma Zabi\'s Zaku II! 
  • The kit is based on MG 1/100 Zaku II Ver. 2.0 with added minor detailing to adapt the FS type Zaku II exterior design. 
  • The kit also comes with a 175mm Recoilless Rifle and a unique heat hawk which is completely newly molded for master grade!
  • The kit is also completed with Garma Zabi dedicated decal seals to help detail the kit.

RM260.00
img
SAVERM108.00

SD Ex-Standard Hello Kitty/RX-78-2 Gundam

Collaboration project of Hello Kitty who celebrated 45th and Gundam who celebrated 40th!

- Gundam and Hello Kitty appear as a set of SD EX-STANDARD!
- With apple parts and apple-shaped pedestal.
- Kitty can also sit down.

[accessories]
* Apple x 1
* Base x 1
* Armed x 1

RM92.00
img
SAVERM39.80

[234] HGUC 1/144 MS-06S ZAKU II

-Gunpla 40th Anniversary! From [Mobile Suit Gundam], Char\'s Zaku II appears in the HG series with new modeling!

-Revive proportions in [Mobile Suit Gundam] with the latest technology.
-The mono-eye can be moved by moving the operation rib on the back of the head.
-The arm also rotates the forearm in addition to the upper arm, ensuring a large range of motion.
-Includes soft material parts that further extend the range of motion of the waist. It is a selection type of plastic parts and soft material parts.
-Three weapons can be attached to the waist.

[accessories]
* Soft material skirt parts x 1 set
* PS molded skirt parts x 1 set
* Zaku machine gun x 1
* Zaku Bazooka x 1
* Heat Hawk x 1
* Foil seal x 1

RM56.00
img
SAVERM12.40

[OP-09] SD Gundam Cross Silhouette Silhouette Booster 2 [White]

- A luxurious set that further expands the play of existing line-up products.
- Reproduce the wave rider by attaching [SDCS Zeta Gundam] sold separately.
- The Zaku I reproduction exterior can easily reproduce the Zaku I head even with a single item. Dummy parts for the mono eye are also included.
- 2 types of [joint brush-up parts] that can add a swing mechanism to the hip joint are included.
- [Upgraded thigh parts for CS frame] is designed to cover the seams of parts.
- Comes with a general-purpose expression hand and beam saber.

[Accessories included]
- Swing hip joint parts for CS / SD frame x 1 each
- Square thigh parts for CS frame x 2
- General-purpose facial expression hand x 2
- Zaku I reproduction parts x 1 set
- Zeta Gundam Wave Rider Reproduction Parts x 1 set
- Beam saber x 2

RM23.50
img
SAVERM49.80

HG 1/144 RX-78-2 Gundam [Beyond Global]

-Gunpla 40th Anniversary! The [RX-78-2 Gundam] designed by Kunio Okawara is integrated with the technology cultivated in the [HG Series]!

-Pursue [Beautiful posing] and [Mobility and proportions]. A number of gimmicks are provided throughout the body that allow for natural poses.
-A design that reexamines the design of First Gundam and pursues it to the limit as [BEYOND GLOBAL].
-Adopting forward bending and swinging movable structure on the body. The neck axis is also movable back and forth.
-A joint that bends inward at the base of the thigh to achieve a more human-like pose.
-Independent movement of the wrist allows free movement of the jointed shield.
-The wrist block can be moved as a separate part with a ball joint, and can be used to produce powerful movements such as gripping a fist.
-The hip joint swings and moves greatly forward. In addition, the rear skirt expands greatly, allowing it to move backwards.
-The block on the side of the chest is responsible for the movement of the part corresponding to the scapula.

[accessories]
Beam rifle x 1
Shield x 1
Beam saber x 2
* Foil seal x 1

RM70.00
img
SAVERM35.80

[17] SD Gundam Cross Silhouette RX-78-2 Gundam & MS-06S ZAKU II

-Gunpla 40th Anniversary! [RX-78-2 Gundam] and [Char\'s Zaku II] come out as a special color Ver. Set from the SDCS series!

-Includes 2 CS frame and various weapons.
-Let\'s reproduce that famous scene on the cross display!

[accessories]
* Beam saber x 1
* Beam rifle x 1
* Shield x 1
* Zaku machine gun x 1
* Zaku Bazooka x 1
* Heat Hawk x 1
* Missile pod x 2
* Foil seal x 2

RM72.00
img
SAVERM109.30

P-Bandai: MG 1/100 Rick Dom (Dozle Zabi Use) [REISSUE]

Reissue Date: July 2020
Estimate Delivery: August 2020

Dozle Zabi's Dom joins the Master Grade series as Premium Bandai webshop exclusive. The kit shares the same molds with the regular released MG Dom with added "Dozle Zabi" aesthetics and detailing. One of the greatest things that came with the kit is the golden strips that wraps around on the sides of its armors, just like the Zaku version.

The kit also comes with unique heat hawk specialized only for Dozle Zabi! Also, this Dom will not be complete without Dozle Zabi's spiked armor features that were provided for its shoulders and manipulator armors.


RM310.00
img
SAVERM139.30

P-BANDAI: MG 1/100 MS-07B Gouf MQuve Custom [REISSUE]

Reissue Date: July 2020
Estimate Delivery: August 2020

M'Quve's Gouf arrives in the Master Grade kit form! The entire kit's armor shares the inner framing with the regular released Gouf Custom, with entirely new molded parts for its armor parts. 

The unique features of M'Quve's Gouf is also combined and completed with golden seals that adds some elegant looking detail to the kit!

RM280.00
img
SAVERM6.00

[NO. 47] FG 1/144 EMS-05 Agg

  • EMS-05 Agg (Gundam Model Kits)
  • Weight: 120 Grams
  • The EMS-05 Agg is a Principality of Zeon mobile suit featured in Mobile Suit Variation.

RM12.00
img
SAVERM6.00

[NO. 30] FG 1/550 MAN-08 Lalah Sune Mobile Armor

  • MAN-08 Lalah Sune Mobile Armor
  • Release Date: October 1981
  • The MAN-08 Elmeth is a prototype mobile armor the Mobile Suit Gundam television series and the Mobile Suit Gundam III: Encounters in Space movie.

RM12.00
img
SAVERM6.00

[NO. 22] FG 1/144 MSM-04 Acguy

  • MSM-04 Acguy (Gundam Model Kits)
  • Release Date: August 1981
  • Weight: 120Grams
  • The MSM-04 Acguy is a mass-produced amphibious mobile suit featured in the anime series Mobile Suit Gundam.

RM12.00
img
SAVERM6.00

[NO. 10] FG 1/144 MSM-07 ZGok

  • MSM-07 ZGok (Gundam Model Kits)
  • Release Date: December 1980
  • Weight: 120 Grams

RM12.00
img
SAVERM6.00

[NO. 9] FG 1/144 MS-07 Gouf

  • MS-07 Gouf (Gundam Model Kits)
  • Release Date: November 1980
  • Weight: 120 grams
  • The MS-07B Gouf is a mass production ground close-quarters combat mobile suit.

RM12.00
img
SAVERM9.90

FG 1/144 MS-R09 Rick Dom

MS-R09 Rick Dom in First Gundam Series release in 1981. 

1/144 Scale, best fr collection.

RM20.00

Showing 301 - 330 of 357 products