• Pull-out hip and shoulder joints.
  
• All joints are movable fingers 10.
  
• Mono Movable nozzle head and ears.
  
• Refer to the left and right arm stand.
  
• Detachable head.
  

A target model kit of the MG clear parts campaign to celebrate Gunpla 30th anniversary! Comes with 1 clear body parts runner. You can enjoy the inner structure through the clear body parts.

MS-09 Dom (MG)

• EXTREME VS. Major Model appeared in the original MS Ekusutorimugandamu!
• Discovery of a new action by the militants pose a motif instrument.
• The four parts are included wrist, expand the range of expression.
• The guitar can be stored in the shield-type rifle.
• Reproduced in blue light-emitting clear parts.
• Accessories: beam rifle, beam saber, shield
  

• "V operation" Gundam reinforced equipment for Gundam Ver.2.0 "G fighter" appears in a full spec. 
  
• The power reactor and the missile launcher unit of a new design are involved to B mechanism. 
  
• Gundam can become independent with stability according to the step of the tiptoe and the heel. 
  
• The caterpillar gives priority to the forming reproduction made of Pra, and reproduces various forms. 
  
• Accessories: 1 and shield × hyper hammer × one two kind of attachment for action base Landing gear ×1 expression and one Kiza ×1 and 1 and mass standing × row standing × two kinds of maintenance staff
  

• MG RX-78-2 Gundam (Ver.1.5)
  
• This update to the original MG RX-78-2 features enhancements including a prebuilt internal skeletal leg and deisgn appearance similar to the Perfect Grade Gundam as well as including weapons like the Gundam hammer and Beam Javellin. Core Figther, beam, sabers, beam rifle, bazooka still included!.
  
• Upgrade product of the master's first grade! !
  

• Comes with a blade antenna head parts - And only wrist was new to the Zaku Bazooka. Wrist Zaku machine gun, heat hawk also supported. Also included rear rack. 
  

BB Cross Bone Gundam X2

BB Gundam Blue Destiny

Not only is this Gelgoog Commander Type a highly modified version of the mass produced Gelgoog, it also comes in red and pink colors to identify it as Char's own personal custom mecha and to compliment his nickname, the Red Comet. Char's custom Gelgoog is armed with a beam rifle, beam Naginata, and a shield. (Note: Display stand is not included.)

The amphibious green mobile suit from "Mobile Suit Gundam" has arrived in Bandai's HGUC series! This snap-fit-assembly kit comes molded in color and features articulated joints, plus impressive inner mechanical detailing for its head and chest areas. Its multi-directional mono eye is movable through its rails underneath the armor.

Born from the collaboration between Bandai Namco Games, Bandai, Sunrise, and Banpresto for their "Harmony of Gundam" project, the Zaku I Sniper Type is a new Zeon Mobile Suit especially created for the new "MS Gundam: Bonds of the Battlefield" arcade game. 

Original Zaku in the superb 1/144 HGUC series (note that some overseas arms of Bandai repackaged the "8th MS Team" version of the Zaku, and formed it in red plastic, calling it Char's Zaku, but that was never released in Japan, and a completely different tooling from this item). 

It's been a good year so far for Gundam Modellers. Bandai's Gunpla 30th Anniversary campaign has seen some stellar releases and now we are being treated to the Extra Finish Version of the Perfect Grade RX-78-2! Molded in a special finish that really gleams under lighting, this Gundam is otherwise identical to the original kit released in 1998 and features an incredible level of INNER detail. Just about everything you could hope for in terms of detail and poseability is here. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this! Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece is completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

• Okay, for a monster machine like this, with parts sticking out all over, and which is so top heavy it cannot stand on its own, the naming of "Ex-S" seems appropriate, considering the homonym "excess." 
  
• But gosh, it's sooo sharp looking... Let me come back to that point about standing up by itself: It can't. At first, when I saw that this kit came with a display stand to hold it up, I was greatly dissapointed, as I really was looking forward to building it. 
  
• But then I started thinking about all the other Gundam kits of mine that have fallen over and broken or lost parts when I had them posed someplace, and I began to think that maybe a display stand isn't such a bad idea after all... 
  
• Of course the kit can transform into the long-range "G-Cruiser" mode, similar to the Zeta Gundam, and the display stand itself also converts into a mode specifically designed for displaying the kit when it's in ship mode. A whopping 31 runners of parts in all! Get ready for hours of cuttin' 'n' snappin' with this baby!
  

By adding several new armor, weapons, and engine modules the engineers of Taskforce Alpha's Pegasus III were able to upgrade the basic MSA-0011 S Gundam into the super powerful Ex-S Gundam. The Ex-S Gundam has almost double the power of the original S Gundam, making it a fearsome unit indeed. The Ex-S Gundam still had three cockpits, but Ryu Roots was the only person who piloted the mobile suit, and due to Ryu's poor piloting skills it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.
With ALICE functioning as the co-pilot of the Ex-S Gundam "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could still take full control of the Ex-S Gundam, or any of its various components or weapons, at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryu were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and "she" was more than capable of compensating for Ryu's lack of skill.

For defensive purposes the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block which could nullify ranged beam attacks made against the mobile suit. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more after burners, additional propellant tanks, and thrusters.

Two new large thruster units were mounted on the Ex-S Gundam's back, giving the unit incredible thrust power and speed. Two large caliber beam cannons were mounted on both of the thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two large hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.

The Ex-S Gundam also had remote weaponry in the form of an incom, which was a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. But the Ex-S Gundam also featured two reflector INCOMs, stored in brackets in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs could not fire their own beams but instead were able to reflect incoming beam fire from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.

Like its predecessor, the Ex-S Gundam was also capable of undergoing a transformation into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam re-combined into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and the Ex-S Gundam would travel in this mode whenever it needed to travel over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in actual combat situations the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser would reach the battlefield and transform into the Ex-S Gundam.

Starter Pack # 2. For those looking to get into the Gunpla Hobby, here's the perfect fit. This set will include the HG RX-78-2 Ver. G30th and come with a 'Step Up Manual' which will show you little tips and tricks to give your model a better look. It will also come with a Gundam panel line marker!

Item Size/Weight : 25.5 x 19 x 5.5 cm / 218g

• - "Mobile Suit Gundam" G armor of Real Type Color (Gundam+G armor) that got into the news occasioned of the boom at the broadcasting this time with the movie poster etc. 
  
• is reproduced. Another marking etc. attached are newly scheduled. - Can be combined with the G-Fighter and Gundam to create "G-Armor," "G-Sky," "G-Sky Easy," "G-Bull," "G-Bull Easy," and "Gundam High Mobility" modes! 
  
• Main body and others accessory - Beam rifle: 1 - Beam saber: 2 - Shield: 2 - Hyper bazooka: 1 - Collaboration only for action base: 1
  

Bandai Gundam EX-18 Mobile Ship Argama Scale 1/1700

P-Bandai: HGBF 1/144 Amazing Z'Gok 

SD Gundam Cross Silhouette (SDCS) is a line of Super Deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. Introduced in June 2018, this series features inner frame technology, similar to Real Grade and Master Grade kits but on a smaller scale. Each kit's parts can be attached to either an 8.5 cm "SD" Frame, which features proportions inspired by Super Gachapon World: SD Gundam X, or a taller 9.5 cm "CS" frame with proportions inspired by SD Gundam G Generation Genesis.

The predecessor to the Zaku II this older green machine appears in the MG line with special variant machine gun and spiked shield. Also includes heat hawk Zaku II machine gun and bazooka.