BB-221 Guntank Simple instruction included in a box. Weight: 500g
The announcement of a 1/48 scale Gundam sent ripples through the modeling community and now, verily, it has come to pass. Once assembled it will stand 36.5cm (almost 15 inches) tall, but perhaps the most impressive aspect of this monstrous kit is that you don't need any tools! That's right! The pieces attach to the runner by a very thin length of plastic so you can break the pieces off with your hands! To make things even easier, Bandai has made it so that you can snap two runners together and then remove the individual pieces. There are even icons on the runners to indicate which part of the kit the pieces are for. The 1/48 Gundam comes with two 1/48 beam sabers and his large (even larger now) beam rifle, and shield. There is even a mini-booklet from Dengeki Hobby with detailed modeling tips for this model! Don't be intimidated by its size, this kit is a snap-technology as well. (The 1/144, 1/100, MG Gundam shown with the 1/48 one below is just for size comparison; all are not included.) ** The boxart were cropped to show the best quality image
[006] HGUC 1/144 MSM-07 ZGok Mass Production Type
A Mobile Suit made famous at the hands of ace pilot Lieutenant Ramba Ral, the MS-07B Gouf is a high-performance machine that strikes fear in its opponents with its powerful Heat Saber and Heat Rod at its disposal. This much-anticipated "Version 2.0" update to its 2000-released Master Grade kit not only utilizes the same amazingly detailed and super-poseable inner frame from MG MS-06J Zaku II Ver. 2.0, Bandai went a step further in enhancing the inner frame to allow for wider range of posing possibilities and smoother movements! Both the front and side skirt armor parts are linked together so that the side skirt armor will slide back when the front skirt armor is moved upwards so as to not restrict the Mobile Suit's movements.
In pursuit of easing the assembly process for modelers, Bandai came up with an ingenious method of molding each individual section of the pipe cover in straight rows on the plastic runner so you can easily insert the power pipe through each row of pipe covers and snap each of them off without having to individually cut and slide each piece to the power pipe! That'll shave off at least a few minutes of assembly time!
Its signature weaponry includes a shield, a Heat Saber, a Heat Rod, and a Finger Vulcan for its left hand. A regular manipulator left hand is also included to replace the Finger Vulcan if you so desire. Each section of the Heat Rod is ball-jointed so you can bend it into any shape you want! The blade part of the Heat Saber is made of clear orange, and the Mobile Suit's cockpit can slide open to reveal a sitting-pose pilot figure (molded in light blue). Also packed in the set are in-scale figures (molded in light blue) of Ramba Ral and his aide Crowley Hamon. A sheet of stickers and dry-transfer markings are included.
- From [Mobile Suit Gundam UC Episode 4 gravity well's bottom], Kit Kanon Detector, which made a fierce battle with Zion army remnants at Torrington Base, became the first kit!
- High detailing various parts such as armor and backpack base, according to the scale feeling of RE / 100.
- In addition, the 'assembly ease' which is the feature of the RE / 100 series is also alive.
- The gimmick pose in the play can be precisely reproduced by the movable gimmick of the leg and the waist.
- Three-dimensional gun canon / detector dedicated beam rifle with precise detail, grenade reproduced with trigger.
- The 170mm Cannon gun used by Nemo deployed at Torrington Base is also included, and it can also be equipped with the MG Unicorn series of the same scale.
- accessories
* Special beam . Rifle x 1
* Beam gun x 1
* Beam . Cannon x 2
* 170mm Cannon gun x 1
- Product content
* Molded product x 12
* Seal x 1
* Marking stick x 1
* Instruction manual x 1
1/250 Scale Three Mobile Suits Diorama Set (Falling in Jaburo)
1/250 Scale Three Mobile Suits Diorama Set (Battle of Texas)
- Hello Kitty and Gundam, the second dream collaboration project
- A set of Zaku II and Hello Kitty comes up from the SDCS series
- Easy assembly without adhesive.
- The combined form of Zaku II and Hello Kitty can be reproduced.
- Abundant items for Zaku are included.
- It is possible to have the small apple parts included in the hand of Kitty.
- Kitty can also sit and pose.
- With apple parts and apple-shaped pedestal.
[accessories]
- Set of equipment
- Apple x 1
- Apple pedestal x 1
- Foil seal x 1
- Tetron seal x 1
HG 1/144 RX-78-2 Gundam Clear Color Ver.
Gao Gao Daban High Grade 171 Aile Strike Gunpla Fighter with Back Pack Model Kit for Boys
GaoGao Daban HG 1/144 RX-78-2 Gundam [Beyond Global]
[NO. 4] FG 1/144 RX-78
** Action base is sold separately
Gao Gao Daban Entry Grade Aile Strike Gunpla Fighter with Back Pack Model Kit for Boys
[Includes]:
Gao Gao Daban Entry Grade Strike Gunpla Fighter with Back Pack Model Kit for Boys
EG 1/144 Strike Gundam Ver. QingLong