Accessories: beam rifle, a dedicated base. Simple instruction included in a box.

History:

The Raphael Gundam was first deployed by Tieria Erde during Celestial Being's first attempted contact with the ELS. During this mission, Setsuna F. Seiei used the 00 Raiser Condenser Type and attempted to make contact with the ELS, but his attempt failed and the ELS attacked, with two ELS hitting the 00 Raiser's left arm and beginning to assimilate. However, Tieria arrived in the Raphael to assist, forcibly ripping off the 00 Raiser's left arm and saving the rest of the machine from assimilation, allowing Celestial Being to escape. Raphael's second deployment was during Setsuna's second attempt to communicate, this time using a combination of the Raiser System and Trans-Am to produce a Trans-Am Burst-like effect and expand his quantum field of communications. However, the ELS reacted violently and delivered a crippling mind attack to Setsuna, rendering him comatose and leaving the 00 Raiser open to assimilation. In his desparation to save Setsuna, Tieria quickly revealed the true form of Raphael's backpack, GN-008RE Seravee Gundam II. Using his quantum brainwaves, Tieria used the Seravee to forcibly rip the 00 Raiser's cockpit from the rest of the machine. After handing the cockpit to Lockon Stratos in the GN-010 Gundam Zabanya, Tieria took it upon himself to hold off the ELS long enough for Lockon to escape with Setsuna. However, even with his quantum brainwaves, the Seravee, and Raphael's Trans-Am System activated, Tieria was eventually overwhelmed by the ELS and suffered a mind attack of his own, leaving both the Raphael and the Seravee open to attack. Tieria's physical body, the Raphael and the Seravee were assimilated along with the 00 Raiser, forcing Tieria to return to Veda.

A custom Mobile Suit optimized for use by Quantum Brainwave-capable pilots such as Soma Peries and Louise Halevy, Ahead Smultron is a high mobility-type variant of the A-Laws' mass-production Ahead that sacrifices armor and firepower in favor of speed with its GN Thruster attached to its back. This snap-fit kit of the Mobile Suit comes molded in color and features polycapped joints for great flexibility and dynamic posing. It can be equipped with the included Beam Saber, GN Shield, and a GN Sub-machine Gun that can switch into a GN Beam Rifle. A sheet of foil stickers is provided.

Here's a great new High Grade kit offering: a sharply detailed Tieren Space Type variant Mobile Suit! Molded in color, the blue Mobile Suit is armed with a 200mm x 25 calibur Smooth-Bore gun (space type) that can be mounted on either of its forearms, a 30mm machine gun on the left of its chest, and special equipment attachments that include a carbon wire launcher with bendable carbon wire, carbon net launcher, and gel launcher. Fully articulated with polycap joints, this kit has other movable parts including its mono-eye and nine flexible verniers. A sheet of foil stickers is included for detail. Not a drop of glue or paint required, although painting it would add a more realistic appearance.

• High grade GN-001 Gundam Exia
• Comes with installation manuals
• Scale: 1/144
• snap and fit that does not require any glue.
• Detail wikipedia of GN-001 Gundam Exia can be found here.

GNY-001F Gundam Astrea Type-F History of GNY-001F Gundam Astrea Type-F: The story is that as HRL’s battleship has gotten closer to CB’s Colony Krung Thep, 874 is gathering intelligence using the Sadalsuud, Ruido comes out in the Astrea to intercept. The instruction that came from Veda was “Defeat”. Here, Ruido in the Gundam starts attacking the person. Later on, the second generation Gundam Meister arrived in a transport aircraft on a battlefield. Four HRL MS “Phantom”s against the Gundam Meister 874’s Gundam Astraea fight a one-sided battle that ends in 36 seconds. Ruido in Astraea shoots down the first Helion Platoon that was examining AEU’s Orbital Elevator. In addition, 874 who intercepts in Sadalsuud, who sees the shadow of an approaching aircraft, proposes that Ruido does a check.Ruido sorties in the Astraea in place of the injured Marlene. Ruido does not want Marlene to go out into the battlefield. If he was fighting very well, then there’s no need for her to go out into the battlefield. Ruido exterminates the Helion force through Astraea. Source: http://gundam.wikia.com

- Official Gaiden MS, commercialization decisions Gandamuasutorea! - Official Gaiden Asutorea 00P appeared to reproduce the HG series. - Asutorea] come with basic equipment. - The backpack is also possible to assemble the cone-shaped selection formula. - Accessories: Proto GN Sword, GN Launcher, GN beam rifle, GN beam saber x— 2, Shield

• Here is the evolved MS of the official sub story MS, 1Gundam, taking off! - Scheduled for appearance in the official sub-story 00I. The evolution of 1Gundam, equipped with a new armory binder on the back, has been reproduced as the I's Gundam in HG. 
  
• You can choose to build it as 1Gundam itself. 
  
• The new weapon binder has been equipped with a gimmick to reproduce each weapon modes such as the Cannon mode.
  
• Includes the new weapon common to 1Gundam and 1.5Gundam, the large GN Sword and GN Beam Saber. 
  
• Large GN Rifle is included too, for a very rich weaponry content. 
  
• Accessories: GN Shield, Large GN Beam Rifle, GN Beam Saber x2 (Blade x1), Back Binder
  

- Light gimmick installed! The popular designer color arrives! - Machine designer Takayuki Yanase's illustration image has been reproduced with marking sticker and color mold. - Lights up with a pre-constructed light unit included. - Coin battery CR1120 (sold separately) required.

• The main MS from Mobile Suit Gundam 00 the Movie- Awakening of the Trailblazer has already been chosen for a Master Grade release! 
• Combination gimmick for the sword bits allows for a more accurate reproduction!
• Sword bits can be attached to the GN Sword V to create either the Buster Sword or Buster Rifle modes.
• The Bit A and Bit B combines to form a new weapon. (MG Original Gimmick)
• The pose with the Buster Sword armed looks great! Also comes with the Action Base
• (Black) to display with!
• Uses the GN Shield bits firing form as new mechanism.
• Each lens parts are clear, reproduced vividly. The letters that shows up, and the lines have
• been reproduced with laser processing and foil sticker.
• The GN-Drive at the chest has been reproduced with panel-line mold. The panel-line that
• creates a sense of machinery has been produced specifically for the development of MG.
• Accessories: GN Sword V, GN Shield, GN Sword Bit A/B/C, 1/100 Pilot Figure
• (standing/sitting), Action Base 2

accessories: GN Rifle x 1, GN Shield x 1, Beam Saber x 2

GNR-010 0 Raiser 1/100 Wikipedia: 0 Raiser's design is derived from earlier developments of GNR-001 GN Arms and GNR-000 GN Sefer. The unit is a weapons support/transport-fighter that contains self-detachable components to combine with GN-0000 00 Gundam. The unit uses a large GN Condenser as its main power source and is designed to charge using 00's GN Particles when docked. 0 Raiser is loosely autonomous with the aid of a Haro unit, capable of assisting 00 Gundam in combat and docking sequence; the unit has a cockpit for manual pilot control that's necessary for special system calibrations. As a fighter, the unit itself is a high speed aerial/space combat ship. The unit is highly maneuverable and capable of loading heavy artillery for combat. It can carry additional GN Missiles of all sizes to combat mobile suits, intercept enemy ordinance, and capital ships; even though the unit is capable of independently combating enemy units, its fighter mode wasn't utilized much as it was meant to dock and stabilize the Twin Drive System. In docking mode, docking lasers/sensors are activated to automate the docking sequence. 0 Raiser's tail folds downward and its binders are moved forward to adjust docking with 00's back. The binders extend clamps to attach upon 00 Gundam's GN Drives while the main body attaches to the back of 00 Gundam. When combined they become a single combat unit, 00 (Double O) Raiser, and the Twin Drive System is stabilized for high particle output. Because of the constant need for the power of 00 Raiser, it became the mainstay form and configuration for 0 Raiser. Source:http://gundam.wikia.com

- Accessory: GN twin beam rifle and GN beam saber

P-Bandai: HG 1/144 Advanced GN-X [Deborah Galiena] 
Release Date: April 2019
Estimate Delivery: May 2019

HG Brave Standard and Commander Test Type 2 in 1 Combo Set

Daban 8822 1/100 OOQ 00 Qan[T] Gundam Quanta MB Ver.Brand: DabanCountry of production: China
Package Content

• ABS Plastic model pla plate
• Action Base included
• Water Decal included
• LED light and battery included
• Not included manual book. (Need to download manual )

HG Gundam OO - Flag Series 3 in 1 Combo Set

A modified Ahead for Mr. Bushido from Gundam 00 second season. Discarding most ranged weaponry in favor of close combat, it features 2 GN beam katanas of different lengths and bears a samurai like head.
This snap-fit kit of the custom red machine comes molded in color and features polycapped joints for great flexibility and dynamic posing. -   A sheet of foil stickers is provided.

Accessories:- GN Beam Saber- GN Short Beam Saber- Movable GN Short Beam Cannon- GN Shield

Gao Gao PG 1/60 OO Raiser Gundam

Special Coating : MG 1/100 Dynames Gundam

Daban 1/60 Exia Avalanche/Repair

Limited edition including -  

• PG Exia model kit
• PG Exia use LED
• PG Avalanche parts
• PG Repair parts

• P-Bandai: HG 1/144 Gundam Plutone
• From the Mobile Suit Gundam 00P, appears one of the 2nd generation Gundam! Plutone arrives in the High Grade model kit series, offering variety of color separation and completely new molded parts.
  

RG 1/144 00 Qan[T] Full Saber (Trans-am Clear) The Gundam Base Limited Exclusive Model Kit

Gundam Base Limited RG 1/144 OO Qan(T) Full Saber (Clear Color)