Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

• Comes with a blade antenna head parts - And only wrist was new to the Zaku Bazooka. Wrist Zaku machine gun, heat hawk also supported. Also included rear rack. 
  

By adding several new armor, weapons, and engine modules the engineers of Taskforce Alpha's Pegasus III were able to upgrade the basic MSA-0011 S Gundam into the super powerful Ex-S Gundam. The Ex-S Gundam has almost double the power of the original S Gundam, making it a fearsome unit indeed. The Ex-S Gundam still had three cockpits, but Ryu Roots was the only person who piloted the mobile suit, and due to Ryu's poor piloting skills it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.
With ALICE functioning as the co-pilot of the Ex-S Gundam "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could still take full control of the Ex-S Gundam, or any of its various components or weapons, at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryu were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and "she" was more than capable of compensating for Ryu's lack of skill.

For defensive purposes the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block which could nullify ranged beam attacks made against the mobile suit. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more after burners, additional propellant tanks, and thrusters.

Two new large thruster units were mounted on the Ex-S Gundam's back, giving the unit incredible thrust power and speed. Two large caliber beam cannons were mounted on both of the thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two large hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.

The Ex-S Gundam also had remote weaponry in the form of an incom, which was a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. But the Ex-S Gundam also featured two reflector INCOMs, stored in brackets in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs could not fire their own beams but instead were able to reflect incoming beam fire from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.

Like its predecessor, the Ex-S Gundam was also capable of undergoing a transformation into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam re-combined into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and the Ex-S Gundam would travel in this mode whenever it needed to travel over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in actual combat situations the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser would reach the battlefield and transform into the Ex-S Gundam.

MSM-04 Acguy

SD Gundam EX-Standard (SDEX) is a line of super-deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. To be introduced in late-2015, this is the latest in the long line of super-deformed kits. Each Gunpla has a gimmick wherein their weapons and accessories can be used with their respective High Grade Universal Century counterparts.

• From the anime Mobile Suit Gundam, ace pilot M’Quve’s signature Suit joins the Master Grade lineup! 
  
• Double hip joints allow wide, sweeping range of motion in the hips. 
  
• LED light up gimmick in the sword uses a CR1220 coin battery (sold separately) for dynamic display options! .
  
• Shield features a complex internal structure and can store Hide Bombs (Hide Bombs included for deployed or stored state.)
  
• Includes MQuve figure in 1/100 scale and 1/20 scale.
  
• Accessories: Beam Sword x1, Shield x1
  

MG 1/100 MSM-07 Z'Gok 

• Through the time 35 years, and sends to all Gundam fans! HG is `Shinsei -REVIVE-`
  
  
• Respond to a number of requests, REVIVE START! HGUC cancer Cannon appeared in the latest format!
  
  
• REVIVE1: characteristic proportions
  By with the curve of was released HGUC series first series the gun Cannon] Shinsei `-REVIVE-` sharp in May 1999, the expression characteristic and massive proportions.
  
  
• REVIVE2: can be bold poses
  You can expand the range of movement, elbow, in addition to knee is in double joint, and forward bending of the waist, also, such as heel angle adjustment realized. Anime Geki-chu can be just like the poses.
  
  
• REVIVE3: the ease of set and pursue
  Parts adopt the cut easy wedge gate from the runner. Further consolidate parts for each part, by a runner arranged more easily assembled design.
  
  
• REVIVE4: also included parts enhance
  Other beam rifle of the main equipment, comes with the open hand to be able to fire posture at low attitude (upward) parts.

• MSM-03 Gogg (MG)

• REVIVE 7th is [Mobile Suit Gundam] than `blue giant star` love machine Gouf the line-up of!
  
• FUN TO BUILD
  
• `Adopt a wedge gate`. Easily removed from the runner, since the gate mark is hard to rest, clean finish!
  
• BEST PROPOTION
  
• REVIVE the Gouf contemporary proportions! Can reproduce a wide variety of action poses a wide range of motion.
  
• OPTION
  
• The main armament of Gouf also abundantly included!
  
• Heat rod can be bent freely, a variety of poses is to be able to!
  
• Heat saber can be stored in the shield.
  
• Accessories: shield, heat rod, heat saber (left and right), grip hand (left and right), Weapons Possession (left and right), 75mm machine gun smack
  

[READY STOCK] 


To commemorate the 40th anniversary of Gunpla, [Zeong] from [Mobile Suit Gundam] has been converted to RG with the latest technology and design!

-In order to reproduce the mechanism on the setting and the pose in the play, the original gimmick based on the actual machine verification is condensed to 1/144.
-Built-in [Advanced MS Joint]. Achieves both smooth and powerful expression and detailed details.
The mono eye can be moved to the left and right according to the movement of the neck. It can also be moved up and down manually.
-Built-in frame with a wide range of movement at the waist. Allows for more dynamic poses.

Four vernier on the chest and back are deployed in conjunction with the front-back movement of the chest.
-Each large and small vernier can be moved greatly individually by expanding the skirt part.
-The hand parts are insert-molded to reproduce precise details and movable joints.
-Reproduce the arm wired mega particle cannon by removing the forearm and attaching the lead wire.

[accessories]
* Display base x 1
* Lead wire (red) x 1* Lead wire (black) x 2* Realistic decal x 1

GaoGao Daban HG 1/144 RX-78-2 Gundam [Beyond Global]

Chiba Model RX-121 Gundam TR-1 [Hazel Custom] PB Limited Plastic Model Kit

Brand: Chiba Model (??) - Chinese 3rd-party brand
Subject: RX-121 Gundam TR-1 [Hazel Custom] 
Grade: HG (High Grade)
Scale: 1/144
Edition: PB Limited (Premium Bandai-style limited release)
Type: Plastic Assembly Model Kit

Includes:

- RX-121 Gundam TR-1 [Hazel Custom] 
- Assembly instructions

Note: Snap-fit assembly model kit from Chinese 3rd-party manufacturer Chiba Model. Some assembly required. Cement and paint not included.