Price Clear







Showing Gundam Model Kits + MOBILE SUIT GUNDAM product(s)

Showing 211 - 240 of 369 products

img
SAVERM77.40

RE/100 MS-08TX [EXAM] Efreet Custom

  • The Efreet Custom, long popular in games and side stories, is finally a kit! 
  • Its charm is emphasized by the RE/100 series’ refined construction, detailed exteriors, and easy but flexible assembly. 
  • Translucent parts are used for its backpack-stowable heat saber. 
  • Its hexa-linked missile pod is mounted on a polycap-shaft joint for removability and adjustability!

RM132.30
img
SAVERM35.90

[023] HGUC 1/144 MSA-0011 S-Gundam

The MSA-0011[Ext] Ex-S Gundam (aka Extraordinary-Superior Gundam) is an upgraded version of the MSA-0011 S Gundam that appears in Gundam Sentinel. The mobile suit is piloted by Ryu Roots.


By adding several new armor, weapons, and engine modules the engineers of Taskforce Alpha's Pegasus III were able to upgrade the basic MSA-0011 S Gundam into the super powerful Ex-S Gundam. The Ex-S Gundam has almost double the power of the original S Gundam, making it a fearsome unit indeed. The Ex-S Gundam still had three cockpits, but Ryu Roots was the only person who piloted the mobile suit, and due to Ryu's poor piloting skills it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.
With ALICE functioning as the co-pilot of the Ex-S Gundam "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could still take full control of the Ex-S Gundam, or any of its various components or weapons, at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryu were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and "she" was more than capable of compensating for Ryu's lack of skill.

For defensive purposes the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block which could nullify ranged beam attacks made against the mobile suit. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more after burners, additional propellant tanks, and thrusters.

Two new large thruster units were mounted on the Ex-S Gundam's back, giving the unit incredible thrust power and speed. Two large caliber beam cannons were mounted on both of the thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two large hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.

The Ex-S Gundam also had remote weaponry in the form of an incom, which was a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. But the Ex-S Gundam also featured two reflector INCOMs, stored in brackets in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs could not fire their own beams but instead were able to reflect incoming beam fire from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.

Like its predecessor, the Ex-S Gundam was also capable of undergoing a transformation into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam re-combined into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and the Ex-S Gundam would travel in this mode whenever it needed to travel over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in actual combat situations the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser would reach the battlefield and transform into the Ex-S Gundam.

Accessories:
  • Vulcan Gun
  • Beam Cannon
  • Beam Saber
  • INCOM
  • Reflector INCOM
  • Beam Smart Gun

RM72.00
img
SAVERM39.90

Bandai NG 1/60 RX-78-2 Gundam

Bandai NG 1/60 RX-78-2 Gundam

RM80.00
img
SAVERM25.40

Bandai NG 1/60 MS-06S Char's Zaku

Bandai NG 1/60 MS-06S Char's Zaku

RM94.50
img
SAVERM29.90

[008] HGUC 1/144 MSM-03 Gogg

An aquatic mobile suit used by Zeon from Mobile Suit Gundam with its trade mark sharp claws. Arms can detach to recreate appearance while cruising through the ocean waters.

RM42.00
img
SAVERM24.90

[020] HGUC 1/144 RGM-79 GM

[020] HGUC 1/144 RGM-79 GM

RM35.00
img
SAVERM19.90

[021] HGUC 1/144 RX-78-2 Gundam

The HGUC  1/144 RX-78-2

- Core Fighter of shape importance is attached
- Weapons beam rifle x 1
- hyper bazooka x 1
- Shield x 1
- beam saber x 2 is attached

RM40.00
img
SAVERM44.90

[022] HGUC 1/144 MSN-02 Zeong

This plastic model kit of the big mech has moveable everything, including the fingers! The thruster assemblies pivot. Head detaches, and hands detach and can be mounted on bendable cables (included). As usual the parts are pre-colored and snap together. While paint is not required for this model, it certainly would add a realistic appearance to the final product. Instructions are in Japanese but extremely well illustrated so anyone can follow them.


RM63.00
img
SAVERM54.80

[035] HGUC 1/144 RX-178+FXA-05D Super Gundam

- Coalescence of deformable Gundam Mk-II.

- Flight mode can be replicated only G-Defensor.
- Reproduce the transformation gimmick of the street setting.

( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 31 x 19 x 8 cm / 421g

RM77.00
img
SAVERM40.00

Daban 6606 MG 1/100 MSA-0011(Ext) Ex-S Gundam

Daban 1/100 MSA-0011(Ext) Ex-S Gundam (MG)


Series : Gundam Sentinel
Grade : Master Grade (MG)
Manufacturer : Daban
Scale : 1/100
Code : 6606

Please note that this is NOT-Bandai product

RM160.00
img
SAVERM53.90

MG 1/100 RX-78-2 Gundam Ver.1.0

  • Bandai's Master Grade (MG) Gundam RX-78-2 is meant to attract the mature modeler who remembers growing up with Gundam, but wouldn't think of building the primitive kits that were released when Gundam first was broadcast in 1980! 
  • Like all the kits in the MG Gundam series, the level of detail is superb and virtually everything moves. 
  • The panels on the Gundam RX-78-2's legs flip open to reveal internal mechanisms. The head has a panel, too. 
  • Even the "Core Fighter" cockpit ship can be removed from the Gundam RX-78-2's mid-section. 
  • Fine mesh parts cover the inside of the chest air intakes for added realism. 
  • Three types of hands are included -- open palm, fists, and posable (moving fingers) for gripping any of the several weapons that comes with the kit.

RM95.00
img
SAVERM54.90

MG 1/100 MS-14S Gelgoog (One Year War 0079 Ver.)

  • Gelgoog One Year War EDITION!!
  • Accesories: Beam Rifle x1, Beam Naginata x1, Shield x1
  • Item Size/Weight : 33.3 x 24.2 x 12.4 cm / 678g

RM125.00
img
SAVERM73.20

Bandai Gundam EX-18 Mobile Ship Argama Scale 1/1700

Bandai Gundam EX-18 Mobile Ship Argama Scale 1/1700

RM136.50
img
SAVERM86.90

MG 1/100 MS-14A Gelgoog Ver.2.0

  • The successor to the powerful and ubiquitous Zaku line, the Gelgoog is the next step in mass-produced Mobile Suits! 
  • Designed with perfectly balanced offensive and defensive capabilities, this is the first mass-produced Zeon Suit to feature beam weaponry, increasing its overall combat performance. 

  • Accessories: Beam Rifle x1, Under Barrel Grenade Launcher x1, Rifle Bipod x1, Beam Naginata x1, 1/100 Pilot Figure x2 (Sitting, Standing), Antenna x2, Shield x1

RM182.00
img
SAVERM79.90

MG 1/100 MS-09R Rick Dom

  • This item is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.
  • Following on the heels of the Dom kit comes Bandai's Master Grade Rick-Dom. Differences with the first release are a different tail and backpack unit, different soles (of the feet), and new weapons, especially that huge beam bazooka. And of course, all the Master Grade goodies you'd expect are here! 
  • Fully posable at all joints; extensive internal detail; individually posable finger joints and more. 
  • Like all Master Grade releases, the kit is molded in color, and features snap assembly. Have fun!

RM160.00
img
SAVERM199.90

MG 1/100 Shin Musha Gundam (Sengoku No Jin)

  • From the popular game series Dynasty Warriors Gundam, the Hajime Katoki-designed Musha Gundam is realized as a Master Grade kit! 
  • Utilizing the frame created for the Rx-78-2 Ver. OYW and clever parts separation, along with gimmicks for moving armor sections all add up one impressive Suit! 
  • Various weapons included, all of which can be mounted on the Suit for quick storage- the sword at the hip, and the other weapons mounted on the backpack. 
  • [Artillery Tanegashima] (rifle), [Tachi sun circle] (sword), comes equipped with a [spear diffuse round],
  • [Halberd lightning round] is attached. To the left hip armor the sword, spear, artillery, (each equipped with halberd armed to
  • It can be equipped with a backpack. )
  • Accessories: Nichirinmaru , Tanegashima Gun, Sankoumaru Jumonji Yari, Denkoumaru Naginata, Folding Screen, Spear Stand x2, Gun/Sword Stand

RM280.00
img
SAVERM63.90

MG 1/100 RX-78-2 Gundam Ver. O.Y.W. 0079

  • This is RX-78-2 as it appeared in the PS2 "Mobile Suit Gundam: The One Year War" game. 
  • With Bandai's superbly flexible inner frame, over which sharply molded armor is placed, the final product can bend and pose in just about any position you might imagine. 
  • Parts are all molded in color and snap together; polycaps make the joints move smoothly. Bolts hold the frame together securely. Dry-transfer decals allow you to add exterior markings with precision.

RM128.00
img
SAVERM40.40

P-Bandai Exclusive: RG 1/144 RX-78/C.A. Casval Gundam

  • RX-78/C.A. Casval Gundam finally appear in Real Grade model kits.
  • Comes with armor: beam rifle / Hyper Bazooka / beam saber / shield.
  • Suitable for age 15 and above / no abrasive is needed during assemble process.

RM179.60
img
SAVERM79.90

MG 1/100 MS-09 Dom

This item is a posable, Master-Grade injection-plastic kit of an item from the Gundam universe.  
Bandai's Master Grade Dom is here! Whereas some of the kits in the Master Grade series have their overall appearance changed somewhat from the original Gundam animation, the Dom is quite true-to-form, retaining the short, stocky proportions of the original. But all the Master Grade goodies you'd expect are here! Fully-posable at all joints; extensive internal detail; individually-posable finger joints; numerous weapons, including the laser sword, machine gun, two bazookas and Panzerfausts. Most of these mount right on the Dom's back or hips for firing and/or storage. Of course, the kit is also molded in color, and features snap assembly. Have fun!

RM160.00
img
SAVERM49.90

HGUC 1/144 GUNDAM OPERATION V SET

  • Special Edition manual and special marking seal that can dress up the three aircraft of the V strategy.
  • A Set of 3 Gundam Gun Cannon Guntank of HGUC which includes RX-78, RX-77, RX-75

RM106.00
img
SAVERM97.10

RE/100 Gundam GP04 Gerbera


  • The distinctive Strum Boosters on the back are reproduced. 
  • Three boosters are detachable. Upper two boosters can be connected to the Saber Rack. 
  • The Landing Skid of the lower booster can be retracted or lowered with replacement parts. When lowered, the Landing Skid can be used to physically support the Gundam in a standing position. 
  • An abundance of weapons such as a Long Range Rifle, Beam Rifle and Shield are included. 
  • Runner x10, Foil sticker x1, Tetron sticker x1, Instruction manual x1

RM136.50
img
SAVERM54.86

P-Bandai Exclusive: HGUC 1/144 Crossbone Gundam X2 Kai

From "Mobile Suit Crossbone Gundam", Space Pirate Crossbone Gundam X2 breaks that have been restored appeared in HGUC series!

From "Mobile Suit Crossbone Gundam", to commercialize Crossbone Gundam X2 modified with HGUC series.
Crossbone Gundam X2 breaks distinctive body shape and to reproduce the armed!

● X2 reproduce breaks specific body shape!
And head and blade antenna shape is different from the X1, the part of the back thrusters reproduced in the new shape.

-Head and blade antenna
Reproduce some form of head in the new shape.
Of angle of change shape at the top, blade antenna with features. Aspect design is also reproduced in the mold.

Hive thrusters
The shape of the thrusters tip is to have been large in size and reproduced in the new parts.

● Buster launcher included!
detail a dedicated large weapon Buster launcher of the Crossbone Gundam X2 breaks to be used is also included in the rich new shape.
Total length of about 150mm.

● scissor anchor other, rich comes armed. Weapon dedicated hand parts also enhance.

Comes armed: Buster Launcher / scissor anchor / heat Dagger / beam saber /
Than Buster (beam Zanba / Buster cancer) / brand marker / beam shield

RM155.00
img
SAVERM69.86

MG 1/100 RGM-79 GM Ver.2.0

A GM based on the 2.0 RX-78 frame, it features new additional detail on its internal skeletal structure and ability to choose between classic GM front skirt armor or its more contemporary appearance. Includes beam spray gun, beam saber, bazooka, shield.

RM140.00
img
SAVERM99.81

P-Bandai Exclusive: RG 1/144 Zgok (Mass Production)

P-Bandai Exclusive: RG 1/144 Zgok (Mass Production)

RM188.00
img
SAVERM29.90

[197] HG REVIVE 1/144 Gyan

  • Accessories: dedicated beam saber, dedicated shield

RM42.00

Showing 211 - 240 of 369 products

Contact Us