• X-Wing Fighter Resistance specification 1/72 scale that appeared during the "awakening of Star Wars / Force" drama.
• Possible desorption of BB-8 to support adjustment and pilot of the aircraft.
  
• Airframe side of the line is to reproduce the color-coded in the molding color, other fine line using the water transfer type decals and marking seal.
  
• Canopy and those of the all-clear material, two is supplied only frame.
  
• to reproduce the detail over the details by verifying the thorough article condensation in the 1/72 scale.
  
• Distinctive wings reproduce the opening and closing of the same in the play.
  
• Chakuyukaashi comes the landing gear to reproduce the implantation and maintenance state.
  
• Laser cannon can reproduce the figure decided to attack by inserting the laser effect to the wing tip.
  
• Display base desert motif of Jakhu of aircraft. Based multiple connection possible with the joint parts.
  
• The same scale of the pilot (seated type upright type) and BB-8 is included.
• [Accessories] dedicated display case x 1, pilot figures x 2 (seated x 1, upright x 1), BB-8 x 1, x 2 canopy species (Clear parts x 1, frame parts x 1), effect parts x 2 , Chakuyukaashi x set
  
• [Commodity content] moldings x 4, water transfer type decal x 1, marking seal x 1, assembly instructions x 1
  

Release Date: Nov 2014

To detail reproduced in 1:72 scale Thai Advanced x1 Darth Vader was boarding in [episode 4].

Set include : Death Star surface base × 1, Laser effects × 2, Darth Vader figure × 2 (seated upright × 1 · × 1), (Clear parts × 1 · frame parts × 1) 2 kinds of view boat ×

Full length: approx 85mm.

This is pre-painted plastic model kits and require snap-fit assembly only..

• At the Star Wars [Strikes Back Episode 5 / empire], three-dimensional in 1/48 scale Snowspeeder hero Luke Skywalker was boarding!
  
• Condensed the details of detail in the 1/48 scale from the verification of thorough Prop (imaging model).
  
• The replacement of parts, to reproduce the opening and closing state of air brake.
  
• Snow Speeder can be reproduced to fire a laser gun with a laser effect.
  
• Seating type figure of the same scale is two bodies included. Snowfield in the AT-AT a defeated power Harpoon (harpoon) parts of the host is also included.
  
• Supplied base image the snowy field host. Based multiple connection is possible with the joint parts.
  

Accessories: Dedicated display base, laser effect parts x 2,1 / 48 figure x 2 species (pilot, gunner), canopy x 2 species (frame & clear parts, clear parts), Power Harpoon (harpoon) parts, air brake opening and closing reproduction parts four x 2

[Star Wars] 1/72 Y-Wing Starfighter

• Accessories: Death Star surface-based, laser effect parts, the same scale pilot figure x 3 (upright x 1, seated x 2 types), the same scale astromech droid x 2 species, canopy x 2 species (frame parts, clear parts ), Chakuyukaashi
  

[Star Wars] 1/144 Slave I

• Accessories: (road part of the selection formula) dedicated display-based, laser effect parts ? 2, Boba Fett figure ? 2 (upright-seated), carbonite frozen Han Solo figure, hangar hatch opening and closing reproduction parts two ? 2, apron / flight state reproduction for both wings cylinder parts two ? 2
  

• This product is only sold in Japan currently.
• Not many units available ~ hurry while stock lasts.
  
• 3xAA battery required and sold separately.
• [STAR WARS] 1/48 X-WING STARFIGHTER MOVING EDITION
  

The Millennium Falcon was a Corellian YT-1300 light freighter used by the smugglers Han Solo and Chewbacca during the Galactic Civil War. It was previously owned by Lando Calrissian, who lost it to Solo in a game of sabacc.

Its aged appearance belied numerous advanced modifications to boost the ship's speed, weapons and shield, including a hyperdrive engine among the fastest in the entire galaxy, enabling it to outrunImperial Star Destroyers. It also included sensor-proof smuggling compartments, which were used during the rescue of Princess Leia Organa to evade Imperial stormtroopers. Afterwards, the Millennium Falcon saw further action when Solo chose to join the Rebels during the Battle of Yavin, where it was able to sneak up on Darth Vader'sTIE Advanced.

After Han was captured on Bespin, Lando took command of theFalcon once more to search for him, and later flew the ship at theBattle of Endor, where it entered the Death Star II and destroyed it from within. During this battle, the starship's circular sensor dish was knocked off as Calrissian piloted it through the Death Star's interior.

In addition to its renowned hyperdrive, which made the Falconboasted as the "fastest ship in the galaxy," the ship was equipped with a backup hyperdrive. Compared to the primary engine, it was much slower and often took several weeks or months to reach the nearest star system. It also had a dejarik table featuring creatures found throughout the galaxy.

At some point over the following thirty years, the sensor dish was replaced with a rectangular model.

From "Star Wars: the force Awakens", the first order special forces tie fighter is making its way to the band a I Star Wars plastic BAN203219 lineup!
Utilizing CG prop modeling, every small detail in this 1/72 scale BAN203219 are reproduced accurately to scale.
Two view ports are included, one clear, and one utilizing the cockpit frame. Use the included laser effect parts with moveable turrets and the display base resembling the Jake desert to recreate your favorite scenes! set includes dedicated display base, laser effect parts, two viewports (clear and frame), and two 1/72 pilots (seated). water-transfer decal x1. Marking sticker x1. Instruction manual x1.

[Star Wars] 1/72 Modelkit A-Wing Starfighter

[Star Wars] Vehicle Model Series 003  Poe's X-Wing fighter

• (3 in 1) Star Wars Vehicle Model 001,002 and 003 (Star Destroyer, X-wing,Poe X-wing)
  
• Package inclues:
  
• 1 x [Star Wars] Vehicle Model Series 001 Star Destroyer
  
• 1 x [Star Wars] Vehicle Model Series 002 X-Wing Starfighter
  
• 1 x [Star Wars] Vehicle Model Series 003  Poe's X-Wing fighter
  

[Star Wars] 1/72 Tie Interceptor 

[Star Wars] Vehicle Model 004 First Order Tie Fighter Set

Codenamed Black One, and made famous by Poe Dameron in the Star Wars movie, The Force Awakens, the T-70 X-wing fighter was the successor to the T-65B X-wing starfighter, manufactured by Incom-FreiTek for use by the New Republic Starfleet.
More expensive and complex than the former T-65B, the T-70 featured advanced weaponry and proved more versatile than its predecessor, and was essential in both dogfights and capital-ship scale combat operations.
Utilizing Bandai's trademark color injection molding techniques, Poe's X-Wing Fighter is faithfully reproduced in 1/72 scale.

This X-Wing features opening and closing S-foils laser effect parts that can attach to the wings, a cockpit with 2 different canopy options, and display stand.

Set includes Dedicated display base (x1), seated Pilot （x1）, BB-8 (×1), RO-H2 (×1), Laser effect part (x2), Landing gears (x1), set Canopy（frame only x1 / clear part x1）. Water-transfer decal (x1), Marking sticker (x1).

[Star Wars] Vehicle Model 006 Millennium Falcon

[Star Wars] Vehicle Model 007 Tie Advanced x1 & Fighter Set

[Star Wars] 1/144 U-Wing & Tie Striker

[Star Wars] 1/48 & 1/144 Snowspeeder

From Star Wars: Episode V - the empire strikes back, comes the AT-AT in 1/144 scale! the 4 legged mobile transport has stunning details even down to the side paneling.
Recreate the memorable attack at the battle of Hoth scene with multiple kits!  legs feature individually movable joints that can even bend low enough to recreate the massive behemoth being defeated,  side panels can also be removed. A nipper or sprue cutter (sold separately) is required for assembly, but does not require glue. Also includes seated pilot, part swappable landing gear options, water slide and sticker transfer options. 

Set includes snow themed dedicated display base, laser effect parts x2, leg Dampers,1/144 pilot x2, articulated head and legs, and laser gun x2.

* The Jedi Starfighter as seen in "Star Wars Episode II: Attack of the Clones" joins the Vehicle Model series!

PRECISE DETAIL
* Highly detailed molding in a palm-sized scale.

ACCURATE FEATURES
* Hyperdrive Docking Ring is detachable!

RE-CREATE SCENES
* Display alongside the "1/144 Slave I Jango Fett Ver.” (sold separately) to replicate key scenes from the film!

[ INCLUDED ACCESSORIES ]
* Dedicated display base x 1

[ CONTENTS ]
* Sprue x 4
* Marking sticker x 1
* Instruction manual (printed on package)

From "Star Wars Episode 2: Attack of the Clones", comes the infamous bounty hunter Jango Fett's Slave I!  Reproduce the shape of the Slave I through new parts for the cockpit and exterior. Set includes dedicated display base, display base part, cockpit hatch parts (open and close), and flight/parked cylinder parts. 

[Star Wars] Vehicle Model Series 010 - A-Wing Starfighter

The upgraded version of Poe Dameron’s X-Wing with boosted accelerator pod as seen in “Star Wars: The Last Jedi.”

Resistance engineers have retrofitted a new device for Poe to give an extra edge in combat, allowing Poe much needed speed to outmaneuver the First Order. Utilizing Bandai's trademark color injection molding techniques, the 1/72 X-Wing features opening and closing S-foils, laser effect parts that can attach to the wings, a cockpit with 2 different canopy options, and 2 display stands. A nipper or sprue cutter (sold separately) is required to remove parts from runners, but does not require glue to assemble.

Set includes 2 types of Dedicated display base stands (1 Aqua Clear and 1 Black), Pilot x1, BB-8 x1, RO-H2 x1, Laser effect part x 2, Landing gears x 1, 2 types of canopies (frame and clear version). Parts for the original version from “Star Wars: The Force Awakens” are also included. Water-transfer decal x 1 Marking sticker x 1.

Product Details

• Size: Wingspan Approx 6 inches, Body 6.7 inches when built