• Home
  • Showing Gundam Parts + WATER DECALS / STICKERS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 331 - 360 of 417 products

Quick View
img
SAVERM8.09

1/144 Scale Earth Federation Decal Sheet

  • Gundam decal sheet recommended for use on HGUC Gundam RX78-2, Guncannon and Guntank kits.

RM3.90
RM3.90 Request Stock
Quick View
img
SAVERM7.50

Tamiya 87135 Mark Fit (Strong) Decal Solution 40ml Bottle

【 Perfect Decal Application 】　 　


Mark Fit enables perfect decal applications. It softens decals so they can easily fit to uneven, rounded, and matt finish surfaces of plastic models while increasing adhesion. The bottle's cap comes with a convenient brush. 1 bottle contains 40ml.

≪How to use≫
1. Apply Mark Fit to the model where decal is applied.
2. Place decal on the model.
3. Position decal by an wetting finger.
4. Press decal down gently with a soft cloth or cotton swab until excess water is gone.
5. Apply Mark Fit over the decal, then press down gently with a soft cloth or cotton swab.
6. Allow the decal to completely dry.

RM17.50
RM17.50 Request Stock
Quick View
img
SAVERM8.00

[WATER DECAL] MG Astray Red Frame Kai

  • water decal for gundam astray red frame gundam kai scale 1/100
  • not pre-cut like the bandai slide water decal.

RM9.90
RM9.90 Request Stock
Quick View
img
SAVERM10.10

[Da Lin] Water Decal The Witch from Mercury HG 1/144 Aerial Gundam

[Da Lin] Water Decal HG 1/144 Aerial Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker.

- For model kit HG 1/144 Aerial 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Request Stock
Quick View
img
SAVERM8.90

Tamiya 87102 Mark Fit Decal Solution 40ml Bottle

" Perfect Decal Application "


Mark Fit enables perfect decal applications. It softens decals so they can easily fit to uneven, rounded, and matt finish surfaces of plastic models while increasing adhesion. The bottle's cap comes with a convenient brush. 1 bottle contains 40ml.

-  How to use -
1. Apply Mark Fit to the model where decal is applied.
2. Place decal on the model.
3. Position decal by an wetting finger.
4. Press decal down gently with a soft cloth or cotton swab until excess water is gone.
5. Apply Mark Fit over the decal, then press down gently with a soft cloth or cotton swab.
6. Allow the decal to completely dry.

RM17.00
RM17.00 Request Stock
Quick View
img
SAVERM5.80

[WATER DECAL] MG Strike Freedom

  • water decal for 1/100 strike freedom gundam
  • not pre-cut like the bandai slide water decal.

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM3.90

[Water Decal] HG Astray Red Frame Kai

  • water decal for gundam astray red frame gundam kai scale 1/144
  • not pre-cut like the bandai slide water decal.
  • extra touch of details for modeling kits.

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM5.80

[Water Decal] RG Gundam 00 Raiser

  • water decal for 00 RAISER model kit scale 1/144.
  • not pre-cut like the bandai slide water decal.

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM5.80

[Water Decal] RG ZGMF-X20A STRIKE FREEDOM Model Kit

  • Third Party Water decal for RG Strike Freedom model kit scale 1/144.

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM5.80

[Water Decal] RG WING ZERO EW Model Kit

  • water decal for RG Wing Zero EW model kit scale 1/144.
  • not pre-cut like the bandai slide water decal.
  • It's recommended to use this tool when working on decalling: Cutting Matt, Tweezer, Empty swallow bottle with water, hobby k-nife, softening solution.
  • Apply a clear gloss surface before applying decal would be a good choice.

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM11.00

PG Strike Freedom model kit gold color decal

  • Gold color decal for PG Strike Freedom Gundam Model kit.
  • Not pre-cut like the bandai slide water decal.
  • Extra touch of details for modeling kit

RM18.90
RM18.90 Request Stock
Quick View
img
SAVERM5.89

[Water Decal] MG ZGMF-X42S Destiny Gundam Water Decal

- Water decal for HG / MG warning sign water decal - RED color
- Not pre-cut like the bandai slide water decal
- Extra touch of details for modeling kit

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM5.89

[WATER DECAL] MG PMX-003 The-o

[WATER DECAL] MG PMX-003 The-o

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM15.48

[Water Decal] Z260 MG Duel Assault Gundam GAT-X102 Water Decal

- Water decal for MG Duel Assault Gundam 
- Not pre-cut like the bandai slide water decal.
- Extra touch of detail for modeling kits

RM14.50
RM14.50 Request Stock
Quick View
img
SAVERM5.89

[Water Decal] HG RX-0 Unicorn Water Decal

  • Water decal for HG RX-0 Unicorn water decal
  • not pre-cut like the bandai slide water decal.
  • extra touch of detail for modeling kits

RM12.10
RM12.10 Request Stock
Quick View
img
SAVERM14.88

[Water Decal] RG RX-178 MK-II MK2 AEUG Gundam

Water slide decals to be used with various model kits. Contains markings that can be used with its specific character or at your discretion for customizing your own kits!

RM9.10
RM9.10 Request Stock
Quick View
img
SAVERM17.18

MG 00 Raiser Gundam Silver Decal

  • silver color decal for MG 00 Raiser Gundam

RM18.80
RM18.80 Request Stock
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for U.C. 0096: Last Sun Series

[Da Lin] Water Decal for U.C. 0096: Last Sun Series


This is a High Quality Water Decal by Dalin and not a sticker. 
- Water Decal for U.C. 0096: Last Sun Series
- Not pre-cut like the Bandai slide water decal
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Request Stock
Quick View
img
SAVERM11.00

Bandai Water Decal #129 for HG 1/144 Nightingale

Decals the marking of HG 1/144 Nightinggale Gundam model kits
Brand : Bandai
  • Cut out desired decal.
  • Dip decal and backing in water. Leave submerged 10-30 seconds.
  • Remove decal from water with tweezers.
  • Gently lift decal off of paper backing with tweezers.
  • Place decal in desired location on model, adjusting with cotton swab if necessary.
  • Apply Mark Setter or Mark Softer as needed.

RM18.90
RM18.90 Request Stock
Quick View
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 Sinanju Stein (Narrative Ver.) Gundam

[Da Lin] Water Decal HG 1/144 Sinanju Stein (Narrative Ver.)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Sinanju Stein (Narrative Ver.)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Request Stock
Quick View
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 Qubeley Gundam

[Da Lin] Water Decal HG 1/144 Quebeley

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Quebeley
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Request Stock
Quick View
img
SAVERM6.10

[Water Decal][Bandai] Gundam Decal RG 1/144 RX-78-2 Gundam #84

[Bandai] Water Decal for RG 1/144 RX-78-2 Gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit RG 1/144 RX-78-2
- Best use with Mr Hobby Mr. Mark Setter
- Extra touch of detail for modeling kits

RM17.90
RM17.90 Request Stock
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for Gundam Machine Nest Domain Base Universe Use B

[Da Lin] Water Decal for Gundam Machine Nest Domain Base Universe Use B

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit Gundam Machine Nest Domain Base Universe Use B
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Request Stock
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for Gundam Machine Nest Domain Base Universe Use A

[Da Lin] Water Decal for Gundam Machine Nest Domain Base Universe Use A

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit Gundam Machine Nest Domain Base Universe Use A
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Request Stock
Quick View
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 HGIBO Kimaris Vidar Gundam

[Da Lin] Water Decal HG 1/144 IBO Kimaris Vider Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 IBO Kimaris Vider Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Request Stock
Quick View
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 HGIBO Helmwige Reincar

[Da Lin] Water Decal HGIBO 1/144 Helmwige Reincar

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HGIBO 1/144 Helmwige Reincar
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Request Stock
Quick View
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 Red and Blue MSM-07 Z'Gok (2 Set)

[Da Lin] Water Decal HG 1/144 Red and Blue MSM-07 Z\'Gok (2 Set)

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Red and Blue MSM-07 Z\'Gok (2 Set)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Request Stock
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Forbidden Gundam

[Da Lin] Water Decal for HG 1/144 Forbidden Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Forbidden Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Request Stock
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Raider Gundam

[Da Lin] Water Decal for HG 1/144 Raider Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Raider Gundam 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Request Stock
Quick View
img
SAVERM10.10

[Da Lin] Water Decal for HG 1/144 Dual Blitz Gundam

[Da Lin] Water Decal for HG 1/144 Dual Blitz Gundam

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 Dual Blitz Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Request Stock

Showing 331 - 360 of 417 products