• Home
  • Showing Gundam Parts + WATER DECALS / STICKERS product(s)

PRODUCTS

Price Clear







Brand

Availability

Showing Gundam Parts + WATER DECALS / STICKERS product(s)

Showing 211 - 240 of 417 products

Quick View
img
SAVERM8.90

Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam

- Water Decal for MG 1/100 Blue Frame 2nd Revise Gundam
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM13.80

Mr Hobby Mr. Mark Softer

This is a softening agent for slide marks. It has the effect of closely adhering slidemarks to curved surfaces.

  • First, apply a quick drop to the area where the decal will go using the brush attached to the cap.
  • Apply decal over it.
  • Apply gentle pressure to the decal with a soft cloth, removing any excessive liquid and sticking the decal down fast.
  • The decal will stick perfectly, even on uneven or curved surfaces.
  • If air gets in between the decal and the model surface, after drying delicately prick the decal with a needle and insert Mr.MARK SOFTER through the resulting hole. The air will escape, and the decal will stick down firmly.
  • Capacity: 40ML

RM15.10
RM15.10 Add to cart
Quick View
img
SAVERM11.00

Mr Hobby Mr. Mark Setter 40ML

  • Apply the mark setter to the position where decal is to be stuck.
  • Stick a slide mark
  • Spread it evenly and remove water with a swab, etc.
  • Apply the mark softer on it, remove water again.

In the past, Mr. MARK SOFTER was used simply to soften decals. 

However, now, using Mr. MARK SOFTER together with Mr. MARK SETTER (which gives decals greater adhesiveness) makes it much easier to affix decals to plastic models. 

First, the area to which the decal will be affixed is painted and the decal is applied. 

After air bubbles are removed by pressing on the decal with a cotton swab, a coating of Mr. MARK SOFTER is applied and allowed to dry. 

Because the decal now has greater adhesiveness, adhesive silvering (the floating and shiny quality of the clear parts of decals) can be firmly affixed to uneven surfaces. 

It is perfect even for poorly made decals from Eastern European models. 

Decals have better adhesiveness if the painted surface is prepared to have a glossy appearance, and they gain an appearance that suggests they were drawn by hand.

RM17.90
RM17.90 Add to cart
Quick View
img
SAVERM8.90

Water Decal for HG 1/144 Gundam Heavyarms EW

- Water Decal for HG 1/144 Gundam Heavyarms EW
- Not pre-cut
- Best use with Mr. Hobby Mr. Mark Setter / Softer
- 11 cm x 15 cm

Tools:

* Decals
* Mr. Mark Setter (optional)
* Mr. Mark Softer (optional)
* Water
* Cotton buds
* Tweezers
* Paper towel
* Pen Knife

Instructions :
1. Again, cut out the design you want from the decal sheet
2. Using a pair of tweezers/forceps, pick up the decal you cut out and dip in water for roughly 8 seconds. I found that Bandai water-slide decals need less time, maybe 4-6 seconds while custom decals might take longer than 8 seconds. The purpose of this step is to detach the decal from the decal sheet.
3. Using a cotton bud dipped in water, gently ‘tease’ the decal away from the decal sheet and onto your gunpla. If the decal won’t budge from the decal sheet, dip in water for a couple more seconds.
4. Once the decal is on your gunla, you can still adjust or reposition the decal. Once you’re satisfied with the position, use the dry end of the cotton bud to gently roll over decal to absorb extra water.


Water slide decals are activated by water. So it's important to store them away from liquid. 

RM9.00
RM9.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Strike Freedom Gundam

[Da Lin] Water Decal for RG 1/144 Strike Freedom Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Strike Freedom Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Johnny Ridden Zaku II High Mobility Type

[Da Lin] RG Johnny Ridden Zaku II High Mobility Type Water Decal (RG21)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for Johnny Ridden Zaku II High Mobility Type 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Exia Gundam + Repair II

[Da Lin] Water Decal for RG 1/144 Exia Gundam + Repair II


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Exia Gundam + Repair II
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 GP01 Gundam + Full Burnern

[Da Lin] RG GP01 Gundam + Full Burnern Water Decal (RG17)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG GP01 Gundam + Full Burnern 
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Wing Gundam Zero Custom EW

[Da Lin] Water Decal for RG 1/144 Wing Gundam Zero Custom EW


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Wing Gundam Zero Custom EW
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Tallgeese I

[Da Lin] Water Decal for RG 1/144 Tallgeese I Water Decal


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG 1/144 Tallgeese I
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG / HG 1/144 GN Arms

[Da Lin] HG / RG 1/144 GN Arms


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for 1/144 scale GN Arms
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM6.00

[Da Lin] Water Decal for RG 1/44 Banshee Gundam (Bronzing Gold Color Coating)

[Da Lin] RG Banshee Gundam Water Decal (Gold) (RG23)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Banshee Gundam Water Decal
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM16.00
RM16.00 Add to cart
Quick View
img
SAVERM7.10

[Da Lin] Number Symbol Water Decal (Bronzing Gold Color Coating)

[Da Lin] Number Symbol Water Decal (Bronzing Green Color Coating)


This is a High Quality Water Decal by Dalin and not a sticker. 

- Suitable for any grade of Gunpla kits
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM19.90
RM19.90 Add to cart
Quick View
img
SAVERM7.10

[Da Lin] Alphabet Symbol Water Decal C013 (Bronzing Gold Color Coating)

[Da Lin] Alphabet Symbol Water Decal (Bronzing Gold Color Coating)


This is a High Quality Water Decal by Dalin and not a sticker. 

- Suitable for any grade of Gunpla kits
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM19.90
RM19.90 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)

[Da Lin] Water Decal for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Gunner Zaku (Lunamaria Hawke Custom)
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM3.10

[Da Lin] Water Decal for RG 1/144 Astray Gold Frame Amatsu Mina (Bronzing Gold Color Coating)

[Da Lin] Water Decal for RG 1/144 Astray Gold Frame Amatsu Mina (Bronzing Gold Color Coating)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Gundam Astray Gold Frame Amatsu Mina
- Gold Foil 
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM17.90
RM17.90 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Unicorn Gundam

[Da Lin] Water Decal for RG 1/144 Unicorn Gundam


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG Unicorn Gundam Water Decal
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Sinanju

[Da Lin] Water Decal for RG 1/144 Sinanju


This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Water decal for RG Sinanju Gundam Water Decal
-- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong 

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Full Armor Unicorn Gundam

[Da Lin] Water decal for RG 1/144 Full Armor Unicorn Gundam


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG 1/144 Full Armor Unicorn Gundam
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Best use with Mr Hobby Mr. Mark Setter
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal RG 1/144 Gundam Astray Red Frame

[Da Lin] Water Decal for RG 1/144 Astray Red Frame

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- Suitable for RG 1/144 Astray Red Frame
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Gundam 00 Qan[T]

[Da Lin] RG Gundam 00Q Water Decal (RG06)


This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for RG Gundam 00 Qan[T] Water Decal
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 RM. Aile Strike Gundam

[Da Lin] Water Decal for MG 1/100 RM. Aile Strike Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Water decal for  MG 1/100 RM. Aile Strike Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Blitz Gundam

[Da Lin] Water Decal for MG 1/100 Blitz Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Blitz Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 Nu Gundam

[Da Lin] Water Decal for RG 1/144 Nu Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Aegis Gundam

[Da Lin] Water Decal for MG 1/100 Aegis Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Aegis Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for RG 1/144 X-1 Crossbone Gundam

[Da Lin] Water Decal for RG 1/144 X-1 Crossbone Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for RG 1/144 X-1 Crossbone Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Freedom Gundam Ver 2.0

[Da Lin] Water Decal for MG 1/100 Freedom Gundam Ver 2.0

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Suitable for MG 1/100 Freedom Ver. 2.0 Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for HIRM 1/100 Red Frame

[Da Lin] Water Decal for Hi-Resolution 1/100 Astray Red Frame Gundam

This is a High Quality Water Decal by Dalin and it is not a sticker. 

- Special design for Hi-Resolution 1/100 Astray Red Frame Gundam
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM8.00

[Da Lin] Water Decal for MG 1/100 Advanced GN-X

[Da Lin] Water Decal for MG 1/100 Advanced GN-X


This is a High Quality Water Decal by Da Lin and it is not a sticker.

- Suitable for MG 1/100 Advanced GN-X
- Best use with Mr Hobby Mr. Mark Setter
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM10.00
RM10.00 Add to cart
Quick View
img
SAVERM10.10

[Da Lin] Water Decal HG 1/144 MS-06S Zaku II Principality of Zeon Char Aznable's Mobile Suit Red Comet Ver.

[Da Lin] Water Decal HG 1/144 MS-06S Zaku II Principality of Zeon Char Aznable\'s Mobile Suit Red Comet Ver.

This is a High Quality Water Decal by Da Lin and it is not a sticker. 

- For model kit HG 1/144 MS-06S Zaku II Principality of Zeon Char Aznable\'s Mobile Suit Red Comet Ver.
- Best use with Mr Hobby Mr. Mark Setter
- Some parts has fluorescent effect
- Not pre-cut decal as the Bandai water decal slide
- Extra touch of detail for modeling kits
- Product from Hong Kong

RM7.90
RM7.90 Add to cart

Showing 211 - 240 of 417 products