Price Clear







Showing MOBILE SUIT GUNDAM product(s)

Showing 241 - 270 of 327 products

img
SAVERM61.30

MG 1/100 Z'gok (w/clear parts)

A target model kit of the MG clear parts campaign to celebrate Gunpla 30th anniversary! Comes with 1 clear body parts runner. You can enjoy the inner structure through the clear body parts.

RM118.60
img
SAVERM56.90

MG 1/100 RX-77-2 Guncannon

A highly detailed 1/100 model of the Gun cannon from the original Mobile Suit Gundam. Features internal skeleton in legs that outer armor can detach from, showcasing the mechanical features of the design. Includes alternate missile pod attachment to replace the cannons as well as working core fighter that can transform. Includes faction markings in the form of dry transfers and stickers.

RM123.00
img
SAVERM91.20

MG 1/100 MS-09 Dom

MS-09 Dom (MG)

RM148.70
img
SAVERM31.90

[121] HG 1/144 Extreme Gundam

  • EXTREME VS. Major Model appeared in the original MS Ekusutorimugandamu!
  • Discovery of a new action by the militants pose a motif instrument.
  • The four parts are included wrist, expand the range of expression.
  • The guitar can be stored in the shield-type rifle.
  • Reproduced in blue light-emitting clear parts.
  • Accessories: beam rifle, beam saber, shield

RM64.00
img
SAVERM111.78

MG 1/100 G Fighter (Operation V Model For Gundam Ver.2.0)

  • "V operation" Gundam reinforced equipment for Gundam Ver.2.0 "G fighter" appears in a full spec. 
  • The power reactor and the missile launcher unit of a new design are involved to B mechanism. 
  • Gundam can become independent with stability according to the step of the tiptoe and the heel. 
  • The caterpillar gives priority to the forming reproduction made of Pra, and reproduces various forms. 
  • Accessories: 1 and shield × hyper hammer × one two kind of attachment for action base Landing gear ×1 expression and one Kiza ×1 and 1 and mass standing × row standing × two kinds of maintenance staff

RM224.00
img
SAVERM54.90

MG 1/100 RX-78-2 Gundam Ver.1.5

  • MG RX-78-2 Gundam (Ver.1.5)
  • This update to the original MG RX-78-2 features enhancements including a prebuilt internal skeletal leg and deisgn appearance similar to the Perfect Grade Gundam as well as including weapons like the Gundam hammer and Beam Javellin. Core Figther, beam, sabers, beam rifle, bazooka still included!.
  • Upgrade product of the master's first grade! !

RM125.00
img
SAVERM135.10

MEGA SIZE 1/48 MS-06F Zaku II

  • Comes with a blade antenna head parts - And only wrist was new to the Zaku Bazooka. Wrist Zaku machine gun, heat hawk also supported. Also included rear rack. 

RM294.80
img
SAVERM15.90

[329] SDBB RX-78-2 Gundam (Animation Color)

  • It appears from the BB soldier of the 30th Gundam anniversary in a Gundam new specification. 
  • The prime field uses the one of BB soldier No.236 perfect Gundam. 
  • It is a popular style in the RX-78-2 Gundam of the BB soldier series. 
  • Movable range of head to decide line of vision easily. Even with arms with the collaboration parts of the chest and the shoulder, the pose is decided. Flight pose road-hugging ..&.. high. range of movement & movable tiptoe it where hip joint is wide - It is the marking Tetoron seal attached though it is small that produces the outlook on the field of real of ..becoming it.. [sei]. 
  • Arms are a new metal molds and newly built types. Special arms to consider the outlook on the world of a real BB soldier are reproduced by a new metal mold. - Accessories: 1 and 1 and shield × beam saber × 1 beam rifle.

RM32.00
img
SAVERM7.80

[063] SDBB Crossbone Gundam X2

BB Cross Bone Gundam X2

RM16.10
img
SAVERM15.90

[032] HGUC 1/144 MS-06S Char's Zaku II

Original Zaku in the superb 1/144 HGUC series (note that some overseas arms of Bandai repackaged the "8th MS Team" version of the Zaku, and formed it in red plastic, calling it Char's Zaku, but that was never released in Japan, and a completely different tooling from this item). 


The kit is fully posable, molded in color, snap assembly required, etc.

Accessories:
  • Heat Hawk Axe
  • Zaku Machine Gun
  • Bazooka

RM40.00
img
SAVERM525.70

PG 1/60 RX-78-2 Gundam (30th Anniversary Limited Model Extra Finish)

It's been a good year so far for Gundam Modellers. Bandai's Gunpla 30th Anniversary campaign has seen some stellar releases and now we are being treated to the Extra Finish Version of the Perfect Grade RX-78-2! Molded in a special finish that really gleams under lighting, this Gundam is otherwise identical to the original kit released in 1998 and features an incredible level of INNER detail. Just about everything you could hope for in terms of detail and poseability is here. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this! Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece is completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

RM794.20
img
SAVERM120.90

MG 1/100 MSA-0011(Ext) Ex-S Gundam

  • Okay, for a monster machine like this, with parts sticking out all over, and which is so top heavy it cannot stand on its own, the naming of "Ex-S" seems appropriate, considering the homonym "excess." 
  • But gosh, it's sooo sharp looking... Let me come back to that point about standing up by itself: It can't. At first, when I saw that this kit came with a display stand to hold it up, I was greatly dissapointed, as I really was looking forward to building it. 
  • But then I started thinking about all the other Gundam kits of mine that have fallen over and broken or lost parts when I had them posed someplace, and I began to think that maybe a display stand isn't such a bad idea after all... 
  • Of course the kit can transform into the long-range "G-Cruiser" mode, similar to the Zeta Gundam, and the display stand itself also converts into a mode specifically designed for displaying the kit when it's in ship mode. A whopping 31 runners of parts in all! Get ready for hours of cuttin' 'n' snappin' with this baby!

RM320.00
img
SAVERM49.90

[029] HGUC 1/144 Ex-S Gundam

By adding several new armor, weapons, and engine modules the engineers of Taskforce Alpha's Pegasus III were able to upgrade the basic MSA-0011 S Gundam into the super powerful Ex-S Gundam. The Ex-S Gundam has almost double the power of the original S Gundam, making it a fearsome unit indeed. The Ex-S Gundam still had three cockpits, but Ryu Roots was the only person who piloted the mobile suit, and due to Ryu's poor piloting skills it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.
With ALICE functioning as the co-pilot of the Ex-S Gundam "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could still take full control of the Ex-S Gundam, or any of its various components or weapons, at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryu were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and "she" was more than capable of compensating for Ryu's lack of skill.

For defensive purposes the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block which could nullify ranged beam attacks made against the mobile suit. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more after burners, additional propellant tanks, and thrusters.

Two new large thruster units were mounted on the Ex-S Gundam's back, giving the unit incredible thrust power and speed. Two large caliber beam cannons were mounted on both of the thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two large hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.

The Ex-S Gundam also had remote weaponry in the form of an incom, which was a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. But the Ex-S Gundam also featured two reflector INCOMs, stored in brackets in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs could not fire their own beams but instead were able to reflect incoming beam fire from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.

Like its predecessor, the Ex-S Gundam was also capable of undergoing a transformation into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam re-combined into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and the Ex-S Gundam would travel in this mode whenever it needed to travel over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in actual combat situations the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser would reach the battlefield and transform into the Ex-S Gundam.

RM100.00
img
SAVERM53.90

MG 1/100 RX-78-2 Gundam Ver.1.0

  • Bandai's Master Grade (MG) Gundam RX-78-2 is meant to attract the mature modeler who remembers growing up with Gundam, but wouldn't think of building the primitive kits that were released when Gundam first was broadcast in 1980! 
  • Like all the kits in the MG Gundam series, the level of detail is superb and virtually everything moves. 
  • The panels on the Gundam RX-78-2's legs flip open to reveal internal mechanisms. The head has a panel, too. 
  • Even the "Core Fighter" cockpit ship can be removed from the Gundam RX-78-2's mid-section. 
  • Fine mesh parts cover the inside of the chest air intakes for added realism. 
  • Three types of hands are included -- open palm, fists, and posable (moving fingers) for gripping any of the several weapons that comes with the kit.

RM95.00
img
SAVERM33.80

[206] HGUC 1/144 MS-08TX/S Efreet Schneid

- Zeon Remnest Army 's MS gets HG first!

- MS of Zeon Remnant Army appearing in [Gundam UC ep.4] made HG.
- The 14 heat darts equipped in various parts of the aircraft are removable and can reproduce battle scenes in the play.

- Precise reproduction of the characteristic head and chest shaping of ifrito MS.
- Mono Eye is movable independently.
- The power pipe secures the range of motion of the waist using dark room material.

-Point-
1.All 14 heat darts can be removed.
The handle part and the blade part reproduce color coding with different parts.

2.Heat · Dart reproduces both form of equipments and red heat state by molding color.

3.The giant buzz can move the grip part and take the shooting position.

Accessories
* Heat · Dart x 14
* Handheat heat · Dirt x 2
* Giant Buzz x 1

RM74.00
img
SAVERM20.70

P-Bandai Exclusive: MG 1/100 RX-78/CA Casval Gundam Ver.3.0

P-Bandai Exclusive: MG 1/100 RX-78/CA Casval Gundam Ver.3.0
Estimate Arrival: December 2017


The infamous Red Comet, Check out the Premium Bandai Edition of the RX78-2 Casval Gundam in the version of 3.0! 

RM255.20
img
SAVERM4.50

FG 1/144 MS-06S Char's Zaku II

FG 1/144 MS-06S Char's Zaku II

  • Is a first grade kit released by bandai
  • includes: FG 1/144 MS-06S Char's Zaku II, Zaku II Machine Gun
  • Item Size/Weight: 19.5 x 13 x 4cm/ 125grams

RM13.50
img
SAVERM4.50

FG 1/144 MS-06F Zaku II

FG 1/144 MS-06F Zaku II

  • Is a first grade kit released by bandai
  • includes: FG 1/144 MS-06F Zaku II, Zaku II Machine Gun
  • Item Size/Weight: 19.5 x 13 x 4cm/ 125grams

RM13.50
img
SAVERM10.90

FG 1/144 Zaku II & Char's Zaku II ( 2 in 1)

FG 1/144 Zaku II & Char's Zaku II ( 2 in 1)
The First Grade Model of the infamous Char and also a Grunt. This is a combo of FG 1/144 Zaku II & Char's Zaku II. -   

RM25.00
img
SAVERM46.00

P-Bandai: HGBF 1/144 Amazing Z'Gok

P-Bandai: HGBF 1/144 Amazing Z'Gok 


Amazing Z'Gok debuts in Gundam Build Fighters GM's Counter Attack! This Amazing Z'Gok offers variety of modes inspired from Agg MS series.

Agguy Mode
  • 2 heat rods are attached to the two arm thruster parts.
Agg Mode
  • By positioning the nails in the center to make a drill like structure. We can reproduce Agg's close combat attack system which allows Amazing Z'Gok to pierce any MS' armor.
Zogok Mode
  • Zogok's shoulder blades are installed in Amazing Z'Gok's arms!
Juaggu Mode
  • Juaggu's special mid-range combat equipment are reproduced with Amazing Z'Gok's arms! Just by extending its arm thursters, Amazing Z'Gok is ready to defend itself from its enemies.

RM104.00
img
SAVERM56.00

P-Bandai: HGUC 1/144 RGM-89D Jegan D Type [Pico Altidore]

P-Bandai: HGUC 1/144 RGM-89D Jegan D Type [Pico Altidore]


Release date : Nov, 2017
Estimate delivery :Dec, 2017

RM104.00
img
SAVERM35.80

[019] HG ORIGIN 1/144 MS-06CK Zaku Half Cannon

- Zaku Half Cannon made the first HG from [Mobile Suit Gundam THE ORIGIN MSD].

- Characteristic rear arming is a selection formula of Cannon gun and Vulcan cannon.
- Various options including 2 big guns that can be connected to the backpack and equipped, as well as different variation equipment can be reproduced by selecting parts.
- In addition to a variety of heavy weapons, weapons heat and Hawk dedicated to approach are included for handheld use and for carrying.

- Accessory: 

180mm Cannon gun x 1
120mm Balkan gun x 1
Big gun x 2
Heat . Hawk x 1
Heat . Hawk (storage) x 1

RM72.00
img
SAVERM33.80

[018] HG ORIGIN 1/144 MS-05 Zaku I [Kycilia's Forces]

- Commercialize Zaku I belonging to the xylia troops appearing in [Mobile Suit Gundam THE ORIGIN Crash Battle Battle].

- Reproduce characteristic crest crests with new parts.
- Various equipment to use in the play is included.

- Accessories: -   Machine gun for MS x 1Heat . Hawk x 1Heat . Hawk (storage) x 1Bazooka for MS x 1Shield x 1

RM68.00
img
SAVERM82.00

Daban 6641 MG 1/100 RGM-96X Jesta Canon

DABAN - RGM-96X JESTA CANNON

Brand : Daban
Code?6641
Series : Mobile Suit Unicorn
Scale : 1/100
Grade : Master Grade

This is not - Bandai version kit. 

#Gundam #daban #dragonmomoko #gunpla #jesta #cannon

RM98.00
img
SAVERM147.30

Bandai EX-34 YMT-05 Hildolfr

- Reproduce the deformation Mobile form in replacement, the tank form some parts.
- The part composition with an emphasis on ease of assembly caterpillar, material molded soft resin (synthetic rubber).
- I reproduce in grain finish to the part about being ground during running.
- The moveable, attached to the main body of the [shovel arm] can reproduce the scene of battle and Zaku that was in the play.
- Mono Eye realistically reproduced in clear.
- Included pilot figure 1 body 4 body deckhand of 1/144 size (space suit 2 body, body work clothes 2) and.

RM260.00
img
SAVERM99.60

E.F.S.F. Multipurpose Light Fighter FF-X7 Core Fighter

  • E.F.S.F. Multipurpose Light Fighter FF-X7 Core Fighter.
  • 4 figures included.
  • Molded product x 8, water transfer decal x 1, foil seal x 1

RM170.00
img
SAVERM418.00

MG 1/100 Plan303E Deep Striker Gundam

BANDAI MG 1/100 MSA-0011 DEEP STRIKER

Product size: Approx 21" Long, 11" Tall

Initiate Plan303E! Celebrating both the 30th Anniversary of the photo novel "Gundam Sentinel" and the release of 200 Master Grade kits, Bandai brings to reality the massive mobile suit weapons platform, code name: Deep Striker. Originally existing as a drawing, the S Gundam's theoretical upgrade module for assault operations has never been animated or featured in a story, but has gained massive fame for its heavily armed appearance. 

Over 21" long, this behemoth machine features a massive main gun unit, large radome, I-Field generator and giant boosters and propellant tanks covering its body. New molding is used for the bulk of construction including new pieces for the S Gundam's chest plate, the head, and shoulders that streamline its shoulder to head proportion, and even includes the shoulder sliding gimmick not seen on the original MG S Gundam release. 

A sense of realism and heft are created through mesh piping, chromed pistons, and intricate part separation in the main gun unit and tail stabilizer sections. 

A display stand is included to hold the Deep Striker in all its glory. 

Runner x 39, stickers, marking seals, instruction manual, mesh pipe, screw x 14, wire.

RM780.00
img
SAVERM215.90

E.F.G.F. M91A5 Main Battle Tank

Bandai's U.C. Hard Graph series combines elements of the Gundam universe with 1/35-scale military modeling, creating a new genre that appeals to fans of both types of modeling. The latest entry in the series is this massive M61A5 Semovente MBT, featuring two huge main guns! The sharply detailed kit includes flexible belt-style tracks that are connected with metal pins, decals for two versions, and three figures. Also includes photo-etched metal detail parts, wire cables, and clear parts. Parts are molded in multiple colors.

RM323.20
img
SAVERM16.00

[01] SD GUNDAM CROSS SILHOUETTE RX-78-2 GUNDAM

- CS frame is excluded and have to purchase separately. 

SD Gundam Cross Silhouette (SDCS) is a line of Super Deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. Introduced in June 2018, this series features inner frame technology, similar to Real Grade and Master Grade kits but on a smaller scale. Each kit's parts can be attached to either an 8.5 cm "SD" Frame, which features proportions inspired by Super Gachapon World: SD Gundam X, or a taller 9.5 cm "CS" frame with proportions inspired by SD Gundam G Generation Genesis.


RM32.00
img
SAVERM12.00

[OP-01] SD GUNDAM CROSS SILHOUETTE CROSS SILHOUETTE FRAME [WHITE]

SD Gundam Cross Silhouette (SDCS) is a line of Super Deformed Gunpla kits of the Mobile Suits from the Gundam metaseries. Introduced in June 2018, this series features inner frame technology, similar to Real Grade and Master Grade kits but on a smaller scale. Each kit's parts can be attached to either an 8.5 cm "SD" Frame, which features proportions inspired by Super Gachapon World: SD Gundam X, or a taller 9.5 cm "CS" frame with proportions inspired by SD Gundam G Generation Genesis.

RM24.00

Showing 241 - 270 of 327 products