Price Clear







Gundam Model Kits

Showing 211 - 240 of 1066 products

img
SAVERM29.70

[002] HG 1/144 Duel Gundam Assault Shroud

Here's a high-grade version of the heavily-armored mecha from Gundam Seed. Kit allows you to build the machine in either armored or standard form (and if you're careful, you can take the armor back off after assembly, too). Very cool!

RM42.20
img
SAVERM23.60

[005] HG 1/144 Blitz Gundam

Fantastic high-grade kit of the mech from the new hit series 'Gundam Seed'. Beautiful detail on all parts; nicely poseable thanks to several polycaps at the joints. Molded in colored plastic. Like most modern Bandai kits assembly is snap-fit (no cement required); instructions are in Japanese but clearly illustrated. Stickers for some detail are included; paint might make the final product look more 'realistic', but isn't necessary.

RM48.30
img
SAVERM31.90

[121] HG 1/144 Extreme Gundam

  • EXTREME VS. Major Model appeared in the original MS Ekusutorimugandamu!
  • Discovery of a new action by the militants pose a motif instrument.
  • The four parts are included wrist, expand the range of expression.
  • The guitar can be stored in the shield-type rifle.
  • Reproduced in blue light-emitting clear parts.
  • Accessories: beam rifle, beam saber, shield

RM64.00
img
SAVERM23.00

HGUC 1/144 RX-0 Unicorn Gundam Destroy Mode (Titanium Finish)

- HGUC Unicorn, appeared in a titanium finish strong, solid design! 


 - Accessories: beam saber x 2, beam rifle, shield

RM175.00
img
SAVERM37.90

[122] HGUC 1/144 Geara Zulu (Guards Type)

- Accessories: Shutsurumu Faust, beam machine gun, hand grenades, Hawk beam Shield for rifle grip (right), for the saber grip (left), Hirate (left)

RM82.00
img
SAVERM101.50

HGUC 1/144 Sinanju (Titanium Finish)

- HGUC Shinanju, appeared in a titanium finish strong, solid design! 

- Accessories
* beam saber x 2
* beam rifle
* shield
* beam expansion state A-xe x 2
* A-xe stored state beams x 2

RM210.00
img
SAVERM39.90

HG 1/144 Reborns Gundam Trans-Am Mode (Gloss Injection Ver.)

- Accessory: Large-scale GN beam saber ×2 that GN buster, large-scale rifle, GN [finfangu] × 4 (Canon Inc. ordnance at the Canon Inc. mode), and is shielded.

RM68.00
img
SAVERM29.60

HG 1/144 Susanowo Trans-Am Mode (Gloss Injection Ver.)

- Accessory: 2, saber × [bi-muchakuramu], flat part of the hand (Only the right hand :), and the BA-1 type.

RM60.30
img
SAVERM32.40

HG 1/144 Gundam Seravee Trans-Am Mode (Gloss Injection Ver.)

- Accessory: GN bazooka II and GN beam saber × 2 (one brevi 1 in length)

RM100.50
img
SAVERM33.90

[055] HG 1/144 Masurao

- Includes: Beam Saber x2 (long/short), Beam Chakram x1, Open hands with expression (left/right) x1, Closed Fist (right), BA-1 type base x1

RM56.00
img
SAVERM34.90

[053] HG 1/144 Reborns Gundam

- Able to attach the rifle in two ways. - Comes with: GN Buster Rifle, Large GN Fin Fang x4 (Cannon during Cannon mode), GN Shield, Large GN Beam Saber x2

RM73.00
img
SAVERM35.90

[049] HG 1/144 Gaddess

A unit used by the Innovate Anew, it features GN saber fangs and sword that can be displayed suspended behind in mid air. A display is included.

RM60.00
img
SAVERM32.60

[047] HG 1/144 Hiling Care`s Garazzo

- Accessory: 2 and 2 and 2 and special flat part of the hand × grasp person × stand beam saber

RM57.30
img
SAVERM29.90

[046] HG 1/144 Susanowo

Refined Masurao used by Mr. Bushido in the second season of Gundam 00 features physical blades that can be combined, a beam chakram effect part that can be housed above the head, and Try Punisher weapon housed inside the chest and shoulders. Display stand included.

RM60.00
img
SAVERM23.90

[045] HG 1/144 O Gundam 0 Gundam (Type A.C.D)

- A rifle that shields of the exclusive use and is special is attached. 

 - Accessory: 1 and 2 and 1 and 1 and double Audra Eve 
- GN particle storage tank 
- 1 GN shield 
- GN beam saber 
- GN beam rifle

RM48.00
img
SAVERM15.80

HGUC 1/144 RGM-79(G) GM

RGM-79 (G) GM

RM32.10
img
SAVERM26.50

[033] HGUC 1/144 Rick Dias (Red)

Along with the Hyaku-Shiki (Type 100), the Rick Dias is one of the most popular mecha from Zeta Gundam as it was designed by Mamoru Nagano of L-Gaim and Five Star Stories fame. This new kit does it justice, featuring overall slimmer, sharper proportions than the chunky High Complete Model or 1/100 kit of many years ago. As usual for kits in the High Grade series, it's molded in color, features snap assembly, and has poly-caps for all the moving joints.Reviews by Gundam.tk: Personal review: Limited mobility on the feet as the armor pieces on the leg constrained the movement of the lower body part, you have a clearly loose part on the head of the rick Dias (once is completed), and you got to be careful on 'some' of the part.

RM45.40
img
SAVERM23.90

[044] HG 1/144 Gundam Exia Repair II

  • Gundam Exia in its restored form features new GN Sword weapon and different leg and shoulder parts. Also contains parts to build the original Exia.
  • Accessories: new GN Sword x 1, GN beam saber x 4, GN shield x 1, GN Short Blade x 1, GN Long Blade x 1, GN beam saber x 1

RM48.00
img
SAVERM21.50

[055] HG 1/144 Trojan's Gundam Astray Green Frame

  • From the "Gundam Seed Frame Astrays" manga series comes this nicely detailed snap-fit model kit of Trojan Noiret's Gundam Astray Green Frame, armed with its deadly twin sword rifle! 
  • Trojan's custom Mobile Suit is molded in color and will be fully articulated upon completion, thanks to its polycapped joints. 
  • In addition to its twin sword rifle, it comes equipped with the standard beam saber, beam rifle, and shield. 
  • Stickers are included to add detail to your completed kit.

RM45.40
img
SAVERM25.90

[004] HG 1/144 Hyperion Gundam

This Mobile Suits Variation model is molded all in color and features snap-fit assembly. Highly posable with lots of polycaps at the joints. Stickers are included for details. The light shield is represented with a nicely molded clear green plastic part.

RM46.00
img
SAVERM49.90

[081] HGUC 1/144 MSM-10 Zock

The amphibious green mobile suit from "Mobile Suit Gundam" has arrived in Bandai's HGUC series! This snap-fit-assembly kit comes molded in color and features articulated joints, plus impressive inner mechanical detailing for its head and chest areas. Its multi-directional mono eye is movable through its rails underneath the armor.

RM100.00
img
SAVERM23.90

[012] HGUC 1/144 Gundam Astray Red Frame

Lovely HG Gundam Astray Red Frame features parts molded in color, and snap-fit assembly, making it a breeze to get this poseable mech into action! The sword blade is made of 'meki' parts -- nicely chromed for that metallic look! Stickers are included for detail. 

RM48.00
img
SAVERM27.90

[071] HGUC 1/144 Zaku I Sniper Type

Born from the collaboration between Bandai Namco Games, Bandai, Sunrise, and Banpresto for their "Harmony of Gundam" project, the Zaku I Sniper Type is a new Zeon Mobile Suit especially created for the new "MS Gundam: Bonds of the Battlefield" arcade game. 


This impressive kit is easy to assemble and looks great even without paint! Its right knee can be folded down when taking a sniper position, a nylon mesh cover and bendable wire are included for detailing and connecting the backpack to the sniper rifle, and there are clear plastic parts for the mono eye and scope lens. 

A Zaku machine gun is also included as a backup weapon.

RM56.00
img
SAVERM23.90

[087] HGUC 1/144 MS-06FZ Zaku II FZ

Here's a sharp HGUC snap-fit plastic kit of MS-06FZ Zaku II FZ (Kai) as it appeared in the "Mobile Suit Gundam 0080: War in the Pocket" OVA series. Molded in color, this kit features polycapped joints and movable skirt armor that allow it to be set in dynamic poses. An optional Zaku B-type head is also included, along with an MMP-80 90mm machine gun, three hand grenades (molded as one part), and a heat hawk. A sheet of foil stickers and a Zeon marking sticker are provided to add detail to the completed model.

RM48.00
img
SAVERM27.90

[014] HGUC 1/144 AMX-011 Zaku III

A great kit of this rather busy-looking variation on the Zaku. Includes beam rifle, beam cannon, heel claws, backpack and shoulder armor. Snap assembly. Molded in final colors. Very reasonable price considering the number of parts.

RM62.00
img
SAVERM15.90

[032] HGUC 1/144 MS-06S Char's Zaku II

Original Zaku in the superb 1/144 HGUC series (note that some overseas arms of Bandai repackaged the "8th MS Team" version of the Zaku, and formed it in red plastic, calling it Char's Zaku, but that was never released in Japan, and a completely different tooling from this item). 


The kit is fully posable, molded in color, snap assembly required, etc.

Accessories:
  • Heat Hawk Axe
  • Zaku Machine Gun
  • Bazooka

RM40.00
img
SAVERM43.90

HGUC 1/144 MS-06 Zaku The Ground War Set

Recreate the heated battle scenes seen in the "Mobile Suit Gundam MS IGLOO 2: Gravity Front" OVA or build your own custom One Year War battlefield diorama with this impressive HGUC set offering! Included are snap-fit parts that come molded in color and allow you to build a HGUC mass production type MS-06 Zaku, which can be equipped with weaponry consisting of a Zaku Machine Gun, Heat Hawk, a pair of three-tube missile pods, Zaku Bazooka with two firing effect parts, two Crackers, and two Sturm Fausts. Three pairs of optional hands are provided. Also packed in this set are two Type-615+ E.F.G.F. M61A5 main battle tanks with two explosion effect parts, two PVN.4/3 Wappas, plus four Zeon and four Earth Federation soldiers (figures come molded in gray). A foil sticker and a sheet of waterslide marking decals are included.

RM88.00
img
SAVERM45.90

[111] HGUC 1/144 ZZ Gundam

ZZ Gundam makes the move to HGUC! To preserve the outstanding detail and proportions, transforming is accomplished via interchangeable parts. The 'Double-Zeta' can be transformed between Core Fighter, Core Top, Core Base, and G Fortress modes. As part of its arsenal, the ZZ Gundam features a Double Beam Rifle, two Hyper Beam Sabers, and Missile Pods. When displaying it in G Fortress Mode, part of the frame is used as a base. This piece also holds parts which are not used when in certain modes. Foil stickers are also provided. - Also comes with a stand base that makes balanced display possible. - Accessories: Hyper Beam Saber, Core Fighter, Double Beam Rifle, Display Stand

RM92.00
img
SAVERM49.90

[029] HGUC 1/144 Ex-S Gundam

By adding several new armor, weapons, and engine modules the engineers of Taskforce Alpha's Pegasus III were able to upgrade the basic MSA-0011 S Gundam into the super powerful Ex-S Gundam. The Ex-S Gundam has almost double the power of the original S Gundam, making it a fearsome unit indeed. The Ex-S Gundam still had three cockpits, but Ryu Roots was the only person who piloted the mobile suit, and due to Ryu's poor piloting skills it was up to ALICE, the Ex-S Gundam's highly advanced artificial intelligence combat computer, to do most of the fighting against more skilled opponents.
With ALICE functioning as the co-pilot of the Ex-S Gundam "she" was constantly getting more advanced. ALICE was constantly growing in comprehension and depth, and was swiftly evolving into something more akin to a fully rationalizing and thinking creature than a simple machine. ALICE could still take full control of the Ex-S Gundam, or any of its various components or weapons, at any time, and would begin to do so constantly at times when "she" felt the Ex-S or Ryu were threatened. ALICE proved to be a useful co-pilot of the Ex-S Gundam, and "she" was more than capable of compensating for Ryu's lack of skill.

For defensive purposes the Ex-S Gundam featured additional armor on the front of the chest which afforded extra protection for the first two cockpits. This extra chest armor also featured an I-Field generator which created an invisible barrier of Minovsky Particles around the Ex-S Gundam's cockpit block which could nullify ranged beam attacks made against the mobile suit. Additional armor added onto the front of the torso also protected the third cockpit, while extra armor on both sides of the legs featured more after burners, additional propellant tanks, and thrusters.

Two new large thruster units were mounted on the Ex-S Gundam's back, giving the unit incredible thrust power and speed. Two large caliber beam cannons were mounted on both of the thruster units, giving the Ex-S Gundam two more back beam cannons than the S Gundam. The Ex-S Gundam's beam smart rifle was now attached to the front torso of the mobile suit instead of the hips, making room for the two large hip beam cannons that were optional on the S Gundam to be attached to the sides of the Ex-S Gundam's waist permanently. The Ex-S Gundam's head featured four 60mm vulcan guns, while four additional 60mm vulcans were mounted on the tail stabilizer attached to the back.

The Ex-S Gundam also had remote weaponry in the form of an incom, which was a small wire-guided red disc stored in the Ex-S Gundam's forehead that could fire beams when deployed. But the Ex-S Gundam also featured two reflector INCOMs, stored in brackets in the large knee armor, which could be deployed and guided by wire like a standard INCOM. Reflector INCOMs could not fire their own beams but instead were able to reflect incoming beam fire from the Ex-S Gundam or another unit, and redirect it in another direction. Lastly, for use in melee combat situations, the Ex-S Gundam featured two beam sabers, also stored in the knee armor.

Like its predecessor, the Ex-S Gundam was also capable of undergoing a transformation into a waverider mode of sorts, but unlike the S Gundam, which divided into three separate components, the Ex-S Gundam re-combined into one large unit called the G-Cruiser. For its size, the G-Cruiser was incredibly fast and the Ex-S Gundam would travel in this mode whenever it needed to travel over a great distance in a short amount of time. To conserve the fuel of the Ex-S Gundam for use in actual combat situations the G-Cruiser had two large propellant tanks mounted in the front over the Ex-S Gundam's shoulders. These extra fuel tanks would be jettisoned when the G-Cruiser would reach the battlefield and transform into the Ex-S Gundam.

RM100.00
img
SAVERM29.60

[008] HG 1/144 Justice Gundam

The kit may be tiny but the ideals behind it are infinite! This 1/144 high-grade kit of the Justice Gundam is beautifully shot in colored plastic, with fantastic detail as is usual for Bandai. All parts snap together. Instructions are simple, clear illustrations, to make building a breeze. The finished kit is poseable thanks to several polycaps in the joints (but be careful balancing with that backpack on!). Stickers are included for detail. Paint and glue are not necessary, but paint might enhance the appearance of the finished model. History of Justice Gundam In mid CE 71, ZAFT created a series of advanced mobile suits based on technology reverse-engineered from the captured Earth Alliance G Project suits. Like their EA predecessors, the ZAFT Gundams are armed with advanced beam weaponry and protected by Phase Shift armor. One of these suits is the Justice, which can be considered the sister unit of the Freedom. Most of the Justice' and Freedom's systems were tested on the YFX-600R GuAIZ Experimental Firearms Type. Late in CE 71, Athrun Zala, former pilot of the Aegis, is assigned the Justice with the mission to either recapture or destroy its stolen sister unit, the Freedom. Instead, however, Athrun joins forces with his old friend Kira Yamato, in defending neutral Orb from an Earth Alliance attack. Later he met up with the support vessel Eternal which carried both METEOR units. Athrun and Kira used the METEORs' firepower to thwart an Earth Alliance nuclear missile attack on the PLANTs on the final day of the war, and Athrun also destroys the GAT-X131 Calamity with his METEOR's beam sword. Afterward, Athrun flies the Justice inside the gamma ray laser GENESIS and self-destructs it, preventing his father's doomsday weapon from firing on the Earth. Over two years later, a more close-combat-oriented advanced version of the Justice is built by Terminal, called the ZGMF-X19A Infinite Justice, which is again piloted by Athrun Source:Wikipedia

RM60.30
High Grade (HG) are the most commonly built kits on this list. They are easy to build, their price point is affordable, and there is a wide variety of HG kits to choose from. These kits can easily be spotted by the HG moniker found on the corner of the front box art. These kits have more articulation than SD units, which gives it more options for poses. They are 1/144 scale make them the perfect size for collecting and displaying.

In our previous blog, we mentioned that HG kits is our recommended grade for beginners. This is because they offer a great experience without having to break the bank. As you progress and become a better builder, HG kits become fantastic test subject to practice weathering and painting techniques.

Showing 211 - 240 of 1066 products