Price Clear







Gundam Model Kits

Showing 211 - 240 of 325 products

img
SAVERM11.20

[BB321] Bacho Blue Destiny

The "Blue Destiny," a.k.a "Shin-i no Kin-Bacho," rides forth from the new Sangokuden series! Armor can be removed and hair parts can be reversed to transform from normal to berserker mode. Knob on head can be turned to transform eyes from normal to berserker mode. It includes the Shiryu Gokurenso weapon, which can be disassembled into multiple swords and spears.

RM22.70
img
SAVERM83.90

MG 1/100 RX-78-2 Gundam Ver.2.0

  • From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  •  Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  •  Equipped with a movable core fighter! 
  •  Includes Stand to display the Core Fighter.
  •  Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer

RM168.00
img
SAVERM143.30

MG 1/100 RX-78-2 Gundam Ver.2.0 (Titanium Finish)

  • From its inception up to here, the RX-78-2 Gundam is closer than ever to it’s original form! 
  • Follows the look of the Suit as shown in Mobile Suit Gundam thoroughly through detailed exterior proportions.
  • Equipped with a movable core fighter! 
  • Includes Stand to display the Core Fighter.
  • Accessories: Beam Rifle, Grenade Launcher, Beam Saber x2, Shield, Hyper Bazooka, Beam Javelin, Gundam Hammer

RM297.60
img
SAVERM119.90

MG 1/100 Musha Gundam MK-II

  • Musha Gundam redesigned by Katoki Hajime joins the MG series! 
  • Its distinguishing design of armor is finely re-created. 
  • It can hold dynamic poses with its plentiful movable parts. 
  • Gold and silver metallic color plating makes gorgeous impression. 
  • Two swords can be attached on both sides. Includes special weapons, Naginata and rifle. 
  • Runner x14, Foil sticker x1, Marking sticker, Gundam Decal x1, Mesh tube x1, Instruction Manual 

RM240.00
img
SAVERM200.90

PG 1/60 MS-06S Char's Zaku II

This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

Weight : 1650g

RM460.00
img
SAVERM200.90

PG 1/60 MS-06F Zaku II

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

RM460.00
img
SAVERM91.90

MG 1/100 RX-75 Guntank

  • Improved design for placement of the caterpillar onto surface, allowing better posture control for the turrets. 
  • Linked movement for the caterpillar, allowing flexible movement. 
  • Caterpillar has the feature of resistance to the surface when rotating. 
  • Dozato Carrier in front and behind the chassis can be deployed. 
  • Stands included to show the docking sequence of Core Fighter to Guntank. 
  • Suspension mechanism for the capital unit can be reproduced. Head has lighting effect. 
  • LED unit included. Figures & accessories included: stand for the Core Fighter, cockpit figure (Hayato), fighter cockpit figure x2 (Ryu, regular), standing figure x 4 (Bright, Mirai, Hayato, Ryu). Total 16 runners, dry transfer decal & clear sticker included. Weight: 2kg

RM196.00
img
SAVERM51.60

MG 1/100 RB-79 Ball (Shark Mouth)

  • A new paint scheme and shark-mouth marking, and the removal of the bar at its front top, dress up this twin sibling of the MG Ball Ver. Ka (Katori Version). 
  • Includes clear "Gundam Stickers" with various in-scale warnings and markings on them. 
  • Once built and clad in its armor, the posable Ball can be displayed on the included stand and base (includes figures of two standing mechanics and a seated pilot).

RM80.30
img
SAVERM11.90

[200] SDBB GUNDAM RX-78-2 (G-Generation O)

BB-200 GUNDAM RX-78-2 Simple instruction included in a box. Weight: 500g


(G-Generation O)

RM24.00
img
SAVERM9.90

[221] SDBB Guntank

BB-221 Guntank Simple instruction included in a box. Weight: 500g

RM20.00
img
SAVERM106.00

MG 1/100 MSA-0011 S Gundam

A prototype mobile suit that appeared in the Gundam Sentinel series. Transformable to 3 Jet fighter - G Attacker, G Bomber and G Core. Features with a working cockpit hatch. Includes 3 pilot figures. Beam smart gun can be anchored to the waist to replicate the attack pose. Water-slide decals are included as well for accurate markings. Stories The MSA-0011 (MSZ-011) S Gundam (also called Superior Gundam, but its original name is the Supreme Gundam[1], codename: "Ι Gundam" (Iota Gundam) in the Greek letter Anaheim Gundam series), more frequently called the S Gundam, is an incredibly powerful Earth Federation Forces mobile suit.[2] There were four units built[3], but only one has ever made an appearance in any story. The one appeared in Gundam Sentinel and in the story, send to the Taskforce Alpha battleship Pegasus III, where it was assigned to pilot Ryu Roots. 


Although the S Gundam had three separate cockpits, the other two were not used until the very end of the plot, where three pilots would be saved by the core block system (see below). Since its plans are highly classified, it is said in chapter 1, Revolt in Pezun, that the pilots have been only able to train in Z Plus B types, which are the highest performance transformable mobile suit they have access to. The S Gundam is equipped with relatively heavier armour than its Z Plus cousin, which is specifically mentioned in the story (Chapter 2:Sally Forth! S Gundam) where the 2 Z Plus C1 accompanying the S Gundam in its booster configuration took more damage even though S Gundam was at a much higher acceleration when against enemy fire. To further confirm this point, the author mentions that the pilot cannot even bear to imagine what will happen if they are using Neros or GM IIIs in the same situation. Within the design notes, the offensive capabilities of the S Gundam featured a highly accurate beam smart gun, with 12MW power operating the beam smart gun normally, the unit can connect the beam smart gun to two extra power outlets on both left and right hips or the centre of its belly, to supply extra power that increases the beam smart gun up to 56MW. 

However, this will have to sacrifice the mounting of one of the two 12MW beam guns that are similar to the ones used in the Zeta Plus mobile suit series. Two beam cannons protruded from the S Gundam's backpack over the shoulders, and it also featured four 60 mm vulcans in the tail stabilizer and four 60 mm vulcan guns in the head, in which the mechanical designer, Katoki Hajime, specially took the problems of this weapon in the pass series into account, including the barrel length being too short which means the weapon can only have grenade launcher effects as well as no space for ammo, and lengthened the barrel (also the depth of the head of S Gundam) and introduced the liquid explosives electronic firing mechanism to the design[2], in which later retconed earlier designs and is again mentioned in Gundam Officials, the Gundam Encyclopedia and Master Grade instructions. It also featured a red circular-shaped wire-guided remote beam weapon called an Incom that was stored in the forehead. And finally, to round out the S Gundam's weaponry, the unit featured two beam sabers stored in recharge racks in the small white protrusions in the unit's knees. The S Gundam is built on a modular design, made up of two separate transformable units that could combine with a core fighter variant called the G Core to create the full S Gundam. The S Gundam was capable of separating into the 3 crafts. The G-Attacker (also referred to as the A Parts) is one of the crafts, which was made up of the upper torso area of the S Gundam. The second craft was called the G-Bomber (also referred to as the B Parts), which were composed of the lower torso and legs of the S Gundam. 

The G-Core core fighter, which were the C Parts of the S Gundam, was flown by Ryu Roots. The story used this mechanism as a make shift role for the task force alpha not having enough mobile suits for the battle and has to compromise by separating the S Gundam for 3 pilots in chapter 12, Pursuit. The author also made his own disbelieve in combining robots[4] in the midst of battle into the plot, where S Gundam is forced to combine back into the mobile suit form and sacrifice of the 3 pilots' instructor was made by being their shield in order to buy them time for the combination in chapter 13, Triple Attack. A.L.I.C.E. The S Gundam in Gundam Sentinel featured a unique and incredibly complex artificial intelligence computer that went by the acronym name A.L.I.C.E., which was developed by Ryu Roots' mother, Meith Roots. A.L.I.C.E., which stood for Advanced Logistic & Inconsequence Cognizing Equipment, was more than the standard learning computer featured in earlier mobile suits; "she" had the capability to think and to grow. The growth of ALICE is one of the main plot lines to the story, compared to the growth of the main character Ryu Roots. In "her" early stages of growth ALICE was not yet a full individual, but "her" experiences with Ryu Roots would help "her" to grow. ALICE is originally programmed to place the pilot(s) life as first priority, and could assume total control of the S Gundam if "she" felt that the unit was in danger. 

This function has been used throughout the plot to save the pilot's life and caused confusion to the pilot since Ryu Roots has no knowledge of ALICE's existence even towards the very end of the story. Although 4 S Gundams have been produced, it is known that the other 3 S Gundams do not have the ALICE system installed on it. 

Stories source from: http://en.wikipedia.org Total 505pcs parts Simple Instruction included in a box.

RM224.90
img
SAVERM90.90

MG 1/100 MSN-02 ZEONG

  • Pull-out hip and shoulder joints.
  • All joints are movable fingers 10.
  • Mono Movable nozzle head and ears.
  • Refer to the left and right arm stand.
  • Detachable head.

RM240.00
img
SAVERM39.90

Gunpla Starter Set : HGUC Gundam Vs. Zaku II

A 2 pack featuring the iconic mecha from the original Mobile Suit Gundam TV series includes the RX-78-2 and also the Zaku 2. 


Both feature their High Grade Universal Century kit designs and come complete with their original weapon configurations. 

This special 2 pack also includes a how to guide providing pictorial steps on how detail Gunpla and go farther beyond simple straight assembly. 

Runner x 8 
Instruction Manual x 1

RM80.00
img
SAVERM40.50

MG 1/100 RB-79 Ball Ver.Ka (30th Anniversary)

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!

RM79.40
img
SAVERM155.90

MEGA SIZE 1/48 RX-78-2 Gundam

The announcement of a 1/48 scale Gundam sent ripples through the modeling community and now, verily, it has come to pass. Once assembled it will stand 36.5cm (almost 15 inches) tall, but perhaps the most impressive aspect of this monstrous kit is that you don't need any tools! That's right! The pieces attach to the runner by a very thin length of plastic so you can break the pieces off with your hands! To make things even easier, Bandai has made it so that you can snap two runners together and then remove the individual pieces. There are even icons on the runners to indicate which part of the kit the pieces are for. The 1/48 Gundam comes with two 1/48 beam sabers and his large (even larger now) beam rifle, and shield. There is even a mini-booklet from Dengeki Hobby with detailed modeling tips for this model! Don't be intimidated by its size, this kit is a snap-technology as well. (The 1/144, 1/100, MG Gundam shown with the 1/48 one below is just for size comparison; all are not included.) ** The boxart were cropped to show the best quality image

RM312.00
img
SAVERM57.10

MG 1/100 RX-78-2 Gundam One Year War (w/clear parts)

Molded in the colors used in the classic "Mobile Suit Gundam" anime series. This version is identical to the MG RX-78-2 Gundam kit from 2005 except for the color and decal sheet for custom markings. This kit features the same incredibly flexible inner frame and sharply detailed armor. Includes with its signature weaponry including the beam rifle, hyper bazooka, Gundam hammer, two beam sabers, and shield. An unpainted in-scale pilot figure of Amuro Ray (molded in white) is included.

RM134.80
img
SAVERM117.90

MEGA SIZE 1/48 MS-06S Char's Zaku II

  • Char's Zaku came from all Gandamufan Megasaizumoderu dedicated to big models! 
  • Ease to assemble the pipe liner lock mechanism in the adoption of power! Of course, also supports moving! 
  • Daburusepareta mono eye is included in the mobile! 
  • Children's fingers can easily ?Kasemasu. 
  • Their own tools - and is ... Megasaizumoderu Daburusepareta to help take the parts from the runner. 
  • RG also adopted a new panel line. 
  • Without any discomfort - RG Megasaizugandamu reproduced alongside the panel lines. 
  • RG shape conforms to the design of the backpack! 
  • Great! Easy to make! Fun! Megasaizumoderu POINT1: No special tools required for assembly. Nipper can not use. 
  • POINT2: Snap adopted without glue to assemble. 
  • POINT3: hearty! Ganpurasuteppuappumanyuaru come. 
  • POINT4: fun and fast-lock type runner. 
  • POINT5: Easy to assemble in Daburusepareta. 
  • POINT6: assembly instructions and color illustrations, intuitive icons that the necessary parts (symbols) is adopted. 
  • POINT7: Iropura because, without a finished painting cool! 
  • POINT8: uses a special decal, Ditiruappu challenge! 
  • Accessories: Zaku machine gun, heat hawk

RM312.00
img
SAVERM239.90

PG 1/60 RX-78-2 Gundam

This item is a posable, Perfect-Grade injection-plastic kit of an item from the Gundam universe. 626 parts. 31cm high when completed. 
Things don't get much better than this for Gundam fans.

The kit that Bandai has produced is truly amazing. The most striking aspect is the incredible level of INNER detail. It's almost a shame to put any of the cover panels on this thing, because there is so much on the inside that a little silver and black paint will make very interesting to look at. Bandai is aware of this, and is also going to market an optional parts set for the kit that includes transparent body pieces! This is due in December, we're told. That set will also include a light-up beam saber.

What can you say about this kit? Though some weapons are not included (no doubt for a later release), it's just about everything you could hope for in terms of detail and poseability. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this. Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece will be completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

RM480.00
img
SAVERM16.60

HGUC 1/144 RX-78-2 Gundam (Ver.G 30th)

RX-78-2 Gundam Ver.G 30th

RM50.30
img
SAVERM7.80

[061] SDBB Gundam Blue Destiny

BB Gundam Blue Destiny

RM16.10
img
SAVERM49.90

[081] HGUC 1/144 MSM-10 Zock

The amphibious green mobile suit from "Mobile Suit Gundam" has arrived in Bandai's HGUC series! This snap-fit-assembly kit comes molded in color and features articulated joints, plus impressive inner mechanical detailing for its head and chest areas. Its multi-directional mono eye is movable through its rails underneath the armor.

RM100.00
img
SAVERM69.90

MG 1/100 MS-06F Zaku II Ver.2.0

  • A realistic kit for the famed earthbound Zaku II, the Ver. 2.0 is the advanced heir to the older Master Grade line, and introduces a new standard for MG Zaku II! 
  • With a new frame for a new line, this redesigned kit boasts a new 06 Zaku II frame that will be seen in new Zaku kits.
  • Inner frame designed to accommodate a wide variety of Zaku designs.
  • Power pipe systems redesigned for easy building, and frame features improved twist joints, giving the kit much more action than the previous Zaku II MG.
  • ‘Monoeye’ camera movement gimmick allows for eye position to be changed.
  • Inner frame features a shell for the massive shoulder armor.
  • Outer shoulder armor is recreated with detachable spikes.
  • Redesigned ankle link boasts improved performance. 
  • New mobile dual action mechanism improves leg joint performance .
  • Cockpit hatch can be from the left or right, and cockpit can be shifted from right to left thanks to a lever gimmick. 
  • Accessories: 120mm Machine Gun x1, Zaku Bazooka x1, Heat Hawk x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM140.00
img
SAVERM27.90

[071] HGUC 1/144 Zaku I Sniper Type

Born from the collaboration between Bandai Namco Games, Bandai, Sunrise, and Banpresto for their "Harmony of Gundam" project, the Zaku I Sniper Type is a new Zeon Mobile Suit especially created for the new "MS Gundam: Bonds of the Battlefield" arcade game. 


This impressive kit is easy to assemble and looks great even without paint! Its right knee can be folded down when taking a sniper position, a nylon mesh cover and bendable wire are included for detailing and connecting the backpack to the sniper rifle, and there are clear plastic parts for the mono eye and scope lens. 

A Zaku machine gun is also included as a backup weapon.

RM56.00
img
SAVERM15.90

[032] HGUC 1/144 MS-06S Char's Zaku II

Original Zaku in the superb 1/144 HGUC series (note that some overseas arms of Bandai repackaged the "8th MS Team" version of the Zaku, and formed it in red plastic, calling it Char's Zaku, but that was never released in Japan, and a completely different tooling from this item). 


The kit is fully posable, molded in color, snap assembly required, etc.

Accessories:
  • Heat Hawk Axe
  • Zaku Machine Gun
  • Bazooka

RM40.00
img
SAVERM19.90

[021] HGUC 1/144 RX-78-2 Gundam

The HGUC  1/144 RX-78-2

- Core Fighter of shape importance is attached
- Weapons beam rifle x 1
- hyper bazooka x 1
- Shield x 1
- beam saber x 2 is attached

RM40.00
img
SAVERM27.90

[065] HGUC 1/144 EMS10 Zudah

An experimental mobile suit with high velocity, the Zudah from the MS IGLOO series comes with Zaku machine gun, heat hawk, shield, and giant 135 mm rifle. Comes with 3 different helmet styles to replicate the variantes used in the series.

RM56.00
img
SAVERM32.30

[386] SDBB RX-105 Xi Gundam

Expand the line followed from char's counterattack, Gundam UC Gundam universal century series lineup! And from the popular "Hathaway's Flash" Finally, hero machine!

  • minovsky craft unit deployment
    Open and close the shoulder and chest armor!
    Flight form can be reproduced by minovsky craft unit deployment gimmick!

  • major armed base addition is also included!
    Also comes with a display base, beam rifle, beam Saber, and shield as well as the body and garsezon mountable.

  • Messer, garsezon included!
    Comes with MS manipulates the hero companions "Messer", save flight system 'garsezon'! You can be boarding!

  • eyes switched gimmicks
    By switching the eyes part sides, can be selected without eyes!

  • funnelmisail
    Funnelmisail injection effect parts! Can reproduce the firing scenes!

RM56.60

Showing 211 - 240 of 325 products