Price Clear







Gundam Model Kits

Showing 1 - 30 of 39 products

img
SAVERM159.90

MG 1/100 RX-93 Nu Gundam Ver.Ka

  • Accessories: beam rifle, shield, beam saber, beam saber (small), Fin funnel x? 6 
  • Item Size : 39 x 31 x 12 cm / 1163g


According to wikipedia

The RX-93 ? Gundam (aka Nu Gundam, Nu) is a mobile suit that appears in Mobile Suit Gundam: Char's Counterattack. It was piloted by Amuro Ray.

The ? Gundam was one of the most advanced mobile suits of its time in U.C. 0093, together with Char Aznable's MSN-04 Sazabi, designed and used by Amuro Ray himself during the Second Neo Zeon War. It was manufactured at Anaheim Electronics' Von Braun plant and completed in a short period of time (about three months) under the supervision of chief engineer October Saran. Its design is based on the average value of specifications of each successive generations of Gundam-type units from the the original Gundam to the ?? Gundam, and updated with state-of-the-art technologies introduced at the time.

The ? Gundam's design also focuses on versatility and operational aspects as well as emphasis on reliability and durability for protracted battles. It adopts unitized parts that are designed according to EFF standards, except for the Psycoframe, for easier procurement of parts and materials and reducing special components as much as possible. It can be easily repaired due to maintenance feedback and combat data. In addition, it reflects Amuro Ray's experience as an MS pilot cultivated over the years.

Although its development was only partially completed at the time of its deployment, the ? Gundam proved itself to be a formidable mobile suit. The operating data obtained from the Silver Bullet (Funnel Test Type) was used in its development. It is the first Gundam-type machine to be equipped with Funnels. A newly developed MS control program is installed to account for the ? Gundam's center of mass during the separation and movement of the Funnel equipment.

Incorporating the Psycoframe technology secretly provided to Anaheim Electronics by Char Aznable of Neo Zeon, the ? Gundam was able to utilize Psycommu weapons and channel the emotions and mental energies of a suitable Newtype pilot. When combined with legendary ace pilot Amuro Ray's immense skill and experience, this powerful, state-of-the-art mobile suit was able to almost single-handedly hold the whole Neo Zeon force by just itself, and its Psycoframe was put to the test to determine the history of humanity living on earth.

Following Amuro's failure to stop Char in attempting to drop Fifth Luna, Amuro decided to design a mobile suit that would be able to combat Char's MSN-04 Sazabi. This machine, the RX-93 Nu Gundam, was designed not only to be the true upgrade to the RX-78-2 Gundam, but also to be the ultimate Gundam. Unknown to Amuro, though, Char realized this would be the case and allowed Anaheim Electronics to pass on the psycho-frame technology for the Nu Gundam's use. However, testing of this machine would be interrupted when fighting between Londo Bell and Neo Zeon forces force Amuro and his girlfriend Chan Agi to take the half-completed Nu Gundam with them to save everyone.

Sadly, the lack of testing would easily been shown when, during one skirmish, Amuro's panicking caused his fin funnels to react, forcing Gyunei Guss to kill his captive, Kayra Su. As Londo Bell forces moved to stop Char from dropping Axis, Amuro and Char would go head to head, battling one another and practically ravaging their suits. In the end, another flaw revealed itself - the psycho-frame resonated with high emotions, pushing Amuro's already amazing Newtype powers to new heights, and managed to push Axis away from the Earth. The resonance creates a light that could be seen from Earth. The fate of both pilots however is unknown and remains a big mystery even to this day.


Weapons 

  • Beam Rifle - A high-powered beam rifle with a normal output of 3.8MW. It can be recharged by e-caps and with a greater fire rate than most beam rifles.

  • Beam Saber - The ? Gundam has a standard-issue beam saber stored on its left forearm, which can be drawn quickly to attack enemies in close range.

  • Fin Funnels - A form of remote weapon unique to the ? Gundam. Despite their name, the fin funnels equipped on ? Gundam are in function "bits", since they have built-in generators rather than the E-caps used by funnels. While this made them much more expensive to construct, and allowed less modules to be equipping than the standard, this had the enormous benefit of giving the fin funnels a tremendously long operational time. Circling the battlefield on their own, the fin funnels could be utilized in far more creative and strategic ways than standard funnels. Model number: AEV/PFF93AR.The actual beam fired by the fin funnels was also more powerful, given that they are emitted by a generator instead of an E-cap. The fin funnels also had the ability to generate a unique beam shield, known as a "fin funnel barrier", to provide a defense against both beam weaponry and solid projectiles with lower outputs compared to the beam shield's power consumption. Although these unique funnels proved incredibly effective and flexible in purpose, they were also much larger than the standard funnel, making them easier targets to shoot down. With the help of the Psycoframe technology, Amuro can utilize its fin funnels more effectively by thoughts alone.

  • v-Hyper Bazooka - 280mm bazooka that can be fired from its position on the backpack.

  • Shield - Issued on the ? Gundam is a custom shield emblazoned with Amuro's emblem. It features a built-in beam cannon and missile launchers. Amuro uses it in many strategic ways, such as fooling enemies that he was shot down by leaving the shield and the v-Hyper Bazooka, and attacking enemies once they lower their guards.

  • Large Beam Saber - Stored on the backpack, this beam saber presumably has a higher power rating than the saber stored on the left wrist and is used more often than the standard saber. The saber's pommel is capable of emitting a beam dagger on its end, but it is never seen used.

  • Vulcan Guns - Two head mounted 90mm vulcan guns that have been seen to shred armor.

  • Birdlime launchers - Fires an adhesive substance from the hands that can be used to repair small cracks in colony wall or to restrain soldiers on foot.

  • Dummy Launchers - Stored in the hands the launchers can deploy mobile suit sized dummy balloons as a decoys.

  • Psycoframe cockpit - The cockpit is composed of microscopic Psycommu receptors that allows the pilot to control the suit as if it is his/her own body.

RM260.00
RM260.00 Add to cart
img
SAVERM209.90

MG 1/100 MSN-04 Sazabi Ver.Ka

  • A year after the launching of MG ?Gundam Ver.Ka, the rival mobile suit Sazabi Ver.Ka is rolling out. 
  • New materials are adopted for silver frames. Texture of metal can be got without paint. 
  • The hatches of the funnel containers on the back are openable. 6 funnels are removable. The covers of Apogee Motors open in four directions. 
  • Includes original markings designed by Katoki Hajime. 
  • Besides a beam shot rifle, a shield, a beam tomahawk and a beam saber, a long rifle which is the first plastic model of the long rifle that was drawn on the image board at the beginning is included. 
  • The mono-eye on the head can be luminescent when the LED Unit Green, which is sold separately, is installed. 
  • Hand parts with "Emotion Manipulator SP" are included. All of the finger joints are movable. Even the thumbs base joints can be moved easily. 
  • Runner x31, Sticker x3, Instruction manual x1

RM330.00
RM330.00 Add to cart
img
SAVERM139.90

MG 1/100 Hi-Nu Hi-v Hi Nu Hi v Gundam Ver.Ka

  • Hi-? Gundam joins the MG lineup in Ver.Ka. Under the supervision of Hajime Katoki, a mechanic designer, it appears with a brand-new figure. 
  • Applied the know-how of MG ? Gundam Ver.Ka, it has reproduction of the differences of the armor, weapons and the signature Fin Funnel. 
  • LED unit can be mounted. 
  • Hidden weapons are in its forearms. 
  • The thrusters of each parts are movable. 
  • A large variety of weapons are included. Weapons can be mounted. 
  • Includes a special display stand. 

RM280.00
RM280.00 Add to cart
img
SAVERM167.30

MG 1/100 Full Armor Gundam Ver.Ka (Gundam Thunderbolt Ver.)

  • Thunderbolt's Full Armor Gundam joins the lineup of Hajime Katoki reworks! 
  • All armor is purgable, and the joints feature vinyl seals for added realism. 
  • The missile hatches, cockpit hatch, and even its foot-bottom cleats open! 
  • Chest ducts are buildable in one of two configurations, and the emergency pod can transform and be stowed inside the body. 
  • A backpack with independently-moving arm, an arsenal of weapons, and a stand round out the set!

RM252.00
RM252.00 Add to cart
img
SAVERM54.00

P-Bandai MG 1/100 Crossbone Gundam X-3 Ver. Ka

P-Bandai Exclusive: MG 1/100 Crossbone Gundam X-3 Ver.KA

RM296.00
RM296.00 Add to cart
img
SAVERM131.40

MG 1/100 ZZ Gundam Ver.Ka

MG 1/100 ZZ Gundam Ver.Ka



- The long-awaited MG Double Zeta Gundam Ver.Ka finally appeared!

- A wide range of motion of each part and installation of a core / block system, realization of deformation to each form!
- Shoulder joints are provided with multiple movable axes, securing a movable range that can reproduce action pauses like Double Zeta Gundam.
- The knee joint makes full use of the latest know-how, reproducing deep [bending] while reproducing complex deformation.
- By adopting the 3 axis structure which was not so far in the lumbar region, it is possible to [twist of waist] [bend forward] while having the deformation function.
- It can be transformed into each form such as G Fortress. Adjust the structure and shape of each part to the limit, pursue a form that seems to be aircraft that eliminated the remnants of humanoids.
- Two core fighters are included, and the union scene of the opening can be reproduced.
- Added [Extra Finish] processing to some parts, adding a dignified feeling that can not be produced with molded articles alone.
- By placing lining parts in places without frames, high detail appearance is realized even when deformed.

- accessories
· Double beam · rifle x 1
· Hyper · Beam · Saber x 2
· Hand grip (right and left) x 1 each
· Saber hand (left and right) x 1 each
· Hand for transformation (right and left) x 1 each
· Weapon possession (right) x 1

- Product content
· Molded article x 17
· Foil seal x 1
· Water transfer type decal x 1
· Instruction manual x 1

RM228.00
RM228.00 Add to cart
img
SAVERM131.40

MG 1/100 Wing Gundam Zero EW Ver. Ka

? From [New Mobile Report Gundam W Endless Waltz], Wing Gundam Zero EW Ver.Ka has appeared under the full supervision of Mr. Hajime Katoki!
? Bandai Spirits has announced the release of the new Wing Gundam Zero EW in Version Ka form! 
? This kit will be packed with amazing detailing and of course, decals. 
? Specially designed by Katoki Hajime himself, the kit will offer variety of new molded parts compare to its previous MG version that was released back in 2004.


Accessories included / Package Content: 
? Twin Buster Rifle x1
? Beam saber x 2
? Shield x 1
? Pedestal x 1
? Foil seal x 1
? Water transfer type decal x 1

RM198.00
RM198.00 Add to cart
img
SAVERM11.00

Daban 6651 MG 1/100 Hyaku Shiki Kai and Mega Bazooka Launcher

Daban 6651 Hyaku Shiki Kai and Mega Bazooka Launcher

- Exchangeable heads
- Scale 1/100
- Grade : Master Grade

Please note that this is not Bandai products

RM139.00
RM139.00 Add to cart
img
SAVERM155.40

MG 1/100 Zeta Gundam Ver.Ka

Marking the 20th anniversary of the Master Grade Ver.Ka series is the incredible MG Zeta Gundam Ver.Ka from "Mobile Suit Zeta Gundam"!

The proportions of the Gunpla are based on Kazumi Fujita's sketches of the Gundam for the anime. The structure and shape have been refined to ensure that there is no breakdown in the form between both the MS form and the Waverider form, and the transformation mechanism has been expertly constructed.

The MS form has a wide range of motion, allowing for a greater degree of recreation of poses from the show. The Waverider form can be displayed in a stable manner like a fixed aircraft model by providing a locking mechanism for each part.

The MG Zeta Gundam also features parts with metallic extra finish processing, along with water transfer decals designed by Katoki Hajime.

RM234.00
RM234.00 Add to cart
img
PO PriceRM300.00

MG 1/100 Sinanju Stein (Narrative Ver.) Ver. Ka

This is a P-O Product

Please read all the detail and condition before make order. 
Release Date :  JUN 2024
Estimate arrival : JULY 2024

- P-O Price RM300
- Deposit RM50, Balance RM250
- We will inform to make balance RM250.00 + shipping when stock arrived thru email and Whatapps.
- Deposit payment should be make via credit card or bank transfer. 
- Deposit payment are non-refundable. 

Important Note :
This item is under allocation. There is risk/possibility that our stock might not be fulfilled by the manufacturer. Only preorder this at your own discretion. However, if your preorder is not fulfilled, we shall refund in full amount of deposit paid back to you.

###############################################################

This Master Grade model kit of the Sinanju Stein, as seen in "Mobile Suit Gundam Narrative," features an updated design! The engraving on the Sleeves emblem is divided into parts for ease of assembly; the beam axe can be connected and equipped as a long-beam naginata, and the beam parts can also be deployed while attached to the shield. Emotion Manipulator SP is used for the hand parts, and each finger can move independently! The flexible leg thrusters can be moved independently with their lift arms; the cockpit can open and close, and the vertical movement of the chest block can also be reproduced. Two figures of Zoltan Akkanen are included: sitting and standing. Order this incredible Gundam for your own collection today!

[Includes]:

  • Shield
  • High beam rifle
  • Grenade launcher
  • Beam axe (x2)
  • Bazooka
  • Beam saber (x2)
  • Effect parts (x1 set)
  • Interchangeable hands (x1 set)
  • Figures (x2)
  • Joint parts (x1 set)
  • Stickers

Please note that the first release of this item may be limited, and in some cases it may not be possible to fill all orders at the time of its initial release. Any order not filled at the time of the initial release will be filled by subsequent restocks, but we recommend placing an order as soon as possible for your best chance to receive a piece from the first release!  

DEPOSIT: RM50.00
DEPOSIT: RM50.00 Add to cart
img
SAVERM103.90

MG V-Dash Gundam Ver.Ka

  • Runner x24, Foil sticker x2, Marking sticker x2, Tetronic sticker x2, Instruction manual x2 
  • "V Dash Gundam" as a fully equipped V Gundam Ver.Ka is released. Includes additional equipments such as the "Core・Booster". 
  • Includes two V Head Core Fighters and two Hexa Head Core Fighters. The Core Fighter, Top Fighter, Bottom Fighter, Core・Booster, all four flight mode can be made with a single package. 
  • The Overhung Cannon of Core・Booster becomes a big beam cannon by being attached onto the MS back. 
  • Includes two beam rifles which can be attached to the hard points. 
  • The beam cannon which is attached to the side armor, the missile pod, the two disposable buzzes on both sides are included. 
  • Includes the gatling gun, beam javelin, beam smart gun. 
  • Includes colored parts for foot covers for reproducing V Gundam Hexa. 
  • Includes special joint parts for the action base.

RM216.00
img
SAVERM89.90

MG 1/100 RX-0 Unicorn Gundam Ver.Ka

Veteran mecha designer Hajime Katoki again brings his style to Bandai's popular Master Grade (MG) series, this time with his design of Unicorn Gundam! The titular mecha from the "Mobile Suit Gundam Unicorn" serial novel comes sharply molded on colored runners and is capable of being switched between Unicorn Mode and Destroy (NT-D) Mode. In Unicorn Mode, the all-white Mobile Suit has a horn projecting from its forehead that resembles that of the mythical creature for which it was named. When switching to NT-D Mode, its armor slides open to reveal its psychoframe, the four blades on the shield expand outwards, its unicorn horn opens, and a Gundam face is revealed. Its armaments include four Beam Sabers, a Beam Magnum, Hyper Bazooka, and a shield. Sheets of foil stickers, Gundam decals, and marking stickers are included.

RM210.00
img
SAVERM159.60

MG 1/100 MSN-06S SINANJU Ver.Ka

  • The enemy of the white Unicorn Gundam, the Full Frontal’s Sinanju enters the Master Grade lineup! 
  • Produced by master designer Hajime Katoki, this kit is a stunning rendition of one of Gundam’s most striking Suits!
  • -Multilayer armor parts, redesigned weapons and moving thrusters show off a high level of quality. 
  • Cockpit hatch features a full internal closure system as well as a detailed 1/100 Full Frontal figure, as well as intricate ‘Sleeves’ embellishments across the surface of the Suit. 
  • Accessories: Beam Rifle x1, Shield x1, Beam Tomahawk x1, Beam Saber x2, Grenade Launcher x1, 1/100 Pilot Figure x2, Action Base Joint x1

RM260.30
img
SAVERM40.50

MG 1/100 RB-79 Ball Ver.Ka (30th Anniversary)

- Gundam Plastic Model Kit 30th Anniversary campaign, Master Grade with transparent outer parts! The limited edition comes with an extra transparent outer part at the regular price. Enables enjoyment of the inner mechanical parts!

RM79.40
img
SAVERM120.90

MG 1/100 RX-0 Unicorn Gundam Ver.Ka (Titanium Finish)


- The newly developed pure white Unicorn Gundam in a special "titanium" plated edition 
- The Unicorn's characteristic sparkling white armor has been enhanced with a beautiful plated coating on all the kit's white elements.
- Matching the brilliance of the shining white armor, gold highlights have been recreated using metallic gold decals.

- Accessories: 
Beam Rifle x1
Shield x1
Extra Magazine x2
Hyper Bazooka x1
Beam Saber x4

RM320.00
img
SAVERM39.90

MG 1/100 RB-79 Ball Ver.Ka

  • RB-79 Ball Ver.Ka

RM80.00
img
SAVERM63.90

MG 1/100 RX-78-2 Gundam Ver.Ka

Taken straight from the art of Katoki Hajime comes this Master Grade version of the RX-78-2. With all the detail we've come to expect from the Master Grade line -- a poseable inner frame with armour laid over the top of it -- this is definitely one for your display case! Parts are molded in colour and snap together for ease in assembly; no paint or glue are required.

RM128.00
img
SAVERM20.00

P-Bandai : Expansion Set for MG 1/100 V2 Assault Buster Gundam Ver. Ka

Reissue Date : Jun 2020Estimate Delivery : July 2020
This is an expansion set! MG 1/100 Victory 2 Gundam Ver. Ka sold separately!

---

Expansion parts for reproducing Victory Two Assault Buster Gundam Ver.Ka by jointing with the MS body (sold separately) available in retail stores is released !

---

* MS body is not included with this product.


* Includes the set of weapon parts for reproducing Victory Two Assault Buster Gundam Ver.Ka. -?Additional weapons are reproduced as detachable parts.

-?Victory Two Assault Gundam and Victory Two Buster Gundam can be reproduced by parts reassembly.


* Updated Parts for the MS body included

- Includes updated parts of the newly structured internal frame and parts of exteriors to hold the heavy armaments.


* Reproduced in color moldings in accordance with the MS body available in retail stores.

- The gold parts are made in gold color moldings.


* Includes newly designed "Ver.Ka" markings for reproducing Victory Two Assault Buster Gundam.


-- Set details --

Assault Parts set / Buster Parts set / Updated Parts for main body / "Ver.Ka" Water decal


------------------------------------------------------------------------------------------------------------------


This product is a set of parts for reproducing "Victory Two Assault Buster Gundam" by attaching it?

to MG 1/100 Victory Two Gundam Ver. Ka" (sold separately; available in retail stores).


* MS body is not included with this product.

* To reproduce the suit in the photographs, a "MG 1/100 Victory Two Gundam Ver. Ka"(sold separately) before assembly,?along with this product, are required.

RM178.00
img
SAVERM161.90

MG 1/100 RX-0 Full Armor Unicorn Gundam Ver.Ka

  • Novel version [Gundam UC] The Full Armor Gundam unicorn appeared in the late Master Grade! Fukui the author said , with the cooperation of Mr. Katoki (a mechanical designer), adding new weapons to the Unicorn. A number of packed with gimmicks to reproduce the militants.?
  • Includes armed 27 ++ Beam rifle, bazooka, and hand grenades, armed supplied All nine, 27 items + + equipped with all available weapons!?
  • Armed rich, can be fitted together. Beam rifle, hyper bazooka, Grenade launcher, etc. You can even hand. In addition, hyper bazooka can be fitted to concentrate on other weapons.?
  • Hyper Beam Javelin Armed new design! New design based on the image of Mr. Fukui Javelin was hyper beam. Exposure, such as the psycho-frame, with a large number of gimmick.?
  • Backpack equipped with arms for extra frame. Inset from the bottom of the backpack Folding arm joint so crowded, you can hold firmly.?
  • Besides the shield left and right arms, the back is also equipped ships with a total of three pieces.?
  • Comes with a stand to support the huge back thrusters. In heavily armed, and well Can be displayed. - Accessories: Beam Rifle x 2, saber x 2, bazooka x 2, hand grenades x 4, Missile Launcher with Grenade Launcher x 2 x 2,3, heat saber x 4, shield x 3, Gatling Gun x 6, Hyper Beam javelin x 2, only joint action based Figures x 4, support stand thruster expression x 1, Secret Parts.
Families of Unicorn series in glance:
  • BB-360 Unicorn Gundam
  • BB-360 Unicorn (Expo Version)
  • RX-0 Unicorn Gundam 02 Banshee (MG)
  • ?
  • Unicorn Gundam 02 Banshee (Unicorn Mode)
  • [134] Unicorn Gundam 02 Banshee (Destroy Mode) (HGUC)
  • RX-0 Unicorn Gundam HD Collar +MS CAGE
  • RX-0 Unicorn Gundam Destroy Mode
  • Unicorn Gundam Destroy Mode Titanium Finish
  • RX-0 Full Armor Unicorn Gundam Ver.Ka (MG)
  • RX-0 Unicorn Gundam (MG)
  • RX-0 Unicorn Gundam Ver.Ka

RM318.00
img
SAVERM149.90

MG 1/100 MSN-06S Sinanju Stein Ver.Ka

  • From UC: MSV, the first prototype of the iconic Sinanju- the rough-cut, white Sinanju Stein! 
  • The Sinanju Stein Ver.Ka- an almost pure-white Suit, the Sinanju Stein was designed using data from both the v Gundam and the Sazabi. This unparalleled combination of two of the most powerful Suits from the Universal Century has lead to a Suit with unique proportions and features designed to optimize performance. Of the 22 runners included with the Stein, 15 are completely new, and created for this kit. 
  • Includes marking decals created by Mr. Hajime Katoki, designer of this Suit. 
  • Gundam Unicorn-style Forearm mounted Beam Saber mounting system is included
  • Thruster unit mounted on backpack, can be locked using link arms to enable greater range of movement with the shoulder armor. 
  • Adopts the emotion manipulator for fully posable fingers, and weapons feature a double locking mechanism to hold them firmly in place from both sides.
  • Armed with Beam Rifle, bazooka, and more! 
  • Leg thruster units on the legs linked with connector arm.
  • Known as the return of the -  ??Red Comet, -  ?? Full Frontal's MSN-06S crimson Sinanju started out as the Sinanju Stein- a white prototype that pushed the boundaries of human endurance! 
  • Accessories: Beam Rifle, Shield, Beam Saber x2, Bazooka,
  • Joint for Action Base 1, Figure (standing, seated)

RM270.00
img
SAVERM359.90

MG 1/100 RX-93 Nu Gundam Ver.Ka Titanium Finish

  • Bandai really challenged itself with this kit- just one year after releasing the MG Full Armor Unicorn Gundam Ver.Ka, they -  ve translated the classic v Gundam into a Ver.Ka!
  • Three years before the Unicorn Gundam tested its mettle against the Sinanju, the v Gundam, piloted by Amuro Ray, dueled Char -  s mighty Sazabi! Realized as a highly detailed kit, this v Gundam was redesigned by Mr. Hajime Katoki, and features a streamlined, powerful shape, transforming Psycho Frame, fully jointed manipulators and a full set of marking decals- expect this to be a beautiful kit! 
  • Moulded with a special -  titanium coating -   to make this Suit stand out! 
  • Accessories: Beam Rifle, Shield, Beam Saber (large), Beam Saber (small),
  • Fin Funnel x6
  • Item Size/Weight : 39 x 31 x 12 cm / 1240g

RM600.00
img
SAVERM22.00

[Gao Gao] 015 MG 1/100 SINANJU Ver.Ka

Daban version of MSN-06S Sinanju Ver.Ka

Brand : GaoGao
Country made : China
Code : 015

Please note that this is not Bandai products

Ver.Ka Series: VI Designed and produced by Katoki Hajime 
Total parts count: 454pcs 

Features an accurate rendition of the Sinanju's distinctive organic appearance. The large backpack unit incorporates a sliding feature that moves the external armor when the thrusters are opened. Leg units incorporate flexible thruster units. Features a detailed cockpit with an opening hatch. The head unit incorporates a linked mono-eye mechanism that moves along with the head. The complex form of the shield is rendered with total accuracy. The inside of the shield has a mounting arm for storage of a beam axe. Shield-mounted grenade launcher can be detached and re-attached to the rifle. Includes individual grenade units. Beam Saber and Beam Axe incorporate large "effect parts" molded in translucent yellow. Includes a detailed history of the Mobile Suit and story, written by the editorial staff of Gundam Ace magazine, which is serializing the Gundam Unicorn novel. Includes Gundam Decal markings. Gold highlights can be rendered either with stickers or optional water-slide versions decals.  

Weight: 1120g

RM128.00
img
SAVERM15.00

[Daban] 6619 MG 1/100 RX-93 Nu Gundam Ver.Ka with movable fingles

[DABAN] MG 1/100 RX-93 Nu Gundam Ver.Ka

Series: Mobile Suit Gundam Char's Counter Attack
Grade: MASTER GRADE (MG)
Manufacturer: Daban
Scale:1/100

Please note that this is not Bandai product

RM135.00
img
SAVERM44.90

P-Bandai Exclusive: MG 1/100 Crossbone Gundam X-2 Kai Ver.Ka

P-Bandai Exclusive: MG 1/100 Crossbone Gundam X-2 Kai Ver.Ka

Estimate Arrival : September 2017

RM274.10
img
SAVERM94.90

P-Bandai Exclusive: MG 1/100 Psycho Zaku Ver.Ka Final Battle Ver.

P-Bandai Exclusive: MG 1/100 Psycho Zaku Ver.Ka Final Battle Ver.
Estimate Arrival - November2017

RM444.20
img
SAVERM38.70

P-Bandai Exclusive: MG 1/100 Full Armor Gundam Thunderbolt Ver.Ka Final Battle Ver.

P-Bandai Exclusive: MG 1/100 Full Armor Gundam Thunderbolt Ver.Ka Final Battle Ver.
Estimate Arrival - November 2017

RM368.60
img
SAVERM119.50

MG 1/100 RX-0 Unicorn Gundam 02 Banshee Ver.Ka

Unicorn Gundam Ver. Ka again - Unit 2 Banshe finally rolled out with Ver.

- Change psycho frame to clear yellow.
- Changing colors according to the molding color, Ver.Ka unique marking water transfer decal included.
- Besides Beam -  · Magnum and Shield, weapons parts such as Hyper -  · Bazooka are enriched.

[accessories]
- Beam . Magnum x 1
- Shield x 1
- Hyper  bazooka x 1
- Beam saber x 2

[Product content]
- Molded article x 22
- Foil seal x 1
- Water transfer type decal x 1
- Instruction manual x 1

RM180.00
img
SAVERM30.00

MG 1/100 V2 Assault-Buster Gundam Ver. Ka [Box Dented]

Box Condition: Dented, but item contents are in good condition.

Reissue Date : Jun 2020
Estimate Delivery : Aug/Sept 2020

T h e  U l t i m a t e  M o b i l e  S u i t  o f  t h e  U n i v e r s a l  C e n t u r y
V i c t o r y  T w o  A s s a u l t  B u s t e r  G u n d a m, T a k e s  O f f.

The final form of Victory Two Gundam is reproduced in MG "Ver.Ka" series !
Additional weapons across its body are reproduced by new moldings.
Renewed color moldings reproduce the suit's rich and heavy texture.

* Gimmicks and style coexist in this ultimate Victory Two Assault Buster Gundam "Ver.Ka."
* Additional weapons of the -  Assault Buster - mode, including its heavy weapons and offensive/defensive armaments, are reproduced by new moldings.

* MEGA BEAM RIFLE
- The giant Mega Beam Rifle composed of the barrel unit and the control unit is reproduced by new moldings.
- The barrel unit slides and the grip, aim sensor and the heat exhaust fins include transforming gimmicks.

* V.S.B.R
- V.S.B.Rs on the waist are reproduced by new moldings. Their transformed mode can be reproduced via slide gimmick.

* MEGA BEAM SHIELD
- The Mega Beam Shield is reproduced by new moldings. The three barrier bits can be split and detached.

* MICRO MISSILE POD
- The six Missile Pods on the Waist and Leg parts can be replaced with parts reproducing the hatches either closed or opened.

* MEGA BEAM CANON / SPRAY BEAM POD
- Mega Beam Canon and Spray Beam Pod, additional weapons on the backpack, are reproduced by new moldings.

* Victory Two Assault Gundam and Victory Two Buster Gundam can be reproduced via reassembly.
- Additional weapons and armors can be removed and reattached, allowing the switching between the heavy-armored Assault mode and the heavy-armed Buster mode by reassembling its parts.

* Body's coloring renewed for reproducing its rich and heavy texture
- Its characteristic yellow and gold parts are colored by matte gold coating.
- Also its red, blue, and white parts are renewed to match its image in the original anime.

* Updated Parts for MS main body included 
- Includes updated parts of the newly structured internal frame and parts of exteriors to hold the various armaments of "Assault Buster."

* "Ver.Ka" marking
- Includes newly designed water decal markings for enjoying the "Ver.Ka" Victory Two Assault Buster Gundam.

* Full color package
- The full color package uses newly drawn illustrations by Katoki Hajime.

[Set details]
Victory Two Gundam Ver. Ka body set  / Buster Parts set /  Assault Parts set / Updated Parts for main body / "Ver.Ka" Water decal

RM390.00
img
SAVERM35.80

P-Bandai : MG 1/100 RGZ-91B Re-GZ Custom


The RGZ-91B ReGZ Custom from MSV that was designed by Mika Akitaka arrives in the Master Grade series!

From weapons, backpack, head, shoulder armor parts, and more, this kit offers variety of changes, with entirely new molds and upgraded parts from its old MG Re-GZ model.


Accessories:
- Beam Assault Rifle
- Hyper Beam Saber x 2
- Shield

RM320.00
img
SAVERM100.00

P-Bandai: MG 1/100 XM-X0 Crossbone Gundam X-0 Ver. Ka


The silver Crossbone Gundam lines up with the Ver. Katoki MG kit series! Provided with new molding for certain parts, this kit surely is a nice addition to the collection.

Head
-Blade antenna is produced with entirely new mold

Chest
-Chest duct has been thoroughly reproduced with precise detailing

New forms of weapon arrives!

Butterfly Buster
-A completely new molded weapon for the X-0 model, the butterfly buster can be transformed between gun and sword modes.

Peacock
-Multi-purpose Assault Weapon "Kujaku" is also provided with transformation gimmick, it can be transformed into different modes - Smasher and Buster.

Newly designed "Ver.Ka" marking decals is included in the kit!


[ACCESSORIES]
-Butterfly Buster x 2
-Peacock
-Scissor Anchor x 2
-Heat Dagger x 2
-Beam Saber x 2
-Brand Marker x 2
-ABC Cloak

RM280.00
Malaysia Gundam enthusiasts and fans alike will be delighted to know that the Master Grade (MG) Ver. Ka Gundam models are now available! These models are the latest addition to the BANDAI world-renowned MG Gunpla line, and they are sure to impress. The level of detail and accuracy that has gone into these models is truly impressive, making them the perfect addition to any Gundam collection. The MG Ver. Ka line takes the iconic designs of the Gundam universe to a whole new level of realism.

The MG Ver. Ka Gundam models are made to the highest standards, ensuring that each model is highly accurate and well-crafted. From the intricate details of the weapons systems to the stunning colors, every aspect of these models has been designed with the utmost care. Whether you are an experienced builder or a newcomer to the world of Gundam, these MG Ver. Ka Gunpla models are sure to provide hours of enjoyment and satisfaction. So, why wait? Add the Master Grade Ver. Ka Gundam to your collection today!

In 2002, Bandai started releasing a Master Grade line under the label of “Ver. Ka” (Version Katoki), in honor with veteran mecha designer Hajime Katori. Some of the Ver. Ka kits were produced as a result of annual fan votes.

Showing 1 - 30 of 39 products