Price Clear







Gundam Model Kits

Showing 31 - 60 of 60 products

img
SAVERM574.90

PG 1/60 Gundam 00 Raiser

- 5 years since the release of the last Perfect Grade comes the long-awaited PG 00 Raiser!
- The very first Perfect Grade release from the anime Mobile Suit Gundam 00!
- Equipped with a clutch mechanism to steady the Suit"e;s joints, allowing it to hold dynamic poses with ease!
- Anime-accurate GN Drive included, featuring lights and spinning action. Of course, the head lights up as well.
- More equipment than has you"e;ll ever need!
- High level of detail creates a truly realistic fighting machine.

- Accessories: GN Sword II x1, GN Sword III x1, GN Beam Saber x1, GN Shield x1, GN Missile A/S x1, GN Condenser x1, Particle Disrupting Missile x1, Hand Missile Unit x1

RM925.00
img
SAVERM220.90

PG 1/60 GAT-X105 Strike Gundam

The impressive (and beautifully-designed) Strike Gundam, from Gundam Seed, is the next machine to have received the Perfect Grade treatment! It features superior flexibility -- Bandai's designed an all-new, unique inner frame system for this model, to match the proportions of the mecha designs in the series. 

The waist joints even allow it to bend side to side, and twist realistically! The "camera eyes" light up with internal wiring and a single LED. 

Not surprisingly, a lot of parts are required to create the exquisite detail we've come to associate with the Perfect Grade series -- over 550 ABS plastic parts, all molded in colour, plus polycaps for the joints, die-cast joint parts for stability, and of course the LED and wiring for the head (requires one CR1220 watch-type battery, sold separately). 

Parts are included for a Beam Rifle, shield, Armor-Schneider blades, and of course the positively enormous Grand Slam sword -- this last beautifully plated in silver! 

A challenging project for fans of Gundam, of Gundam SEED in particular, or just Perfect Grade kits!

Technical and Historical Notes/Story line: 

With the outbreak of war, the Earth Alliance's Atlantic Federation begins a secret project to develop mobile suits to counter ZAFT's mass-produced ZGMF-1017 GINN as well as operate free of interference from the N-Jammers. 

The GAT-X105 Strike Gundam is one of five initial prototype suits secretly developed in conjunction with Orb's Morgenroete defense company. Whereas the other Gundams are designed for specific roles, the Strike Gundam is intended to operate in various configurations through the use of Striker packs. Like the other prototype Gundams, the Strike Gundam is equipped with the new Phase Shift (PS) armor technology. 

When in Phase Shift mode, the Strike Gundam is nearly impervious to attacks from shell-firing artillery or melee weapons. However, use of Phase Shift for extended periods of time is a massive drain on the energy battery. 

The basic version of the Strike Gundam is nearly identical to the GAT-X102 Duel Gundam's initial configuration. Its armament consists of two "Igelstellung" vulcan guns, a 57mm beam rifle, a shield and two "Armor Schneider" combat k-nives. Other optional armaments include a bazooka designed for underwater combat. 

In addition to the first unit, Orb later constructs an improved version from spare parts, the MBF-02 Strike Rouge. The Alliance also constructs a third unit, which is later upgraded into the GAT-X105E Strike E. 

The Strike Gundam is later followed by the mass production GAT-01 Strike Dagger and GAT-01A1 Dagger. The first Strike Gundam enters combat in January 25, C.E. 71, when ZAFT attacks Orb's space colony Heliopolis in an attempt to steal the Gundam prototypes. 

Although ZAFT succeeds in capturing four units, the Strike Gundam remains in Alliance control and is initially (and ineffectively) used by Murrue Ramius. However, young Coordinator Kira Yamato is able to modify the incomplete operating system and make the Strike Gundam combat ready. 

Following the destruction of Heliopolis, Kira becomes the Strike Gundam's default pilot and joins the crew of the Archangel. While heading for the Alliance's Alaskan headquarters, the Strike Gundam is severely damaged in battle on April 17 by Athrun Zala's self-destructing GAT-X303 Aegis Gundam. 

The Strike Gundam is later repaired by Orb and passed on to ace pilot Mu La Flaga, while Kira upgrades to ZAFT's ZGMF-X10A Freedom Gundam. The Strike Gundam serves as Mu's personal mobile suit after the Archangel defects from the Alliance and joins the Orb forces and Clyne faction to form the Three Ships Alliance. 

At the war's end on September 27, the Strike Gundam is damaged in a duel with Rau Le Creuset's ZGMF-X13A Providence Gundam and later destroyed while Mu is protecting the Archangel from an attack by the Alliance battleship Dominion. 

Two years after the war, the versatile design of the Strike Gundam serves as the basis for ZAFT's ZGMF-X56S Impulse Gundam.

RM550.00
img
SAVERM309.40

PG 1/60 XXXG-00W0 WING GUNDAM ZERO CUSTOM

  • From the OVA Mobile Suit Gundam Wing: Endless Waltz comes the newest Perfect Grade kit: the Wing Zero Custom!
  • With a wingspan of over 27 inches and a height of 11 inches, this kit’s impressive silhouette eclipses many other Suits both in height and width! 
  • Die-cast joint parts give the Suit a sturdy construction and low center of gravity and enable the builder to tighten them easily if needed.
  • Rear center wings can be expanded with a spring mechanism for cleaning, and the large side wing’s feathers extend to give an impressive wingspan.
  • Shoulder-mounted Vulcan Cannon hatches can be opened, and the cockpit hatch slides forward to open and reveal pilot Heero Yuy
  • Center chest and “eye” cameras light up using included LEDs (batteries required)
  • Rifle accurately moulded, fingers individually jointed and camera eyes moulded in transparent colored elements. 

  • Accessories: Accessories: Twin Buster Rifle, Beam Saber x2

RM590.00
img
SAVERM380.90

PG 1/60 Gundam Astray Red Frame

The Bandai PG 1/60 Gundam Astray Red Frame is exquisitely detailed with great attention paid to reproducing its intricate mechanisms.

RM699.00
img
SAVERM657.00

PG 1/60 Wing Gundam Zero Custom (Pearl Mirror Coating Version)

1/60 scale Perfect Grade Gundam. This kit is just like the original but with special metallic pearl coating. The regular version is our best selling Gundam kit (dollar sales) ever! Fans will want this special collectors version.

* Special Pearl Mirror Version - Perfect Grade - 1/60 Scale
* Wing Gundam Zero Custom from New Mobile Report Gundam Wing: Endless Waltz
* Outer frame coated with pearl metallic paint. The wing parts are made half clear coated with pink pearl, glittering in rainbow colors. Antenna and other parts in yellow are finished in gold paint.
* Red parts ae finished in red pearl metallic. Handle on package for carrying.
* Instructions are in Japanese but booklet has very detailed pictures for examples to building. Japanese language is not necessary to build

Package size: 12.5cm x 59.5cm x 35cm

RM1140.00
RM1140.00 Request Stock
img
SAVERM314.90

PG 1/60 RX-178 Gundam Mk-II Titans Color

-Except for the color of the parts, this kit is identical to Perfect Grade Gundam Mk-II kit. 

-That means you get thousands of parts coming together to create one of the most detailed renderings of a robot that's ever been done in plastic -- and the beauty's not only skin deep: under those armor panels are actuators and lots of inner detail.

RM585.00
img
SAVERM200.90

PG 1/60 MS-06S Char's Zaku II

This variation of the kit is molded in the red coloring of the Zaku used by Char Aznable in the series. Has a different backpack unit and leg thruster units than the previously-released green Zaku - MS-06F. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately), operable hatches all over the body (20 locations), and inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Model completion heightL 30cm tall and weighs about 500g. Total piece part: 548pcs re. 

Weight : 1650g

RM460.00
img
SAVERM99.90

PG 1/60 FX-550 Sky Grasper + Aile Striker

The perfect addition to your Perfect Grade Strike Gundam! The PG Skygrasper also comes with the Aile Striker; you can build and display them both on the included display base, or integrate them into PG Strike Gundam. All the parts are molded in colour and snap together for easy assembly; polycaps are included for joints, and Gundam Stickers are included for markings. Note: This is the only additional set designed to fit the PG Strike Gundam. 

Weight : 1046g

RM200.00
img
SAVERM200.90

PG 1/60 MS-06F Zaku II

Bandai's Perfect Grade Zaku is the perfect partner for the PG Gundam. Fully-articulated hands, a moving and illuminating camera eye (requires two LR43 watch batteries, sold separately). Operable hatches all over the body (20 locations) Inner detail at the same, amazing level as that of the Gundam kit (including 24 moving hydraulic dampers). Includes the Zaku machine gun and "heat hawk" axe weapon. Completion Height: 30cm tall and weighs about 0.5kg. Total part counts: 548 pieces Weight: 3kg

RM460.00
img
SAVERM239.90

PG 1/60 RX-78-2 Gundam

This item is a posable, Perfect-Grade injection-plastic kit of an item from the Gundam universe. 626 parts. 31cm high when completed. 
Things don't get much better than this for Gundam fans.

The kit that Bandai has produced is truly amazing. The most striking aspect is the incredible level of INNER detail. It's almost a shame to put any of the cover panels on this thing, because there is so much on the inside that a little silver and black paint will make very interesting to look at. Bandai is aware of this, and is also going to market an optional parts set for the kit that includes transparent body pieces! This is due in December, we're told. That set will also include a light-up beam saber.

What can you say about this kit? Though some weapons are not included (no doubt for a later release), it's just about everything you could hope for in terms of detail and poseability. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this. Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece will be completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

RM480.00
img
SAVERM449.90

PG 1/60 Gundam GP01/Fb

Bandai's newest PG offering is truly deserving of the name "Perfect Grade," and it's also a two-in-one; you can build it as either the GP01 or the GP01Fb! Like previous Perfect Grade kits, this behemoth offers a level of detail and motion that's far beyond what you see in even the biggest Master Grade offerings. Panels and hatches all over the surface open, to reveal inner mechanical details. What's more, after you get done wading through over two dozen runners of literally thousands of parts, you'll have armament for the GP01 including two 60mm Vulcans, two beam sabers, and a beam rifle, as well as the Core Fighter II. For the GP01Fb, there are two extra beam guns, and you can build the Core Fighter II Fb. But that's not all -- the kit also includes the parts to build a hangar/dock (see photos below), with little figures of maintenance workers to position around it! A bonus card with a serial number on it also included. Act now, and add this beauty to your Perfect Grade collection (and don't forget to budget for the shipping costs, this item weighs 5kg/11 lbs.)!

RM750.00
img
SAVERM525.70

PG 1/60 RX-78-2 Gundam (30th Anniversary Limited Model Extra Finish)

It's been a good year so far for Gundam Modellers. Bandai's Gunpla 30th Anniversary campaign has seen some stellar releases and now we are being treated to the Extra Finish Version of the Perfect Grade RX-78-2! Molded in a special finish that really gleams under lighting, this Gundam is otherwise identical to the original kit released in 1998 and features an incredible level of INNER detail. Just about everything you could hope for in terms of detail and poseability is here. Even little actuators in some joints slide in and out like hydraulic pistons when you move them (wrists, etc.). What's more, a watch battery (CR1220) lights the eyes in the head, activated by a tiny switch on the back. Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For a true Gundam hobbyist, there's simply no question about whether you should order this! Even if you don't plan on painting or gluing anything, you should prepare yourself for several evenings of snipping, trimming and snapping before your masterpiece is completed. There are, after all, 626 parts on 23 runners which combine to form a model that stands nearly 31cm high and 13cm wide with 66 moving joints and 29 opening hatches. What fun!

RM794.20
img
SAVERM40.00

[Daban] PG 1/60 Astray Red Frame Gunpla Model Kit for Boy

[Daban] 1/60 Gundam Astray Red Frame (PG)


Series: Gundam Seed
Grade:PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note that this is Non Bandai product

RM280.00
img
SAVERM400.00

PG 1/60 Full Armor Unit + PG RX-0 Unicorn Gundam 2 in 1 Combo (Without LED)


  • This is completed set of PG Unicorn Gundam +  FULL ARMOR EXPANSION UNIT FOR PG UNICORN 2 in 1 combo
  • PG Unicorn Set:
  • Fully transformable (Face guard "expansion" included)
  • "Third form" realized
  • Red psychoframe in special glow plastic
  • "Transformation" uses magnet in antenna; Interior of the antenna is gold color
  • Articulation of the elbow and knee joints able to perform a wide range of movements
  • Psycho frame UV emission by incorporating a dedicated LED unit (sold separately)
  • Accessories: Shield, beam magnum, beam Magnum for spare magazine, beam Gatling gun × 2, saber × 4 (beam parts × 2), hyper-Basuka, dedicated display base
  • Height Approx: 361mm
  • This is pre-painted plastic model kits and require snap-fit assembly only.

RM1180.00
RM1180.00 Request Stock
img
SAVERM15.00

P-Bandai Exclusive: PG 1/60 Banshee Expansion Unit Armed Armor VN/BS [Reissue]

Reissue Date : August 2020
Estimate Delivery : Sept 2020

  • A complete new type of PG-compliant, thorough reproduce the Armed armor VN and Armed Armour BS!
  • MS body (PG Unicorn Banshee Norn) is not included in this product, this is only expansion units given.
  • the same scale figure of Marida Cruz is included (falling)
  • The set includes: Armed Armor VN / Armed Armour BS / water transfer decals / same scale figure
  • This is prepainted plastic model kits, require simple snap-fit assembly only.

RM265.00
img
SAVERM30.00

[Daban] PG 1/60 GAT-X105 Strike Gundam Figther

[Daban] 1/60 GAT-X105 Strike Gundam (PG)

Series: Gundam Seed
Grade:PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note that this is not Bandai product 

RM250.00
img
SAVERM0.00

P-Bandai : PG 1/60 RX-0 Unicorn Gundam (Final Battle Ver.)

Commercialized in perfect grade series.
Reproduce the green of Psycho frame in green clear molded, shielded funnel deployment scene can reproduce!
Green of Psycho frame are make up of Green clear molding of condensing material, and reproduce the impressive green frame.
When equipped with the LED unit (sold separately) also, as the Unicorn Gundam of red Psycho frame of over-the-counter sale, emission representation of different flavor is I enjoy.
It reproduce the shield funnel 3 groups coalesced scene!
In the play, shield independent maneuver, reproduce the deployment scene as a funnel 3 groups of shield, 6 Ding and bundled beam Gatling gun of.
Beam Gatling cancer, 2 Ding was allowed to laminate, can be equipped to shield the back.
Shield equipped with a beam Gatling cancer, a dedicated joint parts of accessories,
In Action base 1 of Ramekuria molding, display can be in a state of combining the 3 groups.
Water transfer decals included with the new design is different from the red frame of the over-the-counter sale Unicorn Gundam, it comes with a water transfer decals transitional Hajime produced.
Set included Beam Magnum, Hyper Bazooka, Beam Saber, Beam Gatling Gun  x 6 and Shield x 3.
This is pre-painted plastic model kits and require snap-fit assembly only.

RM1599.00
RM1599.00 Request Stock
img
SAVERM150.00

[Daban] PG 1/60 Gundam Unicorn 03 Banshee Norn

[Daban] 1/60 Banshee Norn (PG)


Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note that this is not Bandai product

RM350.00
img
SAVERM150.00

[Daban] PG 1/60 Gundam Unicorn Fighter

[Daban] 1/60 Gundam Unicorn (PG)


Series: Gundam UC
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note  that this is Not-Bandai product

RM350.00
img
SAVERM36.00

[Daban] PG 1/60 Skygrasper + Aile Striker PG Sky Grasper Perfect Strike Aile Strike

[Daban] 1/60 Skygrasper + Aile Striker (PG)


Series: Gundam SEED
Grade: PERFECT GRADE (PG)
Manufacturer: Daban
Scale:1/60

Please note that this is not Bandai Product

RM92.00
img
SAVERM300.20

P-Bandai Exclusive: PG 1/60 Unicorn Gundam 03 Phenex With LED

P-Bandai Exclusive: 1/60 Unicorn Gundam 03 Phenex WITH LED

RM2598.80
RM2598.80 Request Stock
img
SAVERM222.50

P-Bandai Exclusive: PG 1/60 Unicorn Gundam 03 Phenex

P-Bandai Exclusive: 1/60 Unicorn Gundam 03 Phenex

RM2173.50
RM2173.50 Request Stock
img
SAVERM398.00

[Limited Production] PG 1/60 RX-78/C.A Casval Gundam

[Limit Production] PG 1/60 RX-78/C.A. Neo Zeon Casval's Gundam EXF Ver.


RM800.00
img
SAVERM271.60

[Limited Production] PG 1/60 RX-78-2 Gundam (Kunio Okawara Ver.)

P-Bandai Exclusive: PG 1/60 RX-78-2 Gundam Kunio Okawara Color Ver.

RM567.00
img
SAVERM399.00

[Limited Production] PG 1/60 RX-78-2 Gundam (Chrome Plated Ver.)

Limited Production : 1/60 (PG) RX-78-2 GUNDAM CHROME PLATE VER


To all GUNDAM FANS! 

This is Bandai's Perfect Grade 1/60 PG RX-78-2 GUNDAM (CHROME PLATED VERSION!) gunpla model kit. 

The truly amazing limited production for certain countries in Asia. One of the best designed inner frame detail even until today. Everything you ever hope for detail and possibility for this model are achieved! Several little actuators, hydraulic pistons are inclusive in the inner frame as well. 

Other gimmicks include wings on the core fighter which fold automatically when you tuck in the nose for docking. For all true Gundam hobbyist, there's simply no question about whether you should order this. 

This is a LIMITED PRODUCTION kit! Don't miss this!

RM799.00
img
SAVERM570.00

P-Bandai Exclusive: PG 1/60 Gundam 00 Raiser (Trans-am Mode)

P-Bandai Exclusive: PG 1/60 Gundam 00 Raiser [Trans-Am] - 2nd Reissue
  • Estimate delivery March 2019
[ACCESSORIES]
  • GN Micro Missile x 8
  • GN Beam Saber x 2
  • GN Vulcan
  • GN Shield x 1 [2 parts]
  • GN Sword II x 2
  • GN Sword III x 1
  • Particle Disruption Missile x 2
  • Hand Missile Unit x 2

RM1780.00
RM1780.00 Request Stock
img
SAVERM116.50

P-Bandai Exclusive: PG 1/60 00 Raiser Trans-Am Clear Parts Set Conversion

P-Bandai Exclusive: PG 1/60 00 Raiser Trans-Am Clear Part Conversion

Estimate arrival Late August 2017

Trans-am clear parts for PG 1/60 00 Raiser Trans-AM ver. , which is sold separately.
Clear orange, are provided for the antennas. Molds separated with clear pink, clear green, and clear red.
GN drive exterior parts of both shoulders are not included.  Armored exterior parts such as GN Sword â…¡, GN Sword â…¢, GN Shield, etc. are reproduced with clear parts.
PG 1/60 Special Stand sold with PG 1/60 00 Raiser Trans-AM ver. 
This kit is getting released to celebrate the 10th anniversary of Mobile Suit Gundam 00 anime series.

RM283.50
img
SAVERM120.00

[Daban] Perfect Grade PG 1/60 Exia Avalanche / Repair with LED

Daban 1/60 Exia Avalanche/Repair


Limited edition including -  

  • PG Exia model kit
  • PG Exia use LED
  • PG Avalanche parts
  • PG Repair parts

Limited stock release

This package does not include Assembly Manual hard copy. Please download the link provided below:

Installation Manual

RM560.00
img
SAVERM547.50

PG 1/60 Perfect Strike Gundam

If you already have the PG Strike Gundam, you can purchase the Premium Bandai Perfect Striker pack expansion pack separately!

The full kit will also include updated armor parts for the original PG Strike Gundam.

[ACCESSORIES]
Yellow LED
Strike Gundam new armor parts
Aile Strike pack (Perfect Strike Ver.)
Sword Striker pack
Launcher Striker pack
New pointers
New molded parts are added to the kit, that includes the newly designed armor parts for its body and head.
Gunmetal inner framing colors! Chrome parts are also provided for the plated parts.
Extra finish parts are also introduced in various pieces of the new armor, resulting in a more sophisticated design.

RM950.00
img
SAVERM5.00

[Nilson Work] PG 1/60 Astray Red Frame Gundam - with Backpack Flight unit, 4 katana, Circle base stand and Water De

* Ready Stock Unit *

Brand : Nilson Work
Scale : 1/60
Grade : Perfect Grade / PG
Model : Astray Red Frame

Package Include :
- Model kits body
- Flight Unit
- Katana  x 4
- PG Stand 
- Dedicated Water Decal

RM475.00
Gundam enthusiasts and model kit collectors, prepare to be amazed by the level of detail and accuracy of BANDAI Perfect Grade Gundam model kits. The PG Gundam series is renowned for its high-quality construction and intricate designs, making it a must-have for any serious collector. From the intricate mechanical parts to the attention to detail in the paint job, the Perfect Grade Gundam models are a testament to the craftsmanship of MegaHouse, the company behind this iconic line of model kits.

Whether you are a seasoned builder or just starting out, the Perfect Grade Gundam series is sure to impress. These PG Gundam models are perfect for those who want to build a truly stunning and accurate representation of their favorite Gundam characters. So, add a piece of Gundam history to your collection today and experience the ultimate in model kit perfection with the Perfect Grade Gundam line.

Perfect Grade (PG) is the ultimate series of Gunpla kits created by Bandai. A 1/60 scale Gunpla kits with significant external and internal details. The Perfect Grade kits are the most expensive Gunpla ever produced and have often been used to develop Master Grade and Real Grade series Gunpla Model Kit.

In 2020, Bandai introduced a new sub-line Perfect Grade Unleased featuring kits with increased complexity and diecast metal parts to commemorate the 40th anniversary of Gunpla.

Showing 31 - 60 of 60 products