Price Clear







Gundam Model Kits

Showing 31 - 60 of 189 products

img
SAVERM23.95

[032] HG 1/144 Gundam Dynames (Trans-Am Mode)

The sharpshooting Gundam Dynames from the first season of "Mobile Suit Gundam 00" takes aim once again in Bandai's HG lineup with the release of this gloss injection-molded kit, which comes molded in colors that mimic its Trans-Am mode color scheme seen in the show! Similar to the 2007-released HG Gundam Dynames but with a different color scheme, it will be articulated with plenty of polycap joints upon completion and will feature foldable GN shields to the front for front guard mode. Its GN sniper rifle can be set up with tripod support and can also be stored on its right shoulder armor. The yellow antenna on its head can be slid down to reveal a gun camera for precision sniping. A sheet of reflective hologram foil stickers is included for detail.


Accessories:
-  GN sniper rifle
- GN full shields x 2
- GN shields x 2
- Beam sabers x2 

RM48.00
img
SAVERM71.88

[018] RG 1/144 Gundam 00 Raiser

  • GW large items following the Exia! Exist beyond the Gundam [Raiser] appeared in the RG!
  • The three-dimensional the Raiser of Real grade unique incorporate a new interpretation, while based on the actual historical research!
  • deep the aircraft characteristics from modern technology
  • Is a characteristic of the aircraft [GN DRIVE] is interpreted as a propulsion engine energy transfer institution. The design of real technology and promotion agencies and high-voltage power transmission line of exploration satellite captured in design.
  • GN DRIVE is fitted with click-type arm of. Can be freely angle adjustment. It is also possible to make the particle storage tank type that appeared in the movie version in the selection formula.
  • Proportion of considering the setting
  • Double O adopted the same Advance de MS joint and Exia is in a high-end models of Exia. While reproduce the successor machine design line in a common joint, and reproduce the distinctive form that is expressed in more Massive.
  • Precision reproduction of Raiser
  • Raiser is equipped with a slide mechanism to wing part, emphasized the linear design-conscious of real stealth fighter. A new interpretation plus actual aircraft in connection part and armed when combined with the body in reference, add a delicate mold.
  • The fully reproduce a variety of armed
  • GN Sword II, GN shield, GN Sword III, GN beam saber is included. Through the joint, can be mounted on the waist or shoulder portion, and the like. And equipped with each armed, sword play action in the play can be reproduced.
  • Each rifle mode, of course GN twin lance form can be replicated. The GN shield concatenates 2 chome, it also possible to braid is equipped on both arms.
  • Accessories: GN Sword II x 2, GN beam saber x 2, GN shield, GN Sword III, riser Sword effect, pilot figure (Setsuna, Suna?)

RM108.00
img
SAVERM72.96

1/100 GN-008 Seravee Gundam

1/100 GN-008 Seravee Gundam

RM142.90
img
SAVERM120.20

P-Bandai Exclusive: RG 1/144 00 Raiser Trans-Am Mode (Gloss Injection)

  • Release already
  • THis is P-Bandai JPN limited release item!
  • The ultimate machine in Gundam 00 anime series- finaly in ultimate trans-am mode!
  • The exterior parts adopted the gross injection molding, and reproduce the aircraft color shining red in metallic molding color shiny.
  • Comes armed: GN Sword III / GN Sword II / GN beam saber / GN shield.
  • This is prepainted plastic model kits, require simple snap-fit assembly only

RM179.60
img
SAVERM32.00

P-Bandai : MG 1/100 Gundam Amazing Exia [REISSUE]

P-Bandai Exclusive: MG 1/100 Gundam Amazing Exia


Reissue Date : Feb 2020
Estimate Delivery : March 2020

RM318.00
img
SAVERM59.80

[021] RG 1/144 Gundam 00 Qan[T]

[21] GNT-0000 00 QAN[T] Gundam (RG)
  • Appeared finally to RG is Quanta hugely popular!
  • CONCEPT
    Pursuing a structure that feel [realistic] from the assembly stage. 
    Exia, followed the history that has been developed in light of the Double O, while utilizing the Advance de MS joint of the same type, reproduce the aircraft characteristics of Quanta. By renew the joint structure and mechanical gimmick, to achieve a high mobile performance and the amount of information.
  • RG ever largest action of
    Such as the Sword by renewed movable shaft position and the movable angle of the arm joints protrude horizontally, it improved posing performance.
    Greatly extend the range of motion of the leg by renewed moving method of waist armor. Achieve a more dynamic action poses.
  • Realistic gimmick that created from historical research based on real technology
    Renewed the GN drive attaching and detaching mechanism, fully reproduce the mechanical removable gimmick by adopting a mounting gimmick that also serves as fixing of the back pack.
    By providing the moving point of up to seven, realizing a flexible arm moving.
    GN shield deployment by the arm is to renew the movable shaft, achieve a high range of motion!
  • GN capacitor mounted frame
    While utilizing the Advanced MS joint of RG Exia the same type, the arm is completely new parts reproduction. The reproducibility capacitor disposed systemically.
  • Bit recombinant gimmick GN Sword V
    Characteristic weapon of double oak Anta - bit recombination gimmick also complete reproduction. Grip is equipped with a slide deployment mechanism. GN Sword bit can be attached to the shield.
  • Accessories: GN Sword V, GN sword bit, GN shield, simple stand, weapon possession (left and right), fist (left and right), the movable hand (left and right), palm (left), pilot figure


Item Size : 31 x 19 x 7.5 cm

RM90.00
img
SAVERM23.90

[031] HG 1/144 GN-001 Gundam Exia (Trans-Am Mode)

  • Setsuna's Gundam Exia from the first season of "Mobile Suit Gundam 00" returns to Bandai's HG lineup, this time molded in sharp gloss injection plastic in colors that mimic its Trans-Am mode color scheme seen in the show! 
  • Similar to the 2007-released HG Gundam Exia but in a different color scheme, the snap-fit assembly kit will be articulated with plenty of polycap joints upon completion. 
  • Weapons include a GN long blade, GN short blade, GN beam saber, GN beam dagger, GN shield, and GN sword that can switch between rifle mode and gun mode. 
  • A sheet of reflective hologram foil stickers is included for detail.
  • Includes 1 x GN Blade. 1 x shield, 2 GN sword, 4 x Beam Saber

RM48.00
img
SAVERM32.60

P-Bandai Exclusive: RG 1/144 Gundam 00 Qan[t] Full Saber

P-Bandai Exclusive: RG 1/144 Gundam 00 Qan[t] Full Saber

  • Estimate Arrival Late August 2017
  • This is a model kit, assembly needed
  • Pre-painted Plastic, no paint requires

RM217.40
img
SAVERM101.50

P-Bandai Exclusive: 1/144 Gundam 00 Seven Sword (RG)

P-Bandai Exclusive: 1/144 Gundam 00 Seven Sword (RG)

RM198.50
img
SAVERM30.00

[EXPO LIMITED] RG 1/144 Gundam Exia (Metallic Extra Finish Ver.)

This is Limited Production items

RG 1/144 Gundam Exia (Metallic EXPO Edition)

RM250.00
img
SAVERM170.00

[EXPO] RG 1/144 Gundam 00 Raiser Trans-Am Mode (Clear Edition)

RG 1/144 00 Gundam Trans-Am Mode (EXPO Clear Edition)

RM190.00
img
SAVERM35.40

P-Bandai Exclusive: HG 1/144 GN-Arms Type E (Real Color Ver.)

P-Bandai Exclusive: HG 1/144 GN-Arms Type E (Real Color Ver.)

*NOTE: RG GUNDAM EXIA NOT INCLUDED*

RM264.60
img
SAVERM29.90

P-Bandai Exclusive: RG 1/144 Gundam Exia R2

P-Bandai Exclusive: RG 1/144 Gundam Exia R2

  • Exia Repair II!
  • This is a pre-painted model kit, no paint require.

RM170.10
img
SAVERM20.00

P-Bandai : MG 1/100 Advanced GN-X [REISSUE]

P-Bandai Exclusive: MG 1/100 Advanced GNX


Reissue : Feb 2020
Estimate Delivery : March 2020
  • Accessories: 
  • GN Beam Saber x 1, Proto GN Lance x 1, GN Shield x 1, GN Beam Rifle x 1.

RM270.00
img
SAVERM497.70

PG 1/60 00 Gundam Seven Sword

- It flees to the battlefield with Setsuna, F · Seiyi who was awakened by the innovator as an aircraft equipped with seven swords and guns. In addition to arming, new modeling parts are also added to the main body. Aircraft that played an active part in [Mobile Suit Gundam 00V Senki] are kitized with PG!

[Sophisticated proportions, redesigned coloring and texture representation]
- Adjust the proportions of each part such as legs, head, shoulder and so on. By new modeling parts, make it more refined impression.
- Adopt molding material that emphasizes texture. Under the supervision of Ebi Ekawa Kanitake, the molding color is completely renewed.

[Armored parts cover variable light gimmicks]
- GN Bustor Sword II reproduces light emitting gimmick by LED.
Newly developing trend-oriented parts of the new organization by understanding the setting shape and conducting detailed guiding analysis / design (patent pending)
- Large Armed GN Sword II Blaster is reproduced in a large size of about 340 mm in total length.
- GN Qatar can reproduce various variations such as mounting on the leg part alone, connected state and so on.
- GN sword II long / short form can be reproduced by replacement, long is grip development in rifle state, short can be reproduced with lead wire using injection type.

- accessories
* GN Buster Sword II x 1
* GN Sword II Short x 1
* GN Sword II Long x 1
* GN Qatar x 2
* GN beam sabel x 2
* GN Sword II Blaster x 1
* Action base x 1

- Product content
Molding product x 44
* Foil seal x 1
* Marking stick x 1
* Dry decal x 1
* 2 GN drives
* LED unit x 2
* Hexagon bolt x 2
* Screw (long) x 4 (short) x 2
Hexagon nut (large) x 2 (small) x 6
* Coil spring x 8
* Rubber seal x 2
* 2 PE sheets x 1 each
* Bis x 1
* Lead wire x 1
* Instruction manual x 1

RM880.00
img
SAVERM42.00

P-Bandai: HG 1/144 Advanced GN-X [Deborah Galiena]

P-Bandai: HG 1/144 Advanced GN-X [Deborah Galiena] 
Release Date: April 2019
Estimate Delivery: May 2019


[ACCESSORIES]

  • Proto GN Lance
  • Advanced GN Beam Rifle
  • GN Beam Saber
  • GN Shield

RM138.00
img
SAVERM100.00

Special Coating : MG 1/100 Dynames Gundam (Third party paint job)

Special Coating : MG 1/100 Dynames Gundam


Ready stock

- Original Bandai product
- Special Coating Version
- Third party paint job

RM450.00
img
SAVERM49.60

P-Bandai MG 1/100 Gundam Exia Repair III / R3

The Master Grade 00 Gundam series has finally added the Gundam Exia's 3rd repair variant that first appeared from the Mobile Suit Gundam 00V: Battlefield Record graphic novel series. 


The kit shares some of its molds from the previously released Gundam Exia RII added with exclusive weapons and equipment for the RIII variant.

RM320.00
img
SAVERM6.00

Daban 00-04 NG 1/100 GN-004 Gundam Virtue

Daban NG 1/100 GN-004 Gundam Virtue
  • Brand : Daban
  • Scale : 1/100
  • TV Anima Version
  • Manual booklet
  • Sticker
  • Excluded stand
Please note that this in NOT Bandai product

RM72.00
img
SAVERM8.92

[GaoGao] HG 1/144 00-48 Cherudim Fighter GNHW/A Gundam

Third Party Brand HG 1/144 00-48 Cherudim Fighter GNHW/A Gundam

Brand : Third Party Brand
Grade : High Grade
Scale :  1/144
Model: Cherudim Fighter GNHWIA Gundam
Series: Mobile Suit Gundam 00

Please note that this is NOT Bandai product

RM26.98
img
SAVERM7.00

[GaoGao] HG 1/144 00-50 Arios Fighter GNHW/M Gundam

Arios Fighter GNGW/M Gundam

Brand: Third Party Brand
Scale : 1/144
Grade : High Grade
Model : Arios Fighter GNGW/M Gundam
Series : Mobile Suit Gundam 00

Please note that this is NOT Bandai product

RM28.90
img
SAVERM189.20

Bandai MG 1/100 Gundam Virtue

  • From Mobile Suit Gundam 00, the Gundam Vache on which Tieria Erde is on board is now in the MG lineup!
  • Pursuing the structure to the utmost limit and realizing the replacement with Gundam Nadre, which is also the biggest feature.
  • The armor can be attached and detached in the image of the setting. The lining parts create a sense of density and stacking.
  • Each part hatch can be slid to reproduce the GN field expansion state.
  • The GN cable on the legs uses resin parts that have undergone hologram processing.
  • The GN cannon on both shoulders expands and contracts, and moves to the upper part of the fuselage to reproduce the attack form.
  • The code part, which is a feature of Nadre, has a multi-layered structure that applies figure modeling technology to challenge detailed expression.
  • Includes Nadres exclusive shield, GN beam rifle, and effects.
  • In addition to the GN drive, a solar furnace is also included as a bonus part.
  • In addition to the pilot suit, a 1/100 scale figure of Tieria in a dress is included.

[Accessories]
  • GN Cannon x 2
  • GN Bazooka x 1
  • GN Shield x 1
  • GN Beam Saber x 2
  • GN Beam Rifle x 1
  • Effect Parts for GN Beam Rifle x 1
  • GN Drive x 1
  • Solar Furnace x 1
  • Figure x 3 types
  • Foil sticker x 1
  • Marking sticker x 1
  • PP sheet x 1

RM290.00
img
SAVERM169.00

Event Limited MG 1/100 00 XN Raiser [Clear Version]

Event Limited MG 1/100 00 XN Raiser [Clear Version]

RM430.00
img
SAVERM208.00

METAL BUILD GUNDAM DEVISE EXIA

The Gundam Devise Exia from "Mobile Suit Gundam 00" is the first entry in the new project from Bandai's "Metal Build" lineup -- "Mobile Suit Gundam 00 Revealed Chronicle"! 

It's equipped with brand-new items designed by "Mobile Suit Gundam 00" mechanical designer Kanetake Ebikawa -- the Proto GN Raster Sword and the GN Devise Backpack. 

These new armaments give the Exia a whole new look! The backpack can be equipped with various parts, sold separately (such as various parts of the Metal Build Gundam Astray High Mobility Test Equipment and the Metal Build Gundam Astray + Proto GN High Mega Launcher), and will be compatible with other GN-drive compatible versions of the Exia. 

Order this spectacular version of the Exia for your own collection today!
  • [Figure Size]: Approximately 18cm tall
  • [Materials]: ABS, PVC, die-cast

[Set Contents]

  • Main figure
  • Replacement antenna (soft)
  • Armed latches for waist replacement (x1 each, left and right)
  • GN Drive
  • Grip for GN sword
  • Parts for GN sword
  • GN shield (x2)
  • GN short blade
  • GN long blade
  • GN beam dagger blade (x2)
  • GN beam saber blade (x2)
  • GN beam saber grip (x2)
  • Rear armor
  • Backpack
  • Proto GN Raster Sword
  • GN condenser
  • Interchangeable hands for backpack (x2)
  • Joints for Astray (x1 each, left and right)
  • Joint parts for display
  • Dedicated base
  • Support
  • Set of auxiliary columns

RM990.00
img
SAVERM22.00

Daban 8816 MG 1/100 Gundam Astraea Type F with Weapon Set Model Kit for Boy

Daban 8816 MG 1/100 Gundam Astraea Type F with Weapon Set 

RM158.00
img
SAVERM20.00

[M.J.H] MG 1/100 Gundam 00 Seven Sword Ver MB

MJH Gundam 00 Seven Sword G Inspection Color Ver MB

Brand : MJH [formerly known as Dragon Momoko]
Series : Mobile Suit Gundam 00
Grade : Master Grade
Size : 1/100

Package include :
1) Action base as usual
2) Double GN big Sword
3) Double GN Big Gun

Package not included:
- Sticker Sheet
- Decal Sheet
- Water Decal Sheet

Note : This is not BANDAI product.

RM170.00
img
SAVERM59.70

Tamashii Nations GN-001 Gundam Exia

-GUNDAM UNIVERSE Gundam Exia started. Drive out the target.

-Gundam Exia appears from the first [Mobile Suit Gundam 00]. Equipped with GN Sword, GN Long Blade, and GN Short Blade to reproduce a voluminous decoration.

-Comes with a large volume GN sword.
-The GN sword can be stored. GN Blade can be mounted on the mount racks on both legs.
-The GN Blade comes with two types of blades, short and long.
-The pose in the play is decided by the stylish modeling arrangement.

[set content]
? Main body
? Replacement wrist left and right
? GN Sword
? GN Long Blade
? GN Short Blade
? Soul stage joint

RM120.00
img
SAVERM12.00

Daban 6653 MG 1/100 Dynames Gundam

Robot Name : MG 1/100 Dynames Gundam
Brand : Daban Code 6653
Type : Plastic Model Kit
Size : 20cm (Approx.)

Please note that this is not Bandai Product

RM98.00
img
SAVERM10.00

[Hobby Star] MG 1/100 Gundam Astraea Type-X Finsternis

[Hobby Star] MG 1/100 Gundam Astraea Type-X Finsternis

- Made in China 
- Brand : Hobby Star
- High Quality 
- MG 1/100 
- Height of Gunpla about 18 cm 
- This product come with Action Base 
- This product come with Dalin Water Decal  
- need to assembly yourself
- LED NOT Included

Please note that this is NOT Bandai

RM180.00
img
SAVERM440.00

P-Bandai : MG 1/100 GUNDAM ASTRAEA TYPE-F (FULL WEAPON SET)

The GunPla Mater Grade series adds the Gundam Astraea Type F that first appeared in the Mobile Suit Gundam 00F and Mobile Suit Gundam 00I manga side story series. This kit is completed with its full weapon system featuring a Proto GN Sword, Proto GN Launcher, GN Hammer, GN Beam Rifle, GN Shield, and NGN Bazooka!


Two types of head pieces are also included in the kit to reproduce the Type F and Type F2 of the Gundam Astraea variations.

A green LED unit (sold separately) is recommendable for the entire build to make the kit look alive!

RM10.00
In the year 2307 AD, fossil fuels have all but vanished and the distribution of energy is unbalanced. Humanity now relies on three large-scale solar power systems controlled by three multinational power blocs: the Union of Solar Energy and Free Nations (Union), the Human Reform League (HRL), and the Advanced European Union (AEU). With this nearly inexhaustible source of energy benefiting only these three powers and their allies, constant warfare erupted around the globe among minor countries for precious fuels and energy. Countries whose economy relied solely on the sale of fossil fuels were plunged into poverty and some even believed that the solar power system threatened the promised land of God, resulting in the twenty-year-long Solar Wars. 

Such a chaotic reality has lead to the creation of a paramilitary organization in possession of four highly advanced humanoid mobile suits called Gundams and a mysterious technology known as the GN Drive. They call themselves Celestial Being, and their goal is nothing less than the complete eradication of war through the use of war itself.

Showing 31 - 60 of 189 products